Question about Cars & Trucks

Open Question

Torque sequence for an oil pan in a 2001 dodge caravan sport 3.3L

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

c17hydro
  • 2984 Answers

SOURCE: What is the sequence for the bolts on oil pan, for

For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Posted on Jul 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tighing sequence for oil pan on 96 Dodge caravan


Note the picture. That is for 3.0L,but, the other engines should be about the same. The actual torque spec is in inch lbs depending on engine size
25661956-chr4ovfijeufamn1wbyoau23-5-0.jpg

Apr 23, 2015 | Dodge Cars & Trucks

1 Answer

How to replace oil pan gasket dodge caravan 2005 3.3l


jack up on jack stands, drain oil, remove all pan bolts, clean pan, use new gasket, replace bolts to torque specs do not over tighten it will tear the gasket. DO NOT USE GASKET SEALER OR PERMATEX IT MAKES GASKET SLIP

Mar 09, 2015 | 2005 Dodge Caravan

2 Answers

00 Toyota Rav4 oil pan bolts sequence and torque spe?


Nice writeup from Autozone to help you with the replacement oil pan for your '00 Rav4:
Repair Guides Engine Mechanical Components Oil Pan AutoZone com

Dec 10, 2014 | 2000 Toyota RAV4

1 Answer

CYLINDER HEAD BOLT


torque sequence on heads is middle first then stagger to next front then next rear and so on . 50 % of recommended torque on all then final torque all.

Mar 20, 2014 | 2001 Dodge Grand Caravan

1 Answer

How to change oil pan gasket for 2005 dodge caravan


Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004

Oil Pan - Removal & Installation

2.4L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Structural collar A/C compressor bracket to oil pan bolt Oil pan
  4. Clean the oil pan and all gasket mating surfaces.
To install:
  1. Install or connect the following:
    Oil pan gasket to the block after applying engine RTV at the oil pump parting line Oil pan. Torque the bolts to 105 inch lbs. (12 Nm). Structural collar Negative battery cable
  2. Fill the crankcase to the correct level.
  3. Start the engine, check for leaks and repair if necessary.

3.0L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Starter motor Front motor mount bracket Bending braces Torque converter dust shield Oil pan

    e6c7cfd.jpg
    Fig. Oil pan mounting bolt tightening sequence-3.0L engine

To install:
  1. Clean the oil pan all mating surfaces.
  2. Apply RTV gasket material to the oil pan.
  3. Install or connect the following:
    Oil pan. Tighten the bolts in sequence to 50 inch lbs. (6 Nm). Torque converter dust shield Bending braces Front motor mount bracket Starter motor Negative battery cable
  4. Fill the crankcase to the correct level.
  5. Start the engine, check for leaks and repair if necessary.

3.3L & 3.8L Engines
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:
    Negative battery cable Engine oil dipstick Drive belt splash shield Strut to transaxle attaching bolt and loosen the strut to engine attaching bolts Transaxle case cover Oil pan fasteners Oil pan and gasket

To install:
  1. Clean the oil pan and all mating surfaces.
  2. Apply a 1 / 8 inch bead of gasket material at the parting line of the chain case cover and the real seal retainer.
  3. Install or connect the following:
    New gasket on the oil pan Oil pan. Torque the bolts to 105 inch lbs. (12 Nm). Transaxle case cover All bending brace bolts Drive belt splash shield Engine oil dipstick Negative battery cable
  4. Fill the crankcase to the correct level.
  5. Start the engine, check for leaks and repair if necessary.

Hope helps (remember rated this).

Jun 24, 2010 | 2005 Dodge Caravan

1 Answer

I need to replace the starter on my 2001 dodge caravan sport. Where would I find instructions?


Caravan, Grand Voyager, Town and Country, Voyager, 2000-2004
Starter - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Remove or disconnect the following:
    Negative battery cable Starter harness connectors Starter motor
To install:
Install or connect the following:
Starter motor. Torque the bolts to 35 ft. lbs. (47 Nm). Starter harness connectors. Torque the battery cable nut to 100 inch lbs. (11 Nm). Negative battery cable


Hope this help (remember comment and rated this).

May 14, 2010 | 2001 Dodge Caravan

1 Answer

What is the sequence for the bolts on oil pan, for 2000 dodge grand caravan? What is the torque for bolts for oil pan for 2000 dodge grand caravan?


For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Jul 12, 2009 | 2005 Dodge Caravan

1 Answer

What's the sequence for the bolts on oil pan???


Torque specs on pan aren't really necessary. First put all screws in place to get the pan properly located, (make sure you have put a decent dab of rtv sealant at the corners of the end seals before you put the pan up) Run each screw up to where it begins tightening (but no further) Start with either side center, then the opposite side, then work in an X pattern towards both ends, using enough force to make the bolts secure, but not so they are crushing the gasket. The larger bolts at the corners (where you put the sealant) can be tightened a bit more than the small ones. Let it sit about an hour, then just go over it again. Use a 1/4 drive short ratchet to avoid overtightening, after runing check for any seepage. You can turn those screws a bit tighter to take up for any pan warpage.
Been building engines for a long time and aside from the first time, I never used a torque wrench (specs are in inch pounds, usually 12-15...Ive found that unless you have a brand new pan that is absolutely straight and flat, using those specs often produces leaks.

Jun 15, 2009 | 2005 Dodge Caravan

1 Answer

Need to the torque for the oil pan for a 2005 dodge caravan with a 2.4 engine


Hello rkz3: The correct torque specs for the oil pan is 105 inch pounds. Should you need further help just ask.Thak you for using FixYa. Please rate the information as it helps a lot. Thank you again Roger

Apr 16, 2009 | 2005 Dodge Caravan

1 Answer

2001 dodge caravan sport 3.3 need to know what weight oil it take


The correct oil weight is 5W20, but 5W30 can be used also. Be consistant when using oil, try to use the same brand and always use the same viscosity. This vehicle requires 4.5 liters of engine oil.

Dec 06, 2008 | 2001 Dodge Grand Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...