Question about 2003 Chevrolet Tracker

Open Question

How do I remove fan shroud on a 03 chevy tracker

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 71 Answers

SOURCE: to install a cooling fan motor on a 01 chevy

No just a basic tool kit will get the job done.

Posted on Jul 16, 2009

Ad
cooper0365
  • 347 Answers

SOURCE: how do you change electric radiator fan motor?

it only ha 4 bolts holding all on some just have two but no u cant do it with out taking it out its simple

Posted on Oct 03, 2009

  • 247 Answers

SOURCE: '03 chevy tracker. no heat. scent of antifreeze

You need to have the cooling system/heater core tested for leaking. Those symptoms sound like the heater core has failed.

Posted on Jan 07, 2010

  • 102 Answers

SOURCE: 2002 chevy blazer. Trying to swap out the water

The new chevys are a pain. There should be alot of little nuts on the top of the shroud possibly under a small piece of weather stripping. There should also be 2 or 4 small bolts halfway down the shroud on both sides. Then there are 2 or 4 bolts on the bottom of the shroud. It should end up in two pieces with one piece coming out the top and one out the bottom. Removing the shroud most of the time is not necessary but it helps.

Posted on Feb 03, 2010

gh20s
  • 343 Answers

SOURCE: how do I remove the cooling fan shroud from the

I would suggest replacing the cooling fan relay in the fuse compartment under the hood first. Cooling fan motors very, very rarely go bad. You will probably end up having to remove the radiator to remove the shroud. You will save yourself a lot of time and money if you replace the relay first.

Posted on Jul 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace the fan belt 2003 chevy tracker 2.0


Jerald, You will have to remove the the accessory belt first I believe by putting appropriate wrench on tensioner and pulling tensioner toward passenger side to allow removal of the belt. Then you will loosen alternator to let tension off fan belt and replace the fan belt. Reverse procedure to install. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
2002 Chevy Tracker 2 0L 2 5L Serpentine Belt Diagram serpentinebelthq com
https://answers.yahoo.com/question/index?qid=20060822210207AA9Tfgo
chevy how belt tensioner works Google Search

Jun 15, 2016 | Cars & Trucks

1 Answer

How do I remove a radiator in a 2000 Chevy Silverado 1500 pickup


Gasoline Engines
  1. Drain the cooling system.
  2. Unfasten the upper fan shroud bolts and remove the upper fan shroud.
  3. If equipped, remove the upper panel fasteners and the panel.
  4. If equipped, remove the upper insulators and brackets.
  5. Disconnect the radiator upper and lower hoses and, if applicable, the transmission coolant lines.
  6. Remove the coolant recovery system line, if so equipped.
  7. Remove the oil coolant lines, if equipped.
  8. Remove the lower fan shroud bolts and the lower fan shroud.
  9. Remove radiator from the lower brackets and insulators.

Jul 28, 2014 | 2000 Chevrolet Silverado 1500

1 Answer

I have 1993 Chevy van (G20) that has a leak. In efforts to locate the leak in need to simply remove my fan shroud, but it looks as if I need to remove my grille to do that. Is there an easier way to remove...


You have a clutch fan on the water pump. big nut that is about 1&1/4 ". You will have to get a wrech that fits it and hit the wrench with a hammer counter clock wise to remove it. some times these don't come off to easy. keep hitting. Once it is loose it will spin off. you will have to take it out at the same time as the shroud. four bolts hold the shroud on.
Randy

Nov 10, 2010 | 1993 Chevrolet G20

1 Answer

How do i replace a water pump on a 1993 geo


1 disconnect battery ground cable
2 drain cooling system
3 on models with a/c, proceed as follows:

a discharge a/c system
b loosen upper and lower compressor bolts and remove compressor drive belt
c remove a/c line from top of radiator shroud

4 remove water pump drive belt
5 remove reservoir tank from radiator bracket
6 remove radiator shroud and fan/clutch from vehicle
7 remove waterpump pulley from waterpump
8 remove timing tensioner and timing belt
9 remove dipstick tube
10 remove alternator mounting bracket at water pump
11 remove water pump mounting bolts and water pump
12 reverse procedure to install, using new gasket and rubber seal

Feb 18, 2010 | 1993 Geo Tracker

1 Answer

2002 chevy blazer. Trying to swap out the water


The new chevys are a pain. There should be alot of little nuts on the top of the shroud possibly under a small piece of weather stripping. There should also be 2 or 4 small bolts halfway down the shroud on both sides. Then there are 2 or 4 bolts on the bottom of the shroud. It should end up in two pieces with one piece coming out the top and one out the bottom. Removing the shroud most of the time is not necessary but it helps.

