Question about 2002 Chevrolet TrailBlazer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This is actually an easy swap out. Remove the electrical connection, remove the retaining bolt and pull out old one. I believe the sensor is located in the front passenger side of the engine on this particular model.
Posted on Aug 16, 2008
The blower motor resistor card is located under the glove box. You have to take the bottom panel from underneath the glove box out(be careful not to break the wire clip that holds the wires in place on that panel). Once you take the panel loose look in the back. You will see the blower motor. Behind the blower motor is the card. You will need a 9/32 for the panel and a 7/32 for the card. It is only 4 screws total to remove and 2 wire harness clips. It is about a 15 minute job. Good luck and hope this helps. Auto Zone has the part for around $15.00 and will have the step by step instrutions for you also if you need it free of charge. I think the dealer charges $109.00 for this repair.
Posted on Jun 17, 2009
I'm looking for this part too. The shifter arm in my Trailblazer has become disconnected from the transmission cable and I currently have it held on with wrap ties. Any luck finding this part and installing it?
Posted on May 27, 2010
Tips for a great answer:
May 23, 2016 | Cars & Trucks
Nov 06, 2015 | 2008 Chevrolet Chevrolet TrailBlazer LT
Jan 16, 2014 | 2005 Chevrolet TrailBlazer LT
Jul 12, 2012 | 2007 Chevrolet TrailBlazer SS
Feb 13, 2011 | 2002 Chevrolet TrailBlazer
Apr 12, 2017 | 2006 Chevrolet Trailblazer
Jul 07, 2010 | 2003 Chevrolet TrailBlazer
Apr 13, 2010 | 2002 Chevrolet TrailBlazer
Jun 30, 2009 | 2002 Chevrolet TrailBlazer
776 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: