Question about 1996 Dodge Intrepid
For engine misfiring problem check the
help links mentioned below. Click the link below to go through the
troubleshooting procedure :----
Engine misses and truck jumps? Hard to down
shift? Issue with high gear only?
----------- ----------- ------------ http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html -------------- ----------- ---------- This will help. Thanks.
Bad miss at idle?
While stop engine idles like cylinder missing?
Engine Misfire codes for car?
Engine Misfire codes?
Misfire on cylinder 4?
Oil on spark plugs and car misfires?
This will help.
Posted on Mar 03, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
two issues here. this may be a low fluid issue. i would check the level of the fluid first. the next issue could be a blown shift solenoid. these are located inside of the transmission pan.also, check the filter as well.(transmission filter could be clogged)
Posted on Mar 16, 2009
usually wires ign wires & plugs but could be your ignition coil!!test it don"t guys$$ have a spark tester if not invest in one don't bother using a spark plug your just waisting time with that!~
Posted on Jan 04, 2009
Check the wiring first off. Check anything to do with the engine sensors, look over the wires that lead up to the plugs. If you find any that are oily or dirty, pull the plug and clean it out. You might just try generally detailing your engine as well. The second thing to check off the list is vacuum lines, give them a good looking over for cracks.
Posted on Aug 14, 2009
If the engine is not missing now or running rough,The code may be an old one stored in the computer,
The code for Evap usually comes from someone getting gas and not tightening the fuel cap so it clicks at least four times.
Posted on Nov 18, 2009
a timing belt. the water pump uses it to turn it and you got to take it off to change the pump anyway so you might as well get a new one.also the hydralic timing belt tensioner should be replaced at the same time just to be sure.you will need anti freeze of course as well
Posted on Apr 05, 2010
Tips for a great answer:
May 28, 2016 | 1996 Dodge Intrepid
May 18, 2010 | 1996 Dodge Intrepid
Jan 28, 2010 | 1996 Dodge Intrepid
Nov 20, 2009 | 1999 Dodge Intrepid
Oct 23, 2009 | 1996 Dodge Intrepid
Aug 02, 2009 | 1996 Dodge Intrepid
443 people viewed this question
Usually answered in minutes!