Question about 1995 Jaguar XJ6

1 Answer

All audible warnings are now inaudible

Put simply, the audible warnings have gone (or are so quiet, they are inaudible). There is no sound when the directional indicator is on. There is no sound when the lights have been left on. Nothing at all. The problem has only recently ocurred - it's very puzzling. I have searched through the manual to discover if there is a fuse that caters for this part of the system, but no luck in finding any reference to it.

Posted by on

  • tony yeatman
    tony yeatman May 11, 2010

    There is a fuse do you know where fuse box is?

×

Ad

1 Answer

For Stormbrewin (clarification request about elzbieta22's problem posted Oct 23):

You wrote 'There is a fuse do you know where fuse box is?'

I reply: Yes. I know of 3 (one in each of the door post pillars and one in the central console). I have looked in the Jaguar manual and I cannot find a description of the fuse. I have been looking for something that describes it as 'Audible Warning fuse' or similar. It might go under a different description - I don't know. If you do know what it might be named as, I would be very grateful to you.

Posted on Oct 24, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 equinox has a NEW delco radio but the front speakers still dont work when you set the fader to the front


Do you still hear warning chimes ?
The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings. The BCM receives audible warning requests via the class 2 serial data line or the controller area network (CAN) data line. If the BCM receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
Do you have base or uplevel system ? Who put in the NEW delco radio ? I suggest you watch this video . GMC Acadia Diagnose Radio Volume Stuck On HIGH Part II A GM radio is the same for chevy , gmc , buick etc... an could need programming , just watch eric .He had radio fixed same problem .Some times you can't get away from going to the dealer.

Nov 11, 2016 | 2005 Chevrolet Equinox

1 Answer

Is there a way to fix the the turn signal chime and other various chimes on a 2009 Chevrolet Cobalt LS, there is no sound from them as well as front speakers?


The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the speaker. The radio receives audible warning requests via the serial data circuit. If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
?€¢
Fast rate chime (200 pulses per minute)


?€¢
Medium rate chime (150 pulses per minute)


?€¢
Slow rate chime (50 pulses per minute)


?€¢


Single chime

May 13, 2016 | 2009 Chevrolet Cobalt

1 Answer

I'm installing a aftermarket stereo in my 2005 grand am se the wire harness adapter for my car requires I run the accessory wire to one of my fuses for whatever reason I need to know which one thanks


Are you aware of the fact that your factory radio is connected to the class 2 serial data communication network . You need a interface module to hook up to aftermarket radios . If you don't use this interface module your vehicle will not start an run an the warning chimes will not work .
The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the left front speaker. The radio receives audible warning requests via the class 2 serial data line. If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:

Dec 11, 2015 | Cars & Trucks

1 Answer

Where is my door chime located impala 2002


It comes through the radio an left front speaker .
The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the left front speaker. The radio receives audible warning requests via the class 2 serial data line. If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The Multifunction Alarm generates the audible warnings on vehicles with RPO UL5 -- Radio Delete Option. The following lists the audible warning priority and the pulse rate:
The radio activates the door ajar audible warning as requested by the body control module (BCM). The BCM sends a class 2 message to the radio indicating the chime frequency of a medium rate and at a continuous duration. The door ajar warning sounds and the door ajar indicator illuminates when the following occurs:
  1. The body control module (BCM) determines that the driver's door is open and the signal circuit low. The IPC receives a message via class 2 from the BCM requesting illumination of the door ajar indicator.
  2. The vehicle is not in park. The BCM receives a class 2 message from the PCM indicating the gear position.
Class 2 Serial Data Link
The class 2 serial data link allows the following modules to communicate and share data with each other:
?€¢
Auxiliary Power Drop Connector


?€¢
Body Control Module (BCM)


?€¢
Driver Information Center (DIC)


?€¢
Electronic Brake Control Module (EBCM)


?€¢
Instrument Panel Cluster (IPC)


?€¢
Powertrain Control Module (PCM)


?€¢
Radio


?€¢
Remote Playback Device-CD Player (if equipped with UQ3)


?€¢
Inflatable Restraint Sensing and Diagnostic Module (SDM)


?€¢
Vehicle Interface Unit (VIU) (if equipped)

The class 2 serial data link allows a scan tool to communicate with the above modules for diagnostic and testing purposes.

Nov 16, 2015 | Cars & Trucks

1 Answer

On 3 occasions have had 3 loud audible warning beeps, but no warning lights come on, when stationary at traffic lights, with neutral gear and handbrake on.


Sound like a brake on warning so you don't put in gear and drive with the break on however a brake light should come on but it maybe Burt out

Jul 27, 2015 | Cars & Trucks

1 Answer

P0401 code


Do you not look up the codes & diagnose them?

Google PO401

Jan 06, 2013 | Mitsubishi Cars & Trucks

2 Answers

2004 NISSAN SENTRA . THE VOLUME OF THE RADIO STOPPED WORKING. THE KNOB WORKS, THE BUTTONS FOR DIFFERENT RADIO STATIONS WORK. THERE IS JUST NO VOLUME.


same this happned to me in my 2006 sentra. the volume for the radio is gone. i can tune, its just barely audible/ quiet. weirdly though it sounds perfect when playing CDs. i almost thought maybe it got switched in to mute mode or something. did you figure out your problem?

Jun 17, 2010 | 2002 Nissan Sentra

1 Answer

I HAVE REPLACED THE BATTERY IN MY KEY FOB BUT IT IS NOT WORKING. IS THERE ANYWHERE I CAN BUY A NEW CIRCUIT BOARD FOR IT?


NOTE: If a double audible warning sounds during the programming procedure a system malfunction has occurred. Repeat programming procedure.
Obtain all keys fitted with remote control. Open driver's door. Operate headlamp high/low beam switch to flash high beam position and hold. Insert key into ignition switch, turn to ACC position. Ensure system LED flashes once and an audible warning sounds. Operate headlamp high/low beam switch to flash high beam position 5 times. Ensure system LED flashes once and an audible warning sounds. Programming mode activated: Press and release lock or unlock button on first key. Ensure system LED flashes once and an audible warning sounds to indicate correct programming. Repeat programming procedure for remaining keys. Switch ignition OFF and remove key. Close driver's door. Check operation of keys. Keys can also be programmed using diagnostic equipment.

Mar 21, 2010 | 2002 Jaguar S-Type

1 Answer

Key fobs not working i have changed the battries on both


: If a double audible warning sounds during the programming procedure a system malfunction has occurred. Repeat programming procedure.
Obtain all keys fitted with remote control. Open driver's door. Operate headlamp high/low beam switch to flash high beam position and hold. Insert key into ignition switch, turn to ACC position. Ensure system LED flashes once and an audible warning sounds. Operate headlamp high/low beam switch to flash high beam position 5 times. Ensure system LED flashes once and an audible warning sounds. Programming mode activated: Press and release lock or unlock button on first key. Ensure system LED flashes once and an audible warning sounds to indicate correct programming. Repeat programming procedure for remaining keys. Switch ignition OFF and remove key. Close driver's door. Check operation of keys. Keys can also be programmed using diagnostic equipment

Jan 31, 2010 | 2002 Jaguar X-Type

1 Answer

I have a 1999 Olds Intrigue, headlight left on alarm is stuck


The Body Control Module (BCM) controls the audible warnings. Refer to Body Control System Description in Body Control System for more information regarding the BCM.
The body control module (BCM) controls these reminders:
• Key in ignition reminder: An audible warning intended to remind the driver that the key has been left in the ignition cylinder. The BCM sounds the chime for this reminder at a rate of 150 chimes per minute.
• Fasten seat belt reminder: An audible warning intended to remind the driver at the beginning of the driving cycle that the driver's seat belt is unfastened. The BCM sounds the chime for this reminder at a rate of 50 chimes per minute.
• Fasten belts indicator control: A visual warning intended to remind the driver that the driver's seat belt is unfastened.
• Parking brake reminder: An audible warning intended to remind the driver that the parking brake has been left applied with the transaxle shifted out of PARK. The BCM sounds the chime for his reminder at a rate of 200 chimes per minute.
• Turn signal reminder:
An audible warning intended to remind the driver that the turn signal has been left on while the vehicle has traveled over 1.2 km (¾ mile). The BCM sounds the chime for this reminder at a variable rate (in unison with the turn lamps on) of 90 chimes per minute.
• Headlamps ON reminder: An audible waring intended to remind the driver that the headlamps have been left on. The BCM sounds the chime for this reminder at a rate of 200 chimes per minute.
• Last door closed locking confirmation: An audible warning intended to provide the driver feedback that the last door closed locking feature is active. The BCM sounds the chime for this remainder at a rate of 200 chimes per minute.
• Feature customization and diagnostics feedback: An audible feedback used when changing feature customization modes. Also used by service technicians during the BCM diagnostics. The BCM sounds the chime during the feature customization, and also during diagnostics. Refer to Body Control Module (BCM) for additional information.

Step
Action
Value(s)
Yes
No
1
Was the BCM diagnostic system check performed?
--
YES - Go to Step 2
NO - Go to Diagnostic System Check - Body Control System in Body Control System
2
Check for Powertrain Control Module (PCM) Diagnostic Trouble Codes (DTCs). Refer to Powertrain On Board Diagnostic (OBD) System Check (LX5) or Powertrain On Board Diagnostic (OBD) System Check (L36) in Engine Controls for more information.
Are there any PCM DTCs present?
--
Go to Appropriate DTC Table in Engine Controls
Go to Step 3
3
Connect a scan tool to the Data Link Connector (DLC).
Using scan tool, select BCM data display inputs and monitor the park brake switch input.
While observing the scan tool, apply and then release the park brake.
Does the scan tool indicate that the park brake input is off while the park brake is released?
--
Go to Step 7
Go to Step 4
4
Turn the ignition switch off.
Disconnect the scan tool from the DLC.
Disconnect the BCM connector C1.
Release the park brake.
Using a test light, connect between B+ and the BCM connector C1 terminal D5.
Is the test light off?
--
Go to Step 7
Go to Step 5

Your best bet ,take it to a qualified repair shop

Aug 01, 2017 | 1998 Chevrolet S-10 Pickup

Not finding what you are looking for?
1995 Jaguar XJ6 Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

yadayada
yadayada

Level 3 Expert

77514 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...