Question about 2000 Dodge Intrepid

2 Answers

THE CAR "JUMPS" WHEN DRIVING.

THE CAR WILL "JUMP" WHILE WE ARE DRIVING SOMEWHERE. KIND OF TWO STEPS FORWARD AND THREE STEPS BACK DEAL......

WAS TOLD IT IS THE CRANKSHAFT SENSOR. I HAVE BEEN TOLD IT IS LOCATED IN THREE DIFFERENT PLACES, AND CANNOT FIND IT YET.

ANYONE KNOW WHERE EXACTLY IT IS?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When I back up every now and then my 220 Malibu jumps. Can someone tell me what that might be.
Thanks

Posted on Jul 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a 99 intrepid that did the same thing. My car would do it at the initial start up and also at a complete stop at a stop sign or stop light. The symptoms of my car were several. It kept blowing a 10 maybe 20 amp fuse that opened a door that allowed heat into my car. This same fuse controlled the back up lights as well as the A/C indicator light on the dash. The A/C would work but the light on the dash would not come on. The tachometer needle would also jump with the car's jumping. After several months of trying to figure out what was wrong with it, and no heat, I finally took it to the dealer and explained all of the symptoms I was having. They traced it down to an electrical short under the car by the transmission. It fixed the problem. Hopes this helps.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change a crankshaft sensor behind the timing belt of a 2003 kia sedona


Go to Google type in kind of car motor and what you want to see etc,then watch the video.

Sep 14, 2016 | 2003 Kia Sedona

1 Answer

Multitronic gearbox


dont ask a dealer-bettr advice from privatemechs--ur car needs a datastream run-to show values whats goin on in the system--specific gear is used not a cheap code reader--the computer may hav issues-unplug it and clean the connectors-then see if it clears anything--ur library has vehicle repair books

Feb 10, 2014 | Cars & Trucks

1 Answer

All lights work I neede to jump start the car, but I hear a hissing sound where I turn the key, and before I spend the money for battery, what do u think?


if your battery is in the boot get a portable jump starter and connect it to your current battery ive got a 1995 xjr and i did this because this was cheaper and fixing jags tend to be very expensive so if your battery isin the back of your car do so but if your batterys in the front of the car and you really dont want to spend money on a new battery then get a portable jump starter and then every time you go somewhere you would have to connect the portable jump starter up to your current battery and start it that way

Jul 21, 2013 | 2000 Jaguar S-Type

1 Answer

Jumps forward when brakes are applied at intersections when stopping. Doesn't happen all the time.


SOUNDS LIKE YOUR BRAKE PADS ARE DOWN TO THE METAL CANGE THEM IMMEDIATELY WHEN VEHICLE STANDS ALL DAY THE PAD METAL BACKING RUSTS THAT MAKES THEM HOWL

Oct 19, 2012 | Pontiac Grand Am Cars & Trucks

1 Answer

My 99 montero kind of pulls back when I let off the gas. The code says p0505 I changed the iac, tps, coilpacks wires plugs. Air filter . And like I said we I'm pressing the gas a let off on it , it...


If this code set there is only three possible reason, The IAC motot itself is faulty,a open or short in the wiring bad intermittent connection,Or PCM. My opinion for this your not describing a IAC problem.Just beacause the code comes up just points you in that direction,The ECM reads rationality,and logic,open shorts and ground, You got a false air somewhere.Go to the MAF,Is the duct torn or loose? How about the EGR? It can be getting stuck open and not closing properly. Your vehicle is equipt with a MDP sensor (manifold differential pressure sensor).Located on top of the intake manifold plenum. This monitor the EGR operation. The MDP has a tendency to plug.Inspect and see if its plugged from the vacuum orfice.

Mar 09, 2012 | 1999 Mitsubishi Montero Sport

1 Answer

My car just lost all power while driving


timing belt snapped by the sound of it

Dec 16, 2011 | 2001 Suzuki Swift

1 Answer

Just had ac charged on 1995 Chevy Suburban after replacing, nearly, the entire ac system last autumn. Told there were no leaks (vaccum check). However, got the truck home and it still blows warm air and...


you can run the compressor for a few minutes to see if you get cold air with the low pressure switch crossed out. if you don't have cold air after about 5 minutes then you still have a leak somewhere.

Jul 30, 2011 | Chevrolet Chevy Cars & Trucks

1 Answer

I have an 06 Cobalt and recently had the codes P0340 & P0341. I went to the first mechanic who changed the O2 sensor and told me I did not have a camshaft sensor. I then took it to a second mechanic...


I'm not sure what size your engine is but I believe on the 2.2L the camshaft position sensor is at the front right hand side of the valve cover. The 2.4L is the same but with another cam sensor on the exact opposite (back) side of the valve cover, closest to the firewall.I don't know about it on a 2.0L, probably close to the same. The 2.4L also has two cam actuator solenoids (one for exhaust and one for intake, marked on valve cover) on the left hand side of the valve cover, directly on top. Each part costs in a range of $20-60 depending on where you go. Hope this helps.
P0340 - Camshaft Position Sensor Circuit Malfunction
P0341 - Camshaft Position Sensor Circuit Range/Performance

Dec 12, 2010 | 2006 Chevrolet Cobalt

2 Answers

Car stalling and not restarting without jump


check your body grounds sounds like a lose conection and also check the connection at the starter seloniod!!!

Mar 05, 2010 | 1995 Buick LeSabre

Not finding what you are looking for?
2000 Dodge Intrepid Logo

1,435 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

74192 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7194 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...