Question about 1995 Buick LeSabre

1 Answer

Installed serpentine belt correctly in 95 buick lesabre--it comes off every time I start--also fluid spun everywhere--what's going on?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Buick Master
  • 2,478 Answers

I think you have your belt wrong. Its turning the power steering pump backward.

Posted on Feb 11, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

arauzvictor1
  • 466 Answers

SOURCE: 2000 buick LeSabre 3800 serpentine belt diagram

Ok sent you a diagram of the belt I hope to serve you Thanks and good luck90dd5bb.jpg

Posted on Jan 17, 2010

ZJLimited
  • 17970 Answers

SOURCE: I need a diagram to replace the serpentine belt on

2001 BUICK LESABRE - V6 3.8L 231ci GAS FI N K

Belt Routing Diagram - Multiple Accesory
bfe315e.jpg

From DAYCO Catalogue

Hope help with this (remember rated this) Good luck.

Posted on Feb 08, 2010

  • 111 Answers

SOURCE: serpentine belt diagram for 95 buick park avenue

there is usually a diagram under the hood next to the radiator or on the hood itself next to the hood latch

Posted on Feb 20, 2010

L67Sunbird
  • 65 Answers

SOURCE: Buick LeSabre Serpentine Belt Routing

Here a Link : Serpentine Belt Routing

Posted on Jul 21, 2010

  • 4044 Answers

SOURCE: can i put on a shorter serpentine belt to by pass

When you go to the Auto parts store and get the part. Tell them you don't have AC and install that belt by passing the AC pulley.

Posted on Sep 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install a belt tensioner for my 93 buick


CAUTION To avoid personal injury when rotating the serpentine belt tensioner, use a tight fitting wrench that is at least 24 in. (61cm) long.
  1. Take note of the belt's routing. Lift or rotate the tensioner using a suitable sized breaker bar in the square opening or box end wrench on the pulley nut. Remove the belt from the pulleys.



0996b43f8021adee.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 8: You can use a box-end wrench on the pulley nut to rotate the tensioner ...


0996b43f8021aded.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 9: ... then remove the belt from the pulleys


0996b43f8021adc9.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 10: Serpentine drive belt routing and removal - 3.8L (VIN L) engine shown, VIN C similar


0996b43f8021adca.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 11: Make sure to note the drive belt routing prior to removing it - 3.8L (VIN K) engine shown


0996b43f8021adcb.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 12: Drive belt removal on a 1992-95 supercharged engine
To install:
Be sure the belt is aligned into the proper grooves of the accessory drive pulleys.

  1. Lift the tensioner, and install the belt onto pulleys. Make sure the belt is routed properly.



0996b43f8021adf6.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 13: Many vehicles have a label you can check to be sure the belt is installed and routed correctly

  1. For 1996-99 vehicles, raise and safely support the vehicle. Install the engine mounting bracket lower spacer, stud and nut.
  2. For 1996-99 supercharged engines, perform the following:
    1. Attach the connector to the crank sensor.
    2. Install the right-hand splash shield, then carefully lower the vehicle.
    Once you have the belt off there should be 1 bolt in the middle of the tensioner losen the bolt and remove the tensioner.
  3. Install the belt guard or reservoir.
  4. Connect the negative battery cable

May 11, 2012 | 1993 Buick LeSabre

1 Answer

I just changed my serpentine belt on my 2002 Buick LeSabre. (The old one split in half). Everything seems to be lined up properly but when I started the car to check the alignment, I heard a loud...


remove the belt and check all the pulleys that the belt drives. sound as if one of the bearings in the pulley is seized making the belt squeal and smoke.

Jul 17, 2011 | 2002 Buick LeSabre

1 Answer

HOW DO I TIGHTEN THE LOOSE BELT AFTER INSTALLATION ON 97 BUICK LE SABRE? REALLY NEED A DIAGRAM TO MAKE SURE I INSTALLED THE SERPENTINE BELT CORRECTLY.


There may be a diagram imprinted on fan shroud. There is a belt tensioner that tightens the belt. Also when installing belt be sure you have grooved part of belt riding on grooved pulleys. And flat side of belt riding on flat sided pulleys.

Sep 13, 2010 | 1997 Buick LeSabre

2 Answers

Serpentine belt installation routing - thank you


Here's the diagram you asked for for the 95 Buick LeSabre


f3d0c98.jpg

Apr 11, 2010 | 1995 Buick LeSabre

1 Answer

I want a diagram of a serpentine belt for a 97 buick lasabre


The Belt Diagram should be on the underside of your hood, however they have a way of disappearing.

If it is not there:
Click on the following free direct Link. It has the correct Serpentine and Drive Belt Diagrams for your 1997 Buick LeSabre 3.8L V6-Cylinder Engine with the different Engine Options (AC/No AC etc.).

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1997/make/buick/model/lesabre/1997_buick_lesabre_drive_belt_routing_diagram.htm

Apr 02, 2010 | 1997 Buick LeSabre

3 Answers

I have a 95 Buick LeSabre and it recently started vibrating when I accelerate. I started only happening when i got to about 50 MPH but has steadily gotten worse. If I let off the accelerator it stops....


check the tires for separations or bulges in the tread face also check the drive axles see if the boots are torn or missing all together,also be sure to check the ball joints and tie rod ends.

Dec 26, 2009 | Buick LeSabre Cars & Trucks

2 Answers

Diagram needed


HELLO THERE: Here is a link that will help you out ok dont forget to rate this soultion this helps me out too 1994 buick lesabre serpentine belt removal 1994 buick lesabre serpentine belt removal. Custom made wrestling belts ... money belt zipper. chest injuries from seat belts. serpentine belt diagram 30 mitsubishi ...beltpedia.info/1994-buick-lesabre-serpentine-belt-removal.html

Aug 15, 2009 | 1994 Buick LeSabre

1 Answer

Diagram to change fan belt on 1993 buick lesabre


the "serp" belt is self-adjusted by a spring loaded tensioner pulley. the proper size wrench or a 3/8" square drive inserted in the tensioner and rotated will release the tension to allow the belt to come off. reverse order to install. DRAW A PICTURE OF THE ROUTING OF THE BELT AROUND THE PULLEYS BEFORE REMOVING CURRENT BELT!!

Aug 02, 2008 | 1993 Buick LeSabre

Not finding what you are looking for?
1995 Buick LeSabre Logo

437 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...