Question about 2007 Dodge Magnum SRT8 Wagon

Open Question

07 dodge magnum code p1005 - 2007 Dodge Magnum SRT8 Wagon

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrgreenz
  • 962 Answers

SOURCE: trying to find the iaf

It is a small two wire sensor plug located on the intake pipe near the MAF adapter plug. The intake Pipe is the biggest pipe you will see under the hood of your car.It goes from the front of the engine to the Fuel Injector assembly.you should find the IAF sensor at the front where it goes into the lower intake. That is if it has a seperate IAF and not built in.

Posted on Jan 09, 2009

  • 14 Answers

SOURCE: 07 dodge magnum stuck in

Releve any load on the drive train.
Does it have an electric lock. ie foot on brake, key on then will come out of park?

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 dodge magnum ESP/ BAS is on


Re-calibrate the system. Turn the engine on, center the steering wheel. Then turn the wheel all the way to the left until it stops, then to the right until it stops, then center it and shut the engine off.

May 23, 2015 | Dodge Magnum Cars & Trucks

1 Answer

Were is the starter relay fuse on 07 dodge caliber


A lot of vehicles have a fuse-link in the cable at +cable end. Best to remove cable, check with ohm meter.

May 19, 2014 | 2007 Dodge Magnum SRT8 Wagon

1 Answer

I have a 2007 dogde charger and my check engine light is on. I get codes P1005, P0158, P0157 and P0128. I am not sure what these mean or what to do about them can anyone help?


P1005 is model specific, Dodge is a problem with the manifold tuning valve.
Code 158 and 157 are for a problem with the O2 sensor for bank two after the catalytic converter.
Code 128 is for a problem with the thermostat or the engine is not reaching normal temp.
The O2 sensor codes could be caused from the manifold valve or they could be caused by a faulty O2 sensor.
I would start with the coolant temp problem and work back.

Mar 01, 2013 | 2007 Dodge Charger SE

1 Answer

Where is the evap purge solenoid located on a 07 dodge magnum


my purge valve solenoid on my 2007 dodge magnum is under the hood on the back left hand side...gonna replace it when the part comes in tomorrow because after all my research that should resolve the issue.

Sep 15, 2012 | 2006 Dodge Charger

2 Answers

Were is starter relay fuse on 07 dodge magnum


It is a 20 amp (blue) fuse it is in fuse position #20 in the under hood power distrubutuion box just aft of the washer bottle fill cap tower.

Jun 06, 2012 | 2007 Dodge Magnum SRT8 Wagon

1 Answer

07 dodge magnum stuck in park


Releve any load on the drive train.
Does it have an electric lock. ie foot on brake, key on then will come out of park?

Aug 11, 2011 | Dodge Magnum Cars & Trucks

1 Answer

CHECKING TRANSMISSION FLUID


I believe these have one of the new "sealed transmissions" You don't check the transmission fluid.

They are a "lifetme transmission" when it's life is up and it breaks you pull it for a new one (or dump the car) Dodge is using allot of these

Feb 05, 2009 | 2007 Dodge Magnum SRT8 Wagon

1 Answer

Trying to find the iaf sensor on dodge magnum sxt 07


It is a small two wire sensor plug located on the intake pipe near the MAF adapter plug. The intake Pipe is the biggest pipe you will see under the hood of your car.It goes from the front of the engine to the Fuel Injector assembly.you should find the IAF sensor at the front where it goes into the lower intake. That is if it has a seperate IAF and not built in.

Jan 02, 2009 | 2006 Dodge Magnum

1 Answer

Im installing a performance module on my 07 magnum sxt


You are wasteing your time and money on this car. Sorry to tell you

Jan 02, 2009 | 2006 Dodge Magnum

Not finding what you are looking for?
2007 Dodge Magnum SRT8 Wagon Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...