Question about 2006 Toyota Highlander
2006 highlander, how to remove maintenance cap from dashboard
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This is the reset proceedure for a 2008 Highlander with a key-type ignition:
Turn the key ON, do not start the engine.
Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.
Turn the key ON, do not start the engine
Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..
Now release the black trip meter reset stick.
This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.
Hope this helps! Thanks for choosing FixYa!
Posted on Nov 17, 2008
turn ignition key to 'acc' or 'lock' position press and hold tripmeter knob while pressing knob turn key to 'on' but do not turn over engine release trip when light goes out
Posted on Apr 13, 2009
Revised procedure (for Highlander)
Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.
Turn ignition key to OFF.
Hold in the same button you used in step 1.
While holding the button in, turn ignition key to 'ON'.
The 'Maint Reqd' light should blink and go out.
Posted on Jul 02, 2009
The maintenance light needs to be reset manually. See my Tips and Tricks on this website for additional information on how to reset it.
You should also check your spare tire for proper inflation. It will set the tire pressure light, as the spare is monitored also. If all 5 tires are OK, you may have a malfunctioning tire pressure sensor. If the tires have been changed recently, people with older tire machines have been known to break the sensors regularly, by mistake.
Posted on Aug 10, 2009
Tips for a great answer:
May 02, 2017 | Toyota Cars & Trucks
Oct 12, 2015 | 2005 Toyota Highlander
Jul 29, 2014 | 2006 Toyota Highlander
Jul 12, 2012 | 2008 Toyota Highlander
Feb 09, 2012 | 2006 Toyota Highlander
Oct 06, 2011 | 2005 Toyota Highlander
Jun 22, 2010 | 2006 Toyota Highlander
May 20, 2010 | 2006 Toyota Highlander
Aug 10, 2009 | 2009 Toyota Highlander
213 people viewed this question
Usually answered in minutes!