Keyless entry remote

just reprogram the 98 fobs to the 97 easier instead of ripping out the electrical system can reprogram lock /unlock if have auto start will need dealer to flash the fob
http://freeremoteinstructions.com/ Free Keyless Remote Fob Entry programming instructions procedures for all...

• HOW TO - Change the battery and quick fix your car remote ...

  ? 9:32
  https://www.youtube.com/watch?v=KzCXGXCe0oc
  Sep 1, 2011 - Uploaded by tyreeztt
  Also if your remote isn't working with a new battery please check out this ... TO - Change the battery and quick fix your car remote / keyless entry ...

  Remote Key does not lock / unlock doors after battery change ...

  www.6speedonline.com/.../208274-remote-key-does-not-lock-unlock-do...
  Apr 17, 2010 - After I changed the battery, it would no longer lock / unlock the doors. ... I can start the call and all .. its just the door and trunk lock / unlock function that does not seem to work . ... now your fob is learned... the keyless entry goes into a "sleep" mode to preserve the batt.. if u do not use the ... Still don't work .

  how do i reprogram my lock remote to my car? i changed my ...

  www.cargurus.com > Questions > Hyundai > Tiburon
  
  CarGurusAug 17, 2009 - i change my battery an now my lock an un lock buttons dont work on my remote how o i reprogram it? ... I have a Hyundai 2003 Tiburon, and the followingworked for me, get ... However for a replacement keyless remote fob, you will have to go to ... And no, they don't do it for free (ranges from $30-$50 in my ...

  Top 5 Tips in Fixing a Keyless Remote ' eBay

  www.ebay.com > ... > Safety & Security > Keyless Entry Remote / Fob
  Key fobs that don't permit entry can be a major hassle for drivers, but fortunately, there... Drivers with a bit of basic electronics experience are often able to replace their ...After confirming that a remote is faulty, try replacing its battery. ... like "Jeep Wranglerkeyless remote," to find listings that will work with specific vehicles.

How to check if your GM car is equipped with factory keyless ...

blog.remotesandkeys.com/.../How-to-check-if-your-GM-car-is-equipped...

Aug 25, 2011 - Many, but not all GM vehicles, are equipped with factory keyless entry. ... If not, and you want to have remote keyless entry, go to an alarm shop or Best .... Your other option is to locate the aftermarket receiver under the dash and ... start but need programmed or how can i check if i have remote start installed.

Remote Start ' Vehicle Features ' Official Ford Owner Site

owner.ford.com/.../vehicle-features/.../remote-start-...

Ford Motor CompanyIf your vehicle has automatic climate control, you can configure it to begin operating when you remote start your vehicle. A manual climate control system will run ...

Factory Remote Start Installed? - Chevrolet Forum - Chevy ..

So , the power door locks won't lock or unlock with switches inside the vehicle or with the keyless entry remote fob.??? Is this correct ????
Do you know what a BCM - body control module is ? Do you know what diagnostic trouble codes are ? If not your best bet would be to take your vehicle to a GM dealer or someother qualified repair shop.
DTC B3142 or B3143
The body control module (BCM) provides an output to the driver switch assembly through the door unlock control circuit for controlling automatic door unlock, anti-lockout, and keyless entry unlock functions.
DTC B3152 or B3153
It could be the driver door master switch , could have broken wires inside the rubber boot from the body to the door . Do the power windows work ?
The keyless entry system has the following main components:
• The transmitters
• The body control module (BCM)
When you press a button on a transmitter, the transmitter sends a signal to the BCM. The BCM interprets the signal and activates the requested function.

How did you do this ,,checked and made sure locks and remote programmed,they were,but still do not work ?????

Need a scan tool to program
Important: All key fobs must be programmed each time any one fob is programmed. The scan tool must stay connected until all of the transmitters are programmed.
Install a scan tool and navigate to the BCM Module Setup menu.
Select Program Key Fobs.
Follow the scan tool on-screen directions.
When the programming operations have completed, operate the transmitter functions to verify correct system operation.

immobilizer control module under the dash.some vechicles if you replace key remote dealership has to reprogram remotes using diagnostic equipment.try this techinique to synchronize remote transmitter. stand within 5 feet from vechicle .press transmitter lock and unlock buttons simultaneously for 7 seconds . system will lock and unlock doors confirming synchronization. if this dont help dealership has to reprogram remotes.

REMOVE REMOTE BACK WHERE BATTERY GOES. TAKE TO ANY AUTO PARTS STORES OR WALMART ELECTRONICS.WHEN NEW BATTERY INSTALLED. YOU CAN TRY TO SYNCHRONIZATION TO REPROGRAM REMOTE.TRY THIS STAND 5 FT FROM VECHICLE.PRESS AND HOLD THE LOCK AND UNLOCK BUTTONS SIMULTANEOUSLY FOR 7 SECONDS.HORN CHIRPS TO CONFIRM SYNCHRONIZATION. IF THIS DONT WORK DEALERSHIP WILL HAVE TO REPROGRAM KEY REMOTE.

It sounds like your FOB needs to be reprogrammed, email me at bigt_wlm@juno.com around thursday and I will try to email you the programming instructions for that, If I am not able to you will need to call a locksmith with a T-Code or MVP Pro key programmer or DODge to programm your remote to your ECU

TRY A NEW BATTERY IN UR KEYLESS REMOTE

think its the cheapo battery put in ,test it with a meter

need to remove door panel either the linkage clip either broke or disconnected --if have remote start on fob need dealer to program--if normal try these links
Lexus Free Keyless Remote Fob Entry programming instructions Free Keyless Remote Fob Entry programming instructions procedures for all...