Question about Cars & Trucks
Abs light comes on while driving. what can be the problem?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem, turns out tere was a fuse in the fuse panel beside the brake pedal that was blown out, however the fuse wasn't for the lighter it was for the headlights or something but the headlights we're still working.... CHECK ALL of the fuses, not just the lighter
Posted on Dec 27, 2008
SOURCE: ACURA 2204 TL
I UPGRADE IT MY TL NON TYPE S ...TO THE O.E BREMBO KIT....TOGETHER WITH THE ROTORS AND BRAND NEW ABS SENSORS.......WHY IS THE ABS ,VSA, ABD BRAKE LIGHT ON??MY ACURA IS
Posted on Mar 12, 2009
The SRS computer needs to be reset, if you dont have a repair manual i would first suggest finding one for each car. The basic principal is that you jumper the diagnostic plug (under the glove box in the RL). The next step I believe is that you must depress the TCS button, then while holding it down you turn the key to on, continue to hold the TCS button for 15 sec and then let off. The check engine light should then blink really quick a few times and that means its reset. Im reciting this from memory so dont quote me on it. I have done it before for the RL but not the integra, id really suggest finding a repair manual though.
Posted on Sep 19, 2009
This is a fairly common problem, Gm has actually issued a service bulletin regarding this repair. The problem probably originates from one of your wheel speed sensors that is mounted inside one of your front wheel bearings. To be sure, you need to have the car scanned to find out which one and then you have to replace the whole bearing assembly because the sensor is integral to the bearing. The bearing is not hard to do but you will need some professional tools if you want to do it yourself. At a shop it should cost between 3 and 400 dollars complete.
Posted on Jan 10, 2010
the best and safest way to remove this radio is with the special tools that Acura made specifically for removing the radio. Any radio store or best buy can easily remove it for you. I hope this helps please rate this and thank you.
Posted on Mar 05, 2010
Tips for a great answer:
May 26, 2017 | Acura Cars & Trucks
Feb 13, 2014 | 1997 Acura RL
Jan 17, 2012 | 1997 Acura RL
Nov 23, 2010 | 1997 Acura RL
Jan 30, 2010 | 1997 Acura RL
Jul 17, 2009 | 1997 Acura RL
Jan 16, 2009 | 1997 Acura CL
Jan 04, 2009 | 2000 Acura 3.5RL
204 people viewed this question
Usually answered in minutes!