Question about 1996 Subaru Legacy
It is underneath the intake manifold. If you look straight down from the throttle body, you will see a sensor with one wire coming out and a bolt going through the middle of it, that is the knock sensor.
Posted on Feb 11, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Location of knock sensor, 1997
stand at the front drivers tire, Peer over just below where the throtle cables connect onto the side of the throtle body, Now look straight down. It's that round black thing bolted to the top of the motor with a wire coming out over to a connector under the intake manifold.
Posted on Aug 06, 2008
SOURCE: fuse box location on 2002 Subaru
my books say there are two. one inside vehicle on drivers side below dash to the left of the steering wheel. the other is in the engine compartment on the drivers side by fender
Posted on Jan 09, 2009
directly below the throttle body on the drivers side of the engine block. Has a white connector attached to a single black wire lead. I had to remove the black plastic piece that connects to the throttle body and the air filter housing, in order to see/get at it. Easy fix once you find it. Haynes manual shows it in a different location, so don't confuse yourself looking at the diagram.
Posted on Jul 27, 2009
Here you go:
2.5L Engine To Remove:
Hope this helps...
Posted on Nov 12, 2009
Tips for a great answer:
Jan 03, 2014 | 1996 Subaru Legacy
Nov 29, 2013 | 1998 Subaru Legacy
Apr 16, 2010 | 2007 Subaru Impreza Outback Sport Wagon
Jun 26, 2009 | 1997 Subaru Legacy
Dec 22, 2008 | 1996 Subaru Legacy
Nov 21, 2008 | 2007 Subaru Impreza Outback Sport Wagon
220 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: