Require radio code for 22DC279/62.Rn279FY0052468

If you require a radio code contact this link and for a small fee they will send your code:

Was the battery power lost to the radio?

To reset the radio just disconnect the battery for a few minutes, if you require a security code contact this link: Car radio code in Uxbridge London Gumtree

Remove the radio. 10 to 1 the code is on the radio casing.

Newer cars have radios with security codes. If they lose power (such as if a thief steals it), they lock and require a code to be inserted to reset it. The car dealer provides the code at purchase for the radio it is usually on a card or paper included with the owner manual and other papers. If it is not there, you will most likely need to contact a dealer to find out what information you need to supply them to get an unlock code. Sometimes it is the VIN; other times it is the radio serial number. That may require removal of the unit to obtain.

reset the anti theft code for the radio

Every radio has a different code. You will have to contact a Mercedes-Benz dealer to get the code for your particular radio. It MAY require removal of the radio to get the serial number.

On all Saabs from 1998 the audio systems are digitaly coded to the car, as long as the radio is from the original car, then no code is required.
If it is a replacment radio from another car, you will require Saab diagnostic tool Tech2 to programme radio.

These older Alpine radios require specialist advice

Ask here for free advice

www.ukbookshelf.co.uk

You must contact the parts department of your local Acura dealer to get this code. You will need to show them your car's registration to prove that you are the owner. You may be able to get the code with only the registration and the VIN code (found on the registration). Some manufacturers require the serial number on the radio, which would require that the radio be removed from the car to see the serial number.
Charlie