2001 Ford F250 Super Duty Super Cab Logo

Related Topics:

Posted on Feb 11, 2012
Be the first to answer

Remove front bumper on2001 F250 pickup

I need to remove the front bumper. can you show mw a breakdown on what needs to be removed

Answer This Question

5 Related Answers

Anonymous

  • 2 Answers
  • Posted on Mar 24, 2009

SOURCE: cant remove fuel filter on 1999 f250 gas motor

You have to use a Fuel line Quick disconnect Tool. Different Brands make this tool and can be found at any number of Auto parts stores.I do believe 3/8 is the correct size for this Fuel filter.

Ad

Anonymous

  • 10865 Answers
  • Posted on Sep 14, 2009

SOURCE: front bumper removal

all you have to do is unbolt it. if the nuts won't budge spray them with wd40 and wait over night for that product to loosen up the rust.

Anonymous

  • 163 Answers
  • Posted on Mar 28, 2010

SOURCE: how to remove front fender on 2002 ford f250 super

take off the fender bolts and the wheel well bolts take out headlight bolts behind the headlight then it should come off

Anonymous

  • 57 Answers
  • Posted on Apr 24, 2010

SOURCE: bent front bumper 1995 ford f 150

Remove the bolts from the brackets. There is probably about 4 of them. Don't drop it on yourself ;)

Testimonial: "this will help me alot, as i bent the bumper down into a frown,,"

Anonymous

  • 312 Answers
  • Posted on May 10, 2010

SOURCE: Front Bumper

Get under the car and look up under and on each side thoroughly and you will see the bolts necessary to tak it off. It is quite simple and need very few tools It is just a vinyl cover.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1989 suburban front bumper
Sara, 1989 GMC Suburban front bumper removal. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Bent Rusted Front Bumper 1989 99 Chevy GMC Pickup...
Grille Replacement 88 98 Chevy trucks
1989 Chevrolet R1500 Suburban Parts NationalGMParts com

Read full answer
Jul 10, 2016 • 1989 GMC Suburban
0helpful
1answer

Need to take driver side rear fender off truck bed its been wrecked and needs replaced please assist thanks
You don't have a rear fender Steve,you have a driver side and passenger side,to remove,on top with hood open,remove 4 bolts,open door and there's 2 more,remove corner light with phillips screwdriver,2 screws there,then at bumper,there's one,have to get under front with a 12 mm nut driver to remove,then at top,they inter lock,lift up to unlock and remove,
Read full answer
Sep 22, 2013 • 1985 Nissan Pickup
0helpful
1answer

Where is the engine block heater plug located on a 250 ford pickup 2001
In the front middle more towrd the left side tucked in behind the bumper!
Read full answer
Jan 12, 2011 • 2001 Ford F250 Super Duty Super Cab
1helpful
2answers

Need to change the passenger side headlight
This video will show you how to change the headlight in your Accord.">
Read full answer
May 19, 2010 • 1996 Honda Accord
0helpful
1answer

How you take off the front bumber
have 96, 95 similar

Section 01-19: Bumpers 1996 Villager Workshop Manual
REMOVAL AND INSTALLATION Bumper and Bumper Cover Front
Removal
  1. Raise and support the vehicle.
  1. Remove the RH and LH front wheel (1007).
  1. Remove the RH and LH front fender splash shield screws. Remove the RH and LH front fender splash shields (16102).




  1. Remove the four front fender brace screws.




  1. Remove the two front fender brace nuts.
  1. Remove the two plastic screws.
  1. Remove the seven clip buttons located under the front bumper cover (17D957).




  1. Remove the RH and LH front turn signal lamps (13369). Refer to Section 17-01 for the removal procedure.
  1. Remove the four front bumper cover brace bolts.




  1. Remove the front bumper cover from the vehicle.




  1. Remove the two front turn signal lamp wire harnesses from the front bumper (17757).



  2. Remove the eight front bumper bolts.




  1. Remove the front bumper from the vehicle.
Read full answer
Mar 02, 2010 • 1995 Mercury Villager
2helpful
1answer

I need info on how to replace the headlamp bulbs on my 2008 Chevy Malibu, can you help.
The procedure is very involved.It requires the removal of the front bumper fascia fasteners from the center and side of the headlamp to be removed.
  1. Remove the front bumper fascia fasteners from the center and side of the headlamp to be removed, full removal of the fascia is not necessary. Refer to Front Bumper Fascia Replacement.
  2. Gently pull the fascia forward to allow clearance to remove the headlamp assembly.
  3. You will also need to remove some of the fasteners at the front of the inner wheel well.
  4. The Front Bumper Fascia is the plastic cover over your front bumper.
  5. You may also have to remove the plastic cover that is located under the front of the hood over the radiator.It extends to both sides.
Read full answer
Oct 27, 2009 • 2008 Chevrolet Malibu
0helpful
1answer

What do I have to do to remove the front bumper on a 2005 GMC Canyon 4wd pickup?
first remove plastic around and under bumper then acess bomper bolts from under truck make sure any lights are disconeccted before dropping bumper

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5

Read full answer
Oct 06, 2009 • 2005 GMC Canyon
0helpful
1answer

Need to remove the front bumper of a 1996 Nissan Pickup
remove bolt attach to front re-bar and bumper should come loose
Read full answer
Jul 01, 2009 • 1996 Nissan Pickup
1helpful
1answer

Replace the face skid in the front bumper
remove front bumper and it should be clear what holding the face skid in place
Read full answer
Sep 29, 2008 • 2008 Honda Pilot
2helpful
2answers

Remove front bumper honda accord
you will need to remove the 2 front signal lights by loosening the single captive screw on each of them. under the signal lights , you will see 2 14" bolts holding each side of the bumper. make sure you loosen the screws that hold the bumber to the fenders.
Read full answer
Jul 15, 2008 • 1998 Honda Accord
Not finding what you are looking for?

View Most Popular

2001 F250 Super Duty Super Cab

  • Cars & Trucks

Related Question

1989 suburban front bumper

  • 1989 GMC Suburban

553 views

Ask a Question

Usually answered in minutes!

Popular Questions

Fuse box diagram

2002 Ford F250 Super Duty SuperCab

I need a fuse panel

Ford F-250 Cars & Trucks

Fuel relay on a 2002 f250 super duty, no manual

2002 Ford F250 Super Duty SuperCab

F-250 extended cab rear door will not open.

2000 Ford F250 Super Duty Crew Cabs

Where is the turn signal flasher relay located on

2001 Ford F250 Super Duty Super Cab

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...