Question about Cars & Trucks
Is the air fuel sensor the same as oxigen sensor
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: PCV valve for 2004 Hona CRV
PCV Valve Operation:
A vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed, and acts as a system shutoff in case of engine backfire to prevent an explosion in the crankcase.
Depending on your engine size, the PCV is a different style and slightly different location.
Usually they are mounted in a hole on your valve cover.... connected by a vacuum tube.
Some are mounted with threads into the engine block (usually by the oil filter)
On the '04 Crv - it is nearly inaccessible behind the AC compressor and beneath what looks like an old vacuum advance. Most PCV valves today do not need to be replaced, unless there is actual valve failure, which I have not seen happen. I would not be concerned about replacing it.
Thanks for using FixYa - a FixYa rating is appreciated!!
Posted on Feb 21, 2009
SOURCE: P1298 Code Fuel/Air Metering
Are you sure you wrote the correct code. According to Honda, P1298 is a high ELD circuit voltage. If what I just put is correct, Honda has a service bulletin as this is a common problem( it could be another fault, but this is the most likely choice).
The ELD has a bad solder joint. I have done several of these, you will need to replace the ELD, and this is how.
1 D/C the negative battery cable (make sure you know your radio code, it will be needed to use the radio again)
2 Unbolt the fuse box that is in the engine bay.
3 Attached to the fuse box underneath there is a plastic cover, remove this cover.
4 There is a 3 pin connector under this cover. Remove it
5 Flip the fuse box back over, there are 2 big fuses bolted down, a 40 A and a 80A
6 Under these fuses is the ELD, remove it and pull the bar that sticks out of it.
7 Stick the bar in the new ELD
8 Put everything back together. Do the idle learn (just idle the car for 10 minutes with no loads on such as radio, headlights etc..)
This is probably the first thing they will do if you bring it to Honda assuming the code you have is P1298.
Posted on May 07, 2009
SOURCE: 2002 honda crv air filter change
Can you specify if you are referring to the engine intake air filter or the cabin air filter?
If you are referencing the cabin air filter, the attached youtube video should help.
I originally created the video for the Odyssey, but found out after looking at my dad's CRV that it is essentially the same procedure as the Odyssey, and have also noticed that the same stands true for most Honda vehicles built between 2005 and 2009.
Posted on Jun 04, 2009
Tips for a great answer:
Sep 13, 2011 | 2004 Honda CR-V
Aug 26, 2011 | 2002 Honda CR-V
Apr 20, 2011 | Honda CR-V Cars & Trucks
Aug 12, 2010 | 2002 Toyota Tacoma
Jun 12, 2010 | 2002 Honda CR-V
Oct 26, 2009 | 2002 Honda CR-V
Oct 26, 2009 | 2004 Honda CR-V
Aug 28, 2009 | 1997 Honda CR-V
May 15, 2009 | 1989 Honda Civic
78 people viewed this question
Usually answered in minutes!