Question about 2000 Pontiac Grand Am GT
I am trying to change the power steerin lines on a 2000 Grand Am but cannot seem to gain access to the line ends where they connect to the rack. Any help would be appreciated>
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
if you replacing only lines for power steering you dont have to take out the belt but on other side of linens are very hard to disconnect from the rack and pinion...
you have to lift and secure the front disconnect the lines from pump and fallow he lines and keep disconect the holders from the body when you rich the end you are right under the driver seat you will see the very little open space and you see the bolt that connects linen to rack and pinion you will need long wrench take it out..just take your time ..when placing the new line just make sure it seats good on place and you gonna need the bleed power steering system after changing the lines...
so finally this job is really hard to do if you don't have experience i recommended to you just bring somebody know what he's doing for save time and not to do some job double time.Power steering system is closed system air or heavy leaks can damage your expensive power steering pump and rack and pinion.
Posted on Jul 08, 2009
ram a sharp chissel or pointed head centre punch through the core and prise it out .,than tap the new one in place ,,,there u go bobs ure uncle
Posted on Jan 29, 2009
jack it up put it on jack stands / shake it make sure it's safe . remove tie rod end nuts and split them apart by using a splitter , do both sides .helps if the tires are removed, then unbolt the hoses from either the pump or rack then there's only a couple of bolts and it's out /ready to reverse and put in a new 1. then you may need to bleed the steering system again by turning wheel back and forth to work out air . good luck.
Posted on Nov 21, 2009
Tips for a great answer:
Jan 13, 2016 | Pontiac Cars & Trucks
Nov 28, 2014 | 2000 Pontiac Grand Am GT
Jul 14, 2011 | 2000 Pontiac Grand Am GT
Nov 12, 2010 | 1996 Pontiac Grand Am
Nov 01, 2010 | 2001 Pontiac Grand Am SE
Sep 21, 2010 | 2000 Pontiac Grand Am GT
May 18, 2009 | 1995 Pontiac Grand Am
Jan 27, 2009 | 2000 Jeep Grand Cherokee
813 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: