Question about Hyundai Accent
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You have to take out the ash tray, and remove those two screws, then pop out the center dash trim. Careful, though, you have to take out a lot of the wiring inside of your center dash trim in order to pull it out for enough room to move the radio in and out. I'm doing this right now, actually..
Posted on May 22, 2009
Ensure timing marks aligned  &  . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt  . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt  . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned  . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt  . Tightening torque: 170-180 Nm
7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top
Posted on Mar 21, 2010
Tips for a great answer:
Mar 06, 2014 | Hyundai Cars & Trucks
Mar 10, 2013 | Cars & Trucks
Sep 02, 2011 | 2002 Hyundai Santa Fe
Oct 16, 2010 | 2001 Hyundai Elantra
May 23, 2010 | 2002 Hyundai Accent
Sep 30, 2009 | Hyundai Motor 2003 Sonata
Jun 05, 2009 | 2002 Hyundai Santa Fe
Sep 07, 2008 | Hyundai Motor 1995 Accent
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: