Question about 1995 Jeep Cherokee

1 Answer

Blinker dont work flasher and other lights work

Blinker dont work allother lights work

Posted by on

  • Anonymous Mar 15, 2014

    flashers wont work

  • Anonymous Mar 23, 2014

    All lights working except left blinkers

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Jeep Master
  • 1,779 Answers

The turn signals don't work, but the emergency flashers do? If that's the case, replace the flasher, you have 2 flashers, one for emergency (hazard) flasher, and one for the turn signals. It should be on the fuse block under the dash.

Posted on Oct 23, 2008

2 Suggested Answers

  • 7 Answers

SOURCE: blinkers dont work, all fuses ok, all bulbs ok, break lights work

Under the dash near drivers side or under more toward the middle of the dash
Usually the sign of a bad flasher is erratic flashing pattern.
Does yours do this ?
Just to be aware of the simple fixes....make sure the bulb is not burnt out before you
go any further. Some of these bulbs are double element bulbs.. In other words
it may light up for one function giving the impression of it being good, but it may
not light up for the next application. For example....tail lights will light when the
headlights are on but do not glow brighter when the brake is applied...dual element bulb.
Hope this helps lead you in the right direction !

Posted on Jul 21, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blinkers


Turn signal lights and hazard lights it is the same flasher; the Flasher is located front seating area, driver side, behind dash, mounted on steering column. Do you have power on the white/red wire at the switch?

I would start with testing the multitunction switch that is more than likely faulty.

Hope this helps.

Feb 26, 2012 | 1998 Ford Explorer

1 Answer

My blinkers are not working.I replaced fuses and flasher.My hazard lights work but my blinkers still dont.What else could I check.


are you sure you replaced the signal flasher and not the hazard flasher as they look the same.put the hazards on and check to see if it was the one you replaced.if it is then you need to located the signal flasher and replace it.if you still have the old one you replaced you can use it.

May 01, 2011 | 1997 Ford Thunderbird LX

1 Answer

2000 Jeep Grand Cherokee, I had blinkers and flashers no brake lights, and after checking the bulbs in the light itself I dont have blinkers or flashers at all


Just no turn signals in the back now? Maybe didn't install the bulbs tight back into the asm? No brake lights...do the lights work with headlights on and just no illumination with the brake pedal depressed? Could be brake light switch.

Oct 01, 2010 | 2000 Jeep Grand Cherokee

1 Answer

1989 chevy 1/2 ton.brake lights or emergency flashers dont work.tail lights an blinkers work.


The Blinkers and the Brake Lights are the same bulb. So check the brake light switch. Flashers use a different flasher unit, than the turn signals

Dec 16, 2009 | 1989 Chevrolet K1500

1 Answer

TURN SIGNAL, BRAKE & HAZARD LIGHTS


No Turn Signal Operation (blinker)The turn signal lights in your car are a basic electrical system that controls the front and rear blinker lights to alert the intended direction of the vehicle. We have listed some of the most common problems and repair troubleshooting tips below:
Troubleshooting Procedure
To start troubleshooting this problem:
  • Turn the key to the on position (do not start engine)
  • Inspect the system fuse located in the fuse panel and replace if needed. If you cannot find the location of the blinker fuse consult your owner's manual or an online repair manual
  • When a blinker flasher fails it can cause blinker lights to say on, not blink, or not go on at all. To test the blinker system flasher, remove the flasher unit and insert a jumper wire between the two terminals. If blinker stays on in both directions without blinking, replace the flasher. If you cannot find the location of the blinker flasher consult your owners manual or an online repair manual.
  • 1b7f814.jpg

Jul 09, 2009 | 1999 GMC Denali

1 Answer

1992 Dodge dakota


you have a bulb out or your relay is shot

Oct 07, 2008 | 1992 Dodge Dakota

Not finding what you are looking for?
1995 Jeep Cherokee Logo

Related Topics:

638 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...