Question about 2005 Pontiac Montana SV6

2 Answers

Pontiac montana sliding door panel

Removal of lh interior sliding door panel

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Welcomed to Sears Defrayal Admittance Solutions of Politician, the advertizing garage threshold direction in Leader, Texas. We put and duad mercenary doors, unsettled up doors and advertizing transparence doors.
<a rel='nofollow' href="http://www.searscommercialdoorshouston.com/">Commercial Repair</a>

Posted on Jun 06, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 5,370 Answers

For Doors not getting open with remote or key problem,there are help links provided below.Click the link below to go through its procedure and troubleshoot the problem:----
drivers side front door will not open from inside or outside?

http://technoanswers.blogspot.com/2012/01/ford-f-350-crew-cab-drivers-side-front.html

----------

Car door will not close?
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html

--------

All power door locks not working ?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

----------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html
---------------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

----------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

---------
Truck Door will not close?

http://schematicsdiagram.blogspot.com/2011/12/ford-truck-door-will-not-close.html

-----------
Where is Cars Door control Module located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-cars-door-control-module.html

--------
Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

-----------
Door ajar light stays on?

http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

----------
Door locks not working?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
Front Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

---------
Rear Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

--------
How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

--------
Doors will not open with Remote?

http://schematicsdiagram.blogspot.in/2012/02/lexus-doors-will-not-open-with-remote.html

--------

How to replace Door Hatch ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-hatch-on-acura-integra.html

---------

How to remove Doors?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-doors-on-acura-integra.html

-------`-

How to Replace Doors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-doors-on-audi-a4-and-vw.html

--------

Remote will not unlock Rear door?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html

--------

Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html

--------

This will help.

Thanks.

Posted on Feb 29, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 46 Answers

SOURCE: removing front door panel

there will be two bolt that are hidden under your arm rest they will probably be hidden little caps that just pop off most likely a star screwdriver you will need a window handle remover tool if you have power windows dont worry about it but you will also need a door panel clip remover tool or you can get by with a screwdriver covered in a cloth insert at bottem of the door an gently pry untill the door clip start to pop and release you will also need to remove a screw where you open the door from the inside hope you get it off if you break any of the door clips(happens all the time) just take broken one to the dealer or canadian tire or parts jobber hope this helps

Posted on May 28, 2008

  • 1 Answer

SOURCE: low beam headlights not working on 2004 Pontiac Montana extended

You headlight lamp have a diffuser mechanism which allows it to flip between the hight beam and low beam feature of the bulb. In fact, you high beam will function even if the low beam is not working.

I would recommend the purchase of the new headlight lamp. It would cost you you any where from $15.00 per unit to get a replacement lamp

Posted on Jan 06, 2009

countrysi248
  • 443 Answers

SOURCE: Can't figure how to remove right rear door panel on 2001 Pontiac

These are bad about those Cable operated window devices .. If it is bad get on ebay and get one ordered its your best bet.. Just take a flat screwdriver and go around the bottom of the door panel and pop it loose and up the sides .. there might be a hidden screw or two in the middle around the handles.. good luck ..

Posted on Jan 25, 2009

polarcycle
  • 1392 Answers

SOURCE: how to remove interrior door panel pontiac G6 and replace broken

Remove any bolts/screws you can see then get a plastic crowbar and pry it off. Should have little plastic push pins holding it to door. Make sure you remove all screws though.

Posted on Mar 06, 2009

daves944
  • 1050 Answers

SOURCE: 2003 Pontiac Montana Front Wheel Bearings

Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.

Posted on Apr 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pontiac Montana interior lights wont shut off


sounds like the door switch has failed .

Mar 25, 2015 | 2001 Pontiac Montana

1 Answer

Pontiac montana 2002 interior fuse block removal


If the other windows are working, it would not be a fuse issue. You will have to take the inner door panel off, and check if the wires are getting to the motor, and not broke.

Apr 28, 2012 | 2002 Pontiac Montana

1 Answer

How to replace " cabin


The 2001 model Aztex has 2 cabin filters, they usually come 2 to a box when you buy them.
The charcoal carbon filters are the best.

