SOURCE: 2008 Toyota Tacoma Excessive brake pedal
Your dealer is not lying to you.
All of the Toyota product line with ABS has this phenomenon. What Toyota has done is incorporate "Brake Force Distribution" into the braking system. What that means is there is now a sensor on the brake pedal/brake rod, going to the master cylinder. The sensor measures how FAST you press on the brake pedal. This activates the ABS pump, and supplies more brake fluid, harder, to reduce the time needed, such as a "panic stop"; the pedal travel is much longer than you are used to, because of the way they have to measure the speed of the rod being depressed. In actuality, this system is much better than the old system, as it also prevents wheel drag. It just takes a while to get used to. Really, there is nothing to worry about, I explain this same thing to my customers every week.
I hope this helps you out.
Thanks for choosing FixYa for assistance.
SOURCE: wiring diagram Ignition switch
try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: can't find transmission dipstick on 2008 toyota tacoma
there is no dipstick it's a sealed unit dealer only.sorry a lot of vehicle manufacturers have went to this sealed style some ford suv's,tacomas,dodge chargers challengers and magnums.just a few off tof of my head.it's one of those BETTER DESIGNS THEY ARE ALWAYS COMING UP WITH TO MAKE YOU BURN UP A 5000 DOLLAR UNIT IN HOPES OF SELLING ANOTHER TRUCK TO REPLACE THE ONE THATS TORN UP.....SORRY oh ya the transfer case has a regular old check plug 28 mm i think don't quote me could be a 30 or 32 also they changed up on those.
SOURCE: 1986 Toyota pickup stereo wiring COLOR CODES NEEDED
Car Radio Battery Constant 12v+ Wire: Blue/Yellow
Car Radio Accessory Switched 12v+ Wire: Gray
Car Radio Ground Wire: Brown
Car Radio Illumination Wire: Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 4′
Car Audio Front Speakers Location: Dash
Left Front Speaker Positive Wire (+): Pink
Left Front Speaker Negative Wire (-): Purple
Right Front Speaker Positive Wire (+): Green
Right Front Speaker Negative Wire (-): Blue
Car Audio Rear Speakers Size: 5 1/4′
Car Audio Rear Speakers Location: Side Panels
Left Rear Speaker Positive Wire (+): Black
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Red
Right Rear Speaker Negative Wire (-): White
SOURCE: how to wire trailer lights to a toyota tacoma
The easiest way is to get the kit that plugs into the taillight harness to adapt your plug. If one isn't easily available then you can use scotch locks to splice into your trucks harness. Use a test light to make sure you locate the right wires in your trucks harness and go by the wire diagram on the instructions from the plug to hook it up.
I hope this helps!
33 views
Usually answered in minutes!
×