Question about 1998 Dodge Avenger

2 Answers

Turn signals don't work.

No turn signals even after replacing all four bulbs on a 1998 Avenger. Would this mean a bad fuse?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Rights turn signal will not shut off

Posted on Jun 25, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

It could be several things including the fuse.Do you have a testlight/probe to do a couple of tests?It could be the flasher can.Do the indicators work if you put on the hazard lights?You could try swapping one fuse at a time .Just switch with another fuse of the same color and if they start to work its the fuse and if not its the main supply of power or the flasher can.If the hazards work the circuit from the flasher to the indicators is intact and shouldnt be part of the problem.

Posted on Oct 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix turnsinal in 1991 pontia sunbrird


Bulbs burned out, Flasher bad or the turn signal switch under the steering wheel.

May 09, 2014 | 1991 Pontiac Firebird

1 Answer

Right rear turn signal will not work.


If it's a V6, 10A fuse 17 supplies power to the steering control module which contains the turn signal switch. The switch setting data is fed to the totally integrated power module, which is powered at all times, to generate right turn signal voltage. If the left turn signal is OK, there could be a defect in the TIPM that prevents it from sending 12V output via the WHT/YEL wire to the right lamp. Does the stop function work? The same lamp performs both functions as determined by by the TIPM but may not be implemented in the Avenger.

Sep 22, 2012 | 2008 Dodge Avenger

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

1 Answer

1998 Dodge Durango flasher relays location


Turn on the Durango and check each of the four turn signals to make sure that the bulbs are not burned out. If you find one that has gone out, replace the bulb and retest the turn signals. When a bulb goes bad on this circuit, the resulting operation can mimic a bad flasher or one that is failing.

Locate the combination turn signal flasher and relay. It is on the left end of the driver's dash. Open the access door and view the collection of relays and fuses. At the left side of the mounting block is a larger flasher and relay. This is the combination turn signal flasher and relay.

Test the relay by placing you finger on the relay housing and activating the turn signal. If you have found the right one, you should feel a clicking as the turn signal blinks. Remove the relay, replace with the new relay and close the access door

.

Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.

Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks

1 Answer

Have four way flashers in front of car but no turn signals on front or rear of car but yet i still have parking lights and brake lights and have replaced the bulbs and the fuses are not bad and the flasher...


The most common cause of your problem is the Flasher Unit. Functioning four way flashers doesn't mean the existing unit is working. Also, there are multiple flasher units on some cars. Since the bulbs are all working, replacing the flasher unit makes the most sense.

Dec 11, 2009 | 1994 Chevrolet Cavalier

1 Answer

Turn signals won't blink


relay is bad turn signal relay

Jul 31, 2009 | 1998 Dodge Durango

2 Answers

2008 Dodge Avenger SE - Short in lights but where??


Just because the bulbs look fine, doesn't mean they are. Start with the bulb replacement. If this doesn't solve it, and it has under 36K, it should still be under factory warranty. Shouldn't cost anywhere near $200 either way.

Jun 15, 2009 | 2008 Dodge Avenger

1 Answer

Front turn signals don't flash


flasher unit, available at parts stores cheap

Mar 21, 2009 | 1998 Dodge Avenger

3 Answers

1997 dodge avenger turn signal probs and location


replace the turn signal switch it self, mine did the same thing with the left turn signal, put in fuse and it will continue to flash... went to junk yard pulled one out of a 97 avenger just like mine, swapped them out and now it works fine. looked to be like some corrosion... to repace: 3 screws under columb, 2 screws on side of signal switch (black plastic side). unplug and replace

Mar 20, 2009 | 1997 Dodge Avenger

1 Answer

Turn signals wont work on 95' dodge avenger


try to replace the flasher. it is round and has either two or three prongs on it. it should be by the fuse box.

Mar 03, 2009 | 1995 Dodge Avenger

Not finding what you are looking for?
1998 Dodge Avenger Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...