Question about 1995 Jeep Grand Cherokee

3 Answers

Wont Crank I have a 95 Jeep Cherokee 6 Cylinder. Every since Saturday the truck has been having problems? it wont crank. Friday night I drove the car parked it Saturday night came and tried to crank it but it wouldn?t start Sunday we got up and thought it needed a jump still nothing. A mechanic came looked at it and changed some round looking disk in the starter and the router belt still nothing (after checking fuses and other things) Monday he put in a new distributor cap and still nothing. Later Monday night we got home and just out of curiosity tried to crank the car and it started right up. Tuesday drove it to school and after school it again wouldn?t start back up. Please Help Me?.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Check starter ,starter wiring &check battery

Posted on Dec 11, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You have a bad ignition switch . Your ignition switch is not holding in run position. Test ignition switch

Posted on Oct 31, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

Im thinking its the starter..i would take it out and brin it into like an autozone they test them for free..

Posted on Oct 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

95 jeep grand cherokee larado 6 cylinder, wont start


Reset the timing and check starter ot see if working. Verify fuel pump is actually pumping fuel.

Jan 21, 2013 | 1995 Jeep Grand Cherokee

2 Answers

1996 jeep cherokee, wont crank in neutral or park. It did it on saturday, then rectified itself. Now its done it again and wont start. All the lights etc work and the fluid levels are fine. Any ideas?


remove switch wir the small one from starter motor when it won't crank and test with a test light to see if it has power when key in crank position if has power starter motor or starter solenoid is bfaulty. if no power could be ignition switch or possably immobilizer fault.

Mar 09, 2011 | 1996 Jeep Cherokee

2 Answers

2000 jeep cherokee 6 cyclender will crank but wont start


could be anything from a crank sensor to a ignition module ,please call a local mechanic to have a look because its very difficult to diagnose this sort of fault without having my greasy hands under the bonnet ,

Mar 11, 2010 | 2000 Jeep Grand Cherokee

2 Answers

2001 jeep cherokee cranks but wont start and has


If all the fuses are good,replace the crank shaft sensor,this is the problem.

Jan 04, 2010 | 2001 Jeep Cherokee

2 Answers

95 jeep cherokee country 6 cyl auto. wont crank all the time


Bad solenoid i would guess. Not making a connection there. Any basic wiring and ignition switch problems should be alleviated by jumping the starter with a screwdriver. I would check the solenoid and starter brushes

Dec 30, 2009 | 1994 Jeep Cherokee Country

1 Answer

95 jeep cherokee seemed to run fine but left overnight it wont


You changed the ignition coil from distributor right?
secondly make sure distributor is not internally shattered (which is a common problem). Normally the current comes from Crank sensor or cam shaft sensor !

Jun 16, 2009 | 1994 Jeep Cherokee Country

1 Answer

Wont Crnk


did ya get it goin???? havent heard from you???????

Oct 26, 2008 | 1995 Jeep Cherokee

1 Answer

1992 jeep engine problem


hello did you get your question answered?
how was the support
thanks
paul

Oct 24, 2008 | 1995 Jeep Cherokee

1 Answer

Wont Crank


It's probably one of these:

1.NSS- (Neutral Safety Switch)
2.CPS- (Crankshaft Position Sensor)

**Look here-
CPS 1/2 way down..
http://www.lunghd.com/Tech_Articles/Engine/Basic_Sensors_Diagnostics.htm

**And here-
NSS.. .
http://www.cherokee-jeep.com/1-2swremov.htm

Oct 24, 2008 | 1995 Jeep Cherokee

1 Answer

1994 jeep cherokee starting problem


it is the crankshaft sensor try that and i bet youll get it

Jul 04, 2008 | 1994 Jeep Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...