Question about 2006 Ford F-250 Super Duty

Open Question

I have a 2007 ford f350 with a 6.0 that will not start the tbc default is showing up and i am told the ficm needs repaced is this a related issue ?

I know what the tbc fault means but why did it come on when the ficm went out on my 2007 ford with a6.0 and are these 2 related somehow ??????????????????

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 64 Answers

SOURCE: tbc fault trailer disconnected message 05 f350

check the rear plug on the bumper they are prone to water damage and corrosion, if you unplug the 7-way and four way plug from the body connector and test drive the vehicle this will tell you if the plug is the source of the problem.

Posted on Jul 22, 2009

  • 75 Answers

SOURCE: what is a tbc fault on a 2006 ford f350 6.0

That is your trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code.

Posted on Feb 03, 2010

traceylewis1
  • 363 Answers

SOURCE: If my f350 reads TBC

not sure if you need to change it but 05 and 06 f350 are haveing a lot of issues with this you might want to see if they have a recall....Sorry I cant help futher

Posted on Dec 04, 2010

  • 5370 Answers

SOURCE: what does tbc fault mean on a 2006 f350

TBC means Trailer Brake Controller fault.Check for moisture/water in the trailer plug connector at the back of your truck. Water/moisture will cause TBC error codes. Look for moisture at all connections to the plug and inside the plug.Trailer brake controller that is built into your dash. If you are hooked up to a trailer it could mean you are losing your connection or ground to the trailer. If you are not connected to a trailer it means there is a problem with your brake controller possibly a short in the wiring caising the fault code. ----- It means either A) you have a bad ground on your trailer. Or B) your cable on your trailer is too short and causing it to pull out of the plug or C) you have a short in the factory trailer harness wiring or the plug is gunked up. --------- get this possibilities checked.It will help.Thanks.Helpmech.

Posted on Dec 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does po-405 code mean on my 2007 f-250 6.0 diesal


DTC P0405 Exhaust Gas Recirculation (EGR) Position Sensor Circuit Low Voltage. Need to replace.

Nov 26, 2013 | Ford F-250 Cars & Trucks

1 Answer

I have 2008 f250 s.d. It did not come with the factory installed trailer brake controller. It does have the tow package.I was told I need a new brake master cylinder in order to add a factory controller....


I have the same problem and they want to charge me 600 dollars for the master cylinder I told the I'm just going to return the tbc get my money back and by the aftermarket I don't want to spend $1000 for a tbc

Apr 24, 2011 | 2008 Ford F 250 Super Duty 4WD

1 Answer

Hi there own a ford f350 2004 6.0 power stroke it's starting smoking heavily White and smells as if it's unspent diesel it I have replaced EGR cooler and valve as thy were deleted runs lumpy but still got...


This could be the FICM or the injectors. If you have a code reader, it can help determine if its the FICM. You can also check out this thread http://www.ford-trucks.com/forums/899444-ficm-testing-procedure.html
You are probably already aware of all the 6.0 problems. It does sound like a fuel issue. The injectors are unfortunately a problem and very sensitive(don't ever run out of gas). If one injector is bad or going bad, truck will run rough at idle but once rpms get up, the truck will seem to run better. When 2 or more injectors go bad, truck will barely run. In either case, power will be very low at lower rpms.
thanks let me know if this helps

Apr 10, 2011 | 2004 Ford F350

1 Answer

Wont start, cranks over, shows tbc fault,


the tbc fault has nothing to do with it... it stands for trailer brake controller fault. as for the no start... could be many things

Jan 22, 2011 | 2005 Ford F 350 Super Duty

1 Answer

Truck displaying "TBC FAULT" while driving. What


It may possibly store DTCs. If not.. PINPOINT TEST H: THE INSTRUMENT CLUSTER DISPLAYS "TBC FAULT"

Test Step Result / Action to Take
H1 CHECK FOR THE PRESENCE OF A TRAILER BRAKE CONTROL (TBC) MODULE AND BRAKE PRESSURE TRANSDUCER
Verify that the vehicle is equipped with a TBC module in the instrument panel and a brake pressure transducer on the master cylinder.
Is the vehicle equipped with a TBC module and a brake pressure transducer?
Yes
GO to H2.

No
If the vehicle has a brake pressure transducer but not a TBC module, INSTALL a TBC module. CLEAR the DTCs. REPEAT the self-test.

- If the vehicle has a TBC module but does not have a brake pressure transducer, GO to H4 .

- If the vehicle has neither a TBC module nor a brake pressure transducer, GO to H3 .

H2 CHECK TBC MODULE COMMUNICATIONS
Using the scan tool, access the TBC module. Does the scan tool communicate with the TBC module?
Yes
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

No
Go To Pinpoint Test a.

H3 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.

Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a trailer brake retrofit kit. CLEAR the DTCs. REPEAT the self-test.

No
VERIFY that the instrument cluster is configured correctly, RECONFIGURE as necessary. REFER to Programmable Parameters in this section.

H4 CHECK THE VEHICLE BUILD INFORMATION
Verify that the vehicle is supposed to be equipped with a TBC module.
Is the vehicle supposed to be equipped with a TBC module?
Yes
INSTALL a brake pressure transducer. Make sure to LUBRICATE the O-ring seal with clean, specified brake fluid before installation. RECONFIGURE the instrument cluster for trailer brakes, REFER to Programmable Parameters in this section. CLEAR the DTCs. REPEAT the self-test.

No
REMOVE the TBC module and install the storage bin.

Hope this helps; keep us updated.

Jan 17, 2011 | 2007 Ford Super Duty King Ranch

1 Answer

TBC Fault what is this? My truck wont start and this is showing up on the digital monitor


tbc stands for trailor brake controller, that should not cause vehicle not to start more than likely you have 2 seperate concerns. if this is a diesel i would check the high pressure system for leaks.

Aug 12, 2010 | 2005 Ford F 350 Super Duty

Not finding what you are looking for?
2006 Ford F-250 Super Duty Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...