How do you pull transmission out of 1996 toyota camry

SOURCE: 1996 toyota camry manual

ruby ganda71,
Try this site Does his work?

SOURCE: To remove the interior door panel of a 1996 Toyota camry so that

My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Timmy P.

SOURCE: head gasket on the 1996 4 cyl toyota camry

go to the library and borrow a manual its not a very hard job but you will need a manual.

SOURCE: 1996 Toyota Camry question. If the brakes start

Not at all.

Testimonial: "Thanks!"

SOURCE: 1996 toyota camry termostrat location

should be located where the lower hose meets the engine block inside that unit