Removal:

•Open the IP compartment door.
•Remove the rear inside IP compartment door.
•Open the HVAC module assembly access door
•Remove the RH passenger compartment air filter from the HVAC module.
•Slide the LH passenger compartment air filter to the HVAC module opening.
Remove the LH passenger compartment air filter from the HVAC module.

Installation Procedure:

•Install the LH passenger compartment air filter into the HVAC module opening.
Slide the LH passenger compartment air filter toward the left side of the HVAC module.
•Install the RH passenger compartment air filter into the HVAC module opening.
•Close the HVAC module assembly access door.
•Install the rear inside IP compartment door.
•Close the IP compartment door.

I Hope this information is helpful.

Sep 03, 2011 | 2001 Pontiac Aztek

1 Answer

Changing the window motor driver side


Hello,

To change the window motor driver side, follow the steps below:
  1. remove 1 visible bolt left side of arm rest
  2. Pop out window switch/door lock/ mirror adjustment control panel with a screwdriver
  3. Use panel remover or just pull on interior panel to remove must slide it off of door handle
  4. Slide control switch panel down through hole you popped it out of
  5. Pull vapor barrier loose bottom right side to expose coiled spring and window motor
  6. Tape window in the up position using masking or package tape
  7. Mark a straight line across coil spring to make sure you can realign it when reinstall
  8. Use tool j-38864 connect it near outer part of coil sprint where it hooks to retainer or in a pinch use pointed vice grips at same location ensuring they are firmly locked on spring ( be very careful, I'm not responsible for any injury if you are not)
  9. Force spring clockwise to disengage it from it's retainer point
  10. Pull spring slightly outward just enough to clear the retainer point and slowly let it uncoil counterclockwise and let it sit there
  11. Disconnect wire connector from right end of window motor
  12. Use your hands and push 3 plastic retainer points outward as you lift up on window motor to disengage from retainers careful not to break the plastic retainers comes out pretty easy
  13. Install new motor into the plastic retainers, make sure filly seated ( lining up plastic Guides into holes in motor (3 points)
  14. Reconnect wire connector to new motor
  15. Use J38864 or vice grips to recoil spring, resit it to retainer point as before you have to be very careful in order not to hurt yourself
  16. Remove tape from window and test up/down switch ( key must be on)
  17. Reseal vapor barrier in place as it was prior to starting
  18. Slide switch control back up through hole in door panel from where it mounts
  19. Slide door over door handle
  20. Align retaining clips to holes and push them home with gentle raps of your hand start at the top and work downward on panel
  21. Replace both bolts in arm rest
  22. Pop window/door lock control panel back in place
That is how to change the window motor of the drivers side of a 2000 pontiac montana.

Take care and good luck

Jan 06, 2011 | 2000 Pontiac Montana

1 Answer

Car power window failed - need to get closed


You would have to remove door panel and remove the two nuts fastening the window to the window motor regulator then slide window up and use tape to hold it up until you can get it repaired

Nov 26, 2009 | 2000 Pontiac Montana

1 Answer

04 pontiac montana sliding doors no longer work


the sliding doors on montana assuming there power have a electrical harness on the bottom track that break and jam the doors but unlikly both have this problem do the doors lock @ unlock if not check switch at drivers door

May 27, 2009 | 2003 Pontiac Montana

1 Answer

1999 Pontiac Montana passenger sliding door stopped working.


Verify the wiring harness which passes under plastic step & carpet at front passenger side. This wiring harness goes from the firewall to the pillar on the right side and some have crimped connectors in them to act as junction between two or more wires (ususlly the 12volt feed), which deteriorate with time, especially with Salt & Water. Then the electric sliding door stops working and even driver the electric seat can loose power.

May 17, 2009 | 1999 Pontiac Montana

1 Answer

How do I replace the interior LH door handle 97 Jeep Wrangler?


you will need a t-20 or t-15 torx bit driver to remove 2 screws holding the handle this is all that holds them on, on once you have a replacement handle it is easier to remove 2 lower screws on the door panel and unsnap the door panel to loosen it this will allow space making it easier to reinstall new handle just slide each end into the slot and reinsert 2 screws to not fully tighten until door panel is snapped back in. the panel is held on with clips and can be released using plastic pry tool around door panel edges.

Nov 22, 2008 | 1991 Jeep Wrangler

Not finding what you are looking for?
Cars & Trucks Logo

1,538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...