Question about Cars & Trucks

1 Answer

Ford connect front bumper removal - Cars & Trucks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 22,156 Answers

Never done one but if its like most cars then its some screws around the the wheel arch ,along the bottom by the belly guard and then look for some bolts onto the the two chassis members either side i would guess ,now if i had my head under it i would soon see them so have a good look and follow your nose and i dont think you will go far wrong

Posted on Feb 11, 2012

Testimonial: "Cheers colin good man"

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 840 Answers

SOURCE: Trouble removing 1999 Solara Grille

sorry to tell you that but you must take the bumper off and its pretty easy there are retainers up top remove them remove the bottom of the bumper ones and they may have bolts now for the last part its 100 mm at the fender edge and bumper just slide off and then you can take and change the grille

Posted on Jan 27, 2009

moparownr
  • 667 Answers

SOURCE: how to replace the front bumper and grill on a 97 ford explorer

you need a repair manual, Haynes or Chilton, there are too many places to explain here in this format, if you can not find these book at your local parts store, then try your local library, then sometimes even have the dealer shop manuals for your use, hope this helps

Posted on May 20, 2009

  • 10865 Answers

SOURCE: front bumper removal

all you have to do is unbolt it. if the nuts won't budge spray them with wd40 and wait over night for that product to loosen up the rust.

Posted on Sep 14, 2009

  • 2 Answers

SOURCE: removal of front bumper

The bumper is secured using four 13mm nuts.

a) Open the bonnet and look for one 13mm nut on the lower inside of each headlight.
b) Remove the towing eye covers on the lower section of the bumper and you will find one 13mm nut in each.

Hope this helps.
Shane

Posted on Apr 09, 2010

  • 57 Answers

SOURCE: bent front bumper 1995 ford f 150

Remove the bolts from the brackets. There is probably about 4 of them. Don't drop it on yourself ;)

Posted on Apr 24, 2010

Testimonial: "this will help me alot, as i bent the bumper down into a frown,,"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fill r22 ac on 2004 Ford focus


To top up AC then the low pressure connection is under the front wing right side at the front directly behind the bumper ,remove the plastic inner wing at the front to gain access

Jul 31, 2015 | Ford Cars & Trucks

Tip

How to remove a bumper off a ford puma


How to Remove a front bumper off a ford puma

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

on Jan 31, 2010 | Ford Focus Cars & Trucks

1 Answer

Reolace front bumper 2001 ford focus ghia


raise and support front of vehicle, remove radiator grill, remove the headlamps, disconnect the wiring from the indicators and fog lamps.
undo the screws holding wheel arch liner to front wings (1 each side) and the screws (3 each side) securing the bumper to the wings.Release the 6 securing clips from the top of the bumper cover and the 3 from the bottom. with someone helping, pull out the sides of the bumper and slide forward. Fitting is in reverse order

Mar 14, 2015 | 2001 Ford Focus

2 Answers

2008 ford escape. removal of rear bumper cover


Pop the Hatchback open and remove the connectors
from the top of the bumper cover.

Optional Step: Using a Floor Jack, raise both sides
of the car in the back, supporting both sides with
jack stands, and remove the rear wheels.

Using Torx Bits, remove the inner rear wheel well
lining.

Get behind the rear wheel well and loosen the bolts
holding the bumper brackets on. They're pretty
difficult to find and remove. Be Patient. Do the
same to the other side.

Remove the rear bumper cover by pulling the cover
outward from the part nearest the wheel on both
sides. Once removed, take off the 2 black mounting
brackets from the bumper cover.

Good Luck

Feb 27, 2015 | 2008 Ford Escape

1 Answer

Where can I find instructions on removing a front bumper on a 2001 ford focus


There are 4 bolts (upper) that fixes the bumper, under the bumper, there are bumper sliders as well as the sides. Remove the 4 bolts, fender linings and slide off bumper clips from the sliders

Jan 27, 2015 | 2001 Ford Focus

1 Answer

Removal of front bumper 1992 ford taurus


Simple and easy,
Buy the bumper cover new or cheep at junk yard your choice.
How to remove the broken/old bumper by first removing both head lights.
Then remove all plastic clips, yes you can just brake them off there cheep to buy at any auto store.
Then remove all main bolts from the top and underneath.
Then put new bumper on and reverse the steps.

Jul 08, 2012 | 1992 Ford Taurus

1 Answer

How to remove headlamp assembly 2006 Ford Five Hundred


bulb replacement?

You may be able to clear bumper cover by pusihing down while pulling out lamp.

Please rate.
---------------------------

SECTION 417-01: Exterior Lighting 2005 Freestyle/Five Hundred/Montego Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 03/14/2005
Headlamp Assembly - Five Hundred, Montego adobe.gif Printable View (211 KB) n0050703.jpg
Item Part Number Description 1 W702706 Top headlamp assembly bolts (2 required) 2 W704551 Side headlamp assembly bolt 3 W702706 Front headlamp assembly bolt 4 13005/13006 Headlamp assembly (RH/LH)
Removal
  1. Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. Remove the 4 bolts and the headlamp assembly.
    • Disconnect the electrical connectors.
Installation
  1. Connect the electrical connectors and position the headlamp assembly in place.
  1. Install the side headlamp assembly bolt.
    • Tighten to 11 Nm (8 lb-ft).
  1. Install the front headlamp assembly bolt.
  1. Install the top outboard headlamp assembly bolt.
  1. Install the top inboard headlamp assembly bolt.
  1. Install the front bumper cover. For additional information, refer to Section 501-19.

Aug 03, 2011 | Ford Five Hundred Cars & Trucks

2 Answers

Bent front bumper 1995 ford f 150


Remove the bolts from the brackets. There is probably about 4 of them. Don't drop it on yourself ;)

Apr 24, 2010 | 1991 Ford Bronco

1 Answer

How do you take bumper off a ford puma?


Front Bumper (434230)

Removal
1. Remove the radiator grille.
2. Remove the left-hand front wheel.
3. Detach the fender splash shield from the bumper cover and fender (both sides).
4. Remove the air cleaner intake pipe retaining clip.
5. Detach the air cleaner intake pipe from the air cleaner housing.

1 Rotate the pipe clockwise.

2 Detach the pipe.
6. Detach the bumper cover from the fender and support bracket (both sides).
7. Remove the left-hand side bumper retaining nut.
8. Remove the right-hand side bumper retaining nut.
9. Remove the bumper.

Installation
1. To install, reverse the removal procedure.

Jan 01, 2010 | 2007 Ford F

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...