Feb 03, 2010 | 2002 Chevrolet TrailBlazer

1 Answer

'03 chevy tracker. no heat. scent of antifreeze


You need to have the cooling system/heater core tested for leaking. Those symptoms sound like the heater core has failed.

Jan 07, 2010 | 2003 Chevrolet Tracker

1 Answer

I am trying to find out how to disassemble the radiator support in my 1999 Chevy Suburban and I am having some difficulities.


  1. Drain the cooling system.
  2. Unfasten the upper fan shroud bolts and remove the upper fan shroud.
  3. If equipped, remove the upper panel fasteners and the panel.
  4. If equipped, remove the upper insulators and brackets.
  5. Disconnect the radiator upper and lower hoses and, if applicable, the transmission coolant lines.
  6. Remove the coolant recovery system line, if so equipped.
  7. Remove the oil coolant lines, if equipped.
  8. Remove the lower fan shroud bolts and the lower fan shroud.
  9. Remove radiator from the lower brackets and insulators.

    0900c152802490af.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Exploded view of the radiator mounting


    0900c152802490b0.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Remove the radiator upper panel fasteners


    0900c152802490b1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Remove the radiator upper panel


    0900c152802490b2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Disconnect the transmission cooler lines

Sep 02, 2009 | Chevrolet Suburban 1500 Cars & Trucks

3 Answers

I have a 97 Lincoln Continental. I am trying to replace the cooling fan. I have the shroud loose but can't figure out how to get out. Any help would helpful. Thanks


YOU NEED TO TAKE IT OUT FROM THE BOTTOM REMOVE PLASTIC SHROUD THEN DRIAN AND PULL LOWER RADIATOR HOSE FROM RADIATOR AND THE REST IS PRETTY SELF EXPLANATORY MAKE SURE YOU BUY THE CLIPS FOR THE WIRRING BEFORE YOU EVEN START

May 09, 2009 | 1997 Lincoln Continental

1 Answer

Replace the radiator


Removal and Installation
On all engines
  1. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling And Bleeding in this section.
  1. Remove the upper radiator sight shield.
  1. Remove the air cleaner outlet tube. For additional information, refer to Section 303-12 .
  1. Remove the six bolts and the two radiator upper support brackets.
  1. NOTE: 3.9L shown; 3.0L similar.
    Remove the upper radiator hose.
  1. Remove the bolt and position the receiver drier aside.
  1. Disconnect the dual flow coolant valve electrical connector and the A/C line from the fan shroud.
On 3.0L engines
  1. Disconnect the throttle position (TP) sensor and the idle air control (IAC) valve electrical connectors.
  1. Remove the bracket.
    1. Remove the bolts.
    1. Remove the bracket.
    1. Disconnect the high pressure cooling fan bracket and line.
    1. Using the appropriate special tool, install a new O-ring on the power steering pressure hose fitting.
    1. Separate the return hose from the fan shroud and position aside.
    1. Remove the two bolts and position the fan shroud assembly.
    1. Disconnect the return hose from the cooling fan and shroud and remove the cooling fan and shroud assembly.
    1. Remove the A/C condenser. For additional information, refer to Section 412-03 .
    1. Disconnect the lower radiator hose.
    1. Remove the two bolts and position the multi-cooler assembly aside.
    1. Remove the bolts and the condenser support brackets.
    1. Remove the radiator.

Apr 29, 2009 | 2002 Lincoln LS

Not finding what you are looking for?
2003 Chevrolet Tracker Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...