Question about 2005 Ford F 350 Super Duty

Open Question

Where is ecm and pcm located in 2005 ford 6 liter

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: used pcm/ecm for a 2001 Ford Expedition

1st it must be the correct engineering number, not just the same year, but the exact same number on the sticker. then it must be programmed by the dealer

Posted on Nov 03, 2009

  • 5370 Answers

SOURCE: What is the PCM in

The pcm is located Under the windshield wiper coil on the passenger side of the engine compartment, where water can collect.And yes if its get wet it can get short.The radio,the ac the lights and other electrical functions works intermittently .The cost of pcm is near to $1000.You can get it from autozone service center or from local auto part stores. ---------This will help.Thanks.Helpmech.

Posted on Dec 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Ford f350 diesel 6.0 liter Where is the pcm location


This is on a 2006 don't now if yours the same
You need to remove the driver side battery and then the pcm is located on the inside of the fender just behind were the battery was and I believe that there are 2 10m bolts holding the pcm in there and unbolt it and look at the bottom of it, should have 3 letters and a number.

Dec 16, 2016 | Ford Cars & Trucks

1 Answer

2005 ford fiesta does not supply power to distributor after changing engine due to a bearing knock.


ECM/PCM has to be matched up to engine. Talk to Ford service about it. don-ohio (:^)

Dec 06, 2016 | 2005 Ford Fiesta 1.3

1 Answer

2005 ford 500 how do you flash the ecm yourself


Do you have a few thousand dollars ? You need to buy a J2534 pass through tool , an pay ford for the info to program into the PCM/ECM , a battery maintainer is also needed , a class on how to do it would also be a good idea . Scan Tools Vehicle Flash Programming and J2534 Basics How to Reprogram Ford PCM
your best to leave this to the dealer !

Nov 10, 2016 | Ford Cars & Trucks

2 Answers

Where is the ECM on a 2001 E350 ford


Hi there:
The ECM (Engine Control Module) is under the hood on the left side above the master cylinder area. Just follow the wires...


10_27_2012_1_23_20_am.png

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Oct 26, 2012 | Cars & Trucks

1 Answer

What does the code p1166 mean on my 2003 rsx type s


DTC P1166: A/F Sensor (Sensor 1) Heater Circuit Malfunction


  1. Reset the ECM/PCM.
  2. Start the engine.
Is DTC P1166 indicated?

YES - Go to step 3.

NO - Intermittent failure, system is OK at this time. Check for poor connections or loose wires at C101 (located under the right side of the dash), C401 (located under the left side of the dash), C402 (located under under the left side of the dash) the A/F Sensor relay, the A/F Sensor (Sensor 1) and the ECM/PCM.


  1. Check the following fuse:
    • No.14 OPTION (30A) fuse in under-hood fuse/relay box.
    • No.2+B LAF HEATER (20A) fuse in under-dash fuse/relay box.
    • No. 4ACG (10A) in under-dash fuse/relay box.
Are any of the fuses blown?

YES - Repair short in the wire between the A/F Sensor relay and the fuses.

NO - Go to step 4.

94729647

  1. Measure voltage between ECM/PCM connector terminals A1 and A24, 30 seconds after the ignition switch is turned ON (II).
Is there battery voltage?

YES - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.

NO - Go to step 5.

94729648

  1. Measure voltage between ECM/PCM connector terminals A22 and A24.
Is there battery voltage?

YES - Go to step 6.

NO - Go to step 10.


  1. Turn the ignition switch OFF.
  2. Disconnect ECM/PCM connector E (31P).
  3. Turn the ignition switch ON (II).
94729649

  1. Connect ECM/PCM connector terminal E8 to body ground with a jumper wire, then measure voltage between ECM/PCM connector terminals A1 and A24.
Is there battery voltage?

YES - Update the ECM/PCM if it does not have the latest software, or substitute a known-good ECM/PCM, then recheck. If the symptom/indication goes away with a known-good ECM/PCM, replace the original ECM/PCM.

NO - Repair open or short in the wire between the A/F Sensor (Sensor 1) and ECM/PCM (A1).


  1. Turn the ignition switch OFF.
  2. Disconnect the ECM/PCM connector A (31P) and the A/F Sensor (Sensor 1) 4P connector.
94729650

  1. Check for continuity between the A/F Sensor (Sensor 1) 4P connector terminal No.3 and body ground.
Is there continuity?

YES - Repair short in the wire between the A/F Sensor relay, A/F Sensor (Sensor 1) and ECM/PCM (A22).

NO - Go to step 13.


  1. Turn the ignition switch ON (II).
94729651

  1. Measure voltage between ECM/PCM connector terminals E8 and A24.
Is there battery voltage?

YES - Repair open in the wire between the ECM/PCM (A22) and the A/F Sensor (Sensor 1).

NO - Go to step 15.


  1. Check for continuity in the wires between the A/F Sensor and the fuses.
Is there continuity?

YES - The wires are OK. Replace the A/F Sensor relay.

NO Repair open in the wire between the A/F Sensor relay and the fuses.

Mar 17, 2011 | Acura RSX Cars & Trucks

1 Answer

WHERE IS THE COMPUTER IN A 2005 CHEVY MALIBU CLASSIC 2.2 LITER


Hello: Under the hood look in/under the air filter assembly, you may have to take the filter box apart to access the ECM/PCM.

Jan 16, 2011 | Chevrolet Malibu Cars & Trucks

1 Answer

Location of ecu on a 2005 ford freestyle


Keep in mind the definitions:
* ECM = Electronic Control Module (prior 1995 computer, OBD1)
* PCM = Powertrain Control Module (1995 and newer, OBD2)


Ford Freestyle 2005 - Powertrain Control Module The PCM is located in the ine compartment, passenger side, mounted to the cowl. Removal & Installation procedure:
  1. Retrieve the module configuration.
  2. Remove the cowl panel grille.
  3. Disconnect the 3 PCM electrical connectors.
  4. Remove the bolt and the PCM.
To install:
  1. Installation is the reverse of removal.

4f23c78.gif

Hope helps (rememnber rated this).

Jul 14, 2010 | 2005 Ford Freestyle

2 Answers

98 ford escort 2.0 liter, just died while driving, no funny noises or any indication of problems. obd II scanner says (no link), no fuel at the rail, no spark. what all could this be? i've been...


Possibly the fuse to it. Or Rodent damage to wiring harness, If the ecm in fact failed? Something caused it. A surge, A short. Something triggered the failure..

Jun 18, 2010 | 1998 Ford Escort

5 Answers

Hi - We have been told that we have to replace the powertrain control module on our 2005 Escape, as well as 6 coils. We've been given the cost of $800 for the control and $115 for each coil. This sound...


I have a hard time believing all coils have to be replaced. Was this a Ford dealer or an independent that told you this? I would seriously get a second opinion.

Also, if you have any trouble codes, please post them here or look them up http://www.obd-codes.com

Nov 20, 2009 | 2005 Ford Escape

2 Answers

Used pcm/ecm for a 2001 Ford Expedition


If you replace an ecm then you now have a security violation in the vehicle which can only be corrected by the dealer.

Nov 03, 2009 | 2001 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...