Question about Chevrolet Cars & Trucks

Open Question

1993 chev s10 2.8l v6 with throttle body wants to flood out

It wants to flood out

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

66 chrgr
  • 1011 Answers

SOURCE: 1999 S10 Blazer 2WD 4.3L V6. Starts hard, idles rough.

you have a single injector under the intake plenum it has 6 branching fuel leads off of this.A very common problem is the regulator attached to this and it leak off fuel which falls into the intake .causing this problem. it needs to be replaced .i have done at least 80 of these in my career.this will fix your problem.thanks for choosing fix ya

Posted on Mar 04, 2009

  • 7 Answers

SOURCE: 2.5l iron duke will not idle

Scan again & check reading of the ECT sensor,coolent sensor as it may be reading to cold for present temp & just dumping fuel as it is seeing -30c all the time.I as well own a iron duke(1987)

Posted on Apr 07, 2009

  • 4 Answers

SOURCE: need a 03 3.0 v6 awd throttle body, linkage, sensor

Buy it new from many places Search Saturn Parts call local Dealer .
Happy Easter

Posted on Apr 11, 2009

  • 149 Answers

SOURCE: 1991 S10 2.5L throttle body idles to fast

A vehicle that old will suffer from brittle and cracked vacuum lines. I would say there is a bad, or several bad lines leaking away vacuum from the intake manifold. Don't forget to check the hose going to the PCV on the valve cover. A vacuum leak will also cause the engine to stumble and miss intermittently when idling.

Posted on Jun 26, 2009

  • 4669 Answers

SOURCE: 1990 chevy blazer 350 ci throttle body fuel

Sounds like you have an injector leaking. Have someone just cycle the key on and off to run the fuel pump but don't crank the engine. If you see fuel dripping from the injectors, unbolt the injector cover on the throttle body, remove the injectors and replace the orings around the injectors.

Posted on Jul 22, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1993 Pontiac Firebird the has acceleration problems that I could not figure's the v6 3.4 liter

possible weak fuel pump, bad injectors, throttle body dirty, throttle plate dirty, oxygen sensors potentially faulty, possible restriction in the exhaust system, possible poor fuel quality

Mar 21, 2015 | 1993 Pontiac Firebird

1 Answer

I have a '91 chev. s 10 truck 2.8 liter v6. It starts right up but wont hold idle i have to pedal the gas to keep it running

The computer controls idle speed by the idle air control valve on the side of the throttle body. The valve regulates the amount of air entering the intake.
The throttle body could be dirty or the control valve may be faulty.

Sep 21, 2012 | Cars & Trucks

1 Answer

1988 Chev 350 crate motor with throttle body injector throwing so much fuel that the truck is flooding out

I had one with the coolant temp sensor telling the ECU is was -40 in July. Replaced the sensor, was fine after.

Jan 05, 2011 | 1988 Chevrolet C1500

1 Answer

My 1993 cadi deville keeps flooding. gas fills-up in carbator when I turn key on. What's this?

first, the 1993 cadillac deville should have a throttle body not a carburetor. And, I think it has ported fuel injection to each cylinder with a fuel injector for each cylinder if it's like my 1990 Cadillac Deville.

Jun 20, 2010 | 1993 Cadillac DeVille

1 Answer

Can't find IAT, MAF or MAP on a 1993 Chev s10 4.3L, V6, w/carb?


Jun 27, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

I have a whistle noise coming from throttle body area - 1993 chev p32 chasis motorhome slight throttle

It may be the fins inside the air cleaner box. Also check all your hoses and connections to make sure there tight.
Another possibility is a noisy pulley that needs oiled on the bearing only!

Jun 23, 2009 | 1998 Audi A4

2 Answers

Engine wont fire until fuel is poured in throttle body

1993 s-10 should have a 4.3 engine. Your symptoms tell me your throttle body injector is clogged, and only allows so much fuel to pass through it. Therefore, on a idle there is not enough fuel coming through to keep the engine running, or to start it. If you replace the throttle body injector your issue should cease.

I hope this information helps you, and I wish you luck on your repair.

May 05, 2009 | 1993 Chevrolet S-10

1 Answer

1993 Toyota Camry IAC cleaning

1) remove the black intake hose from the throttle body
2) get a can of throttle body/intake cleaner
3) be VERY careful if you decide to use the straw included with the can of cleaner, it can detach and go inside of your intake manifold.
4) spray inside and use a rag to remove junk from throttle plate(front and back side), hold the straw on the cleaner can and spray into the hole just ahead of the throttle plate, let soak for 10 minutes or so
5) reattach intake hose and start engine - you may get black smoke/rough idle for a minute as junk exits the engine

Mar 21, 2009 | 1993 Toyota Camry V6

1 Answer

Gas is flooding thru throttle body when trying to start

eather o-ring is bad or throttle body injecter is cracked

Dec 14, 2008 | 1993 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides