Question about 2000 Hyundai Accent
Timing marks diagram for 1.5 Hyundai engine
Let's see if this helps:
Posted on Feb 11, 2012
Testimonial: "Yes this is exactly what I was looking for ! Thank you "
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Hopefully this picture comes through, if not let me know and I can zoom in. Be sure to remove the auto tensioner, compress it slowly in a vice and put a pin through holding holes until the belt is mounted properly, replace it and pull the pin.
Posted on Mar 26, 2009
Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.
Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.
Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Mar 25, 2010
Ensure timing marks aligned  &  . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt  . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt  . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned  . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt  . Tightening torque: 170-180 Nm
7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top
Posted on Mar 21, 2010
Tips for a great answer:
Sep 14, 2011 | Hyundai Accent Cars & Trucks
Jun 07, 2010 | 1999 Hyundai Accent
Apr 25, 2010 | Hyundai Motor 1995 Accent
Apr 16, 2010 | Hyundai Motor 2004 Sonata
Apr 13, 2010 | 2001 Hyundai Tiburon
Mar 29, 2010 | Hyundai Motor 1995 Accent
Mar 03, 2010 | 1998 Hyundai Elantra
Sep 02, 2009 | Hyundai Motor 1998 Sonata
Jun 23, 2008 | Hyundai Motor 2002 Sonata
2,742 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: