Question about Plymouth Cars & Trucks

1 Answer

Where is the ignition module in a 99 voyager - Plymouth Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 17,970 Answers

Hi Eric:
Also called Ignition Coil, is located at the back of the intake manifold...

where is the ignition module in a 99 voyager - 2_11_2012_12_07_40_pm.jpg

Fig.: remove the 2 lower ignition coil mounting bracket bolts...


2_11_2012_12_08_55_pm.jpg

Fig.: then remove the ignition coil and mounting bracket together from the engine.

Disengage the wiring harness connector from the ignition coil.
Disconnect the ignition wire from the coil.
Remove the coil mounting bracket bolts, then remove the coil and mounting bracket assembly from the vehicle.
The ignition coil can be separated from the mounting bracket.

To install:

If separated, loosely mount the ignition coil to the mounting bracket.
Loosely install the coil and mounting bracket assembly to the intake manifold. Tighten the coil mounting bracket-to-intake manifold bolts to 115 inch lbs. (13 Nm) and the ignition coil-to-mounting bracket fasteners to 96 inch lbs. (10 Nm).
Connect the ignition wire to the coil.
Engage the wiring harness connector to the ignition coil.
If removed, install the windshield wiper/motor module assembly.
Connect the negative battery cable.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Feb 11, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

99 Plymouth voyager and these codes came up p0731, p0732, p0736, p0700 what can i do about it


Probably not much you can do yourself.
Code 700 is a general fault code for the transmission or control module. Code 731 is for incorrect ratio for first gear, 732 is for 2nd gear, and 736 is for reverse. The actual problem could be mechanical or electrical, including the transmission control module.
You would need a shop manual and the necessary tools to check the circuits and solenoids inside the transmission.

Feb 09, 2014 | Cars & Trucks

1 Answer

99 voyager starting problems


Your ignition switch is going bad. The strange noise is the starter remaining engaged and locked to the flywheel. Your best bet is to have the starter tested at your local auto parts store, to deduce that it is not, in fact, your starter.

Nov 05, 2013 | 1999 Plymouth Voyager

1 Answer

Plymouth voyager 1996 wont start


something stupid either fuel pump or ignition module

May 11, 2012 | 1996 Plymouth Voyager

1 Answer

Where is the ignition module on a 99 plymouth voyager


Also called Ignition Coil, is located at the back of the intake manifold...

2_11_2012_12_07_40_pm.jpg

Fig.: remove the 2 lower ignition coil mounting bracket bolts...


2_11_2012_12_08_55_pm.jpg

Fig.: then remove the ignition coil and mounting bracket together from the engine.

Disengage the wiring harness connector from the ignition coil.
Disconnect the ignition wire from the coil.
Remove the coil mounting bracket bolts, then remove the coil and mounting bracket assembly from the vehicle.
The ignition coil can be separated from the mounting bracket.

To install:

If separated, loosely mount the ignition coil to the mounting bracket.
Loosely install the coil and mounting bracket assembly to the intake manifold. Tighten the coil mounting bracket-to-intake manifold bolts to 115 inch lbs. (13 Nm) and the ignition coil-to-mounting bracket fasteners to 96 inch lbs. (10 Nm).
Connect the ignition wire to the coil.
Engage the wiring harness connector to the ignition coil.
If removed, install the windshield wiper/motor module assembly.
Connect the negative battery cable.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 10, 2012 | Cars & Trucks

1 Answer

How to replace a fan relay on a 99 plymouth voyager?


The fan fuse in the 99 Voyager is located in the
under-dash "Power Distribution Center" - the fan fuse is #24 (40Amps - Orange).

How to replace a relay: pull the old one out, then correctly orient and insert the new one.
Its almost impossible to make an orientation mistake, since relays generally can only be
inserted one way (they're deliberately designed to be impossible to insert incorrectly).

Flashers are located either on the bottom of the fuse block or on a module under the dashboard (instrument panel). They are replaced by simply pulling them straight out. Note that the prongs are arranged in such a way that the flasher must be properly oriented before attempting to install it. Turn the flasher until the orientation of the prongs is correct and simply push it firmly in until the prongs are fully engaged.

The 99 Voyager "Power Distribution Center" is located:
Front seating area, driver side, under dash -- see photo below.


_88.gif

For completeness, here's the remainder of the fuse directory for the "Power Distribution Center"

_1953.jpg

Here's the directory of the Relays in the "Power Distribution Center": Note that
"fan relay" is not one of them.

_1955.jpg

Photo of location of "Power Distribution Center" - essentially its under the steering wheel.

_1954.jpg

For completeness, here's a photo of location of the engine compartment "fuse block":

_1956.jpg

Here's a directory of the 99 Plymouth Voyager engine compartment "fuse block"

_1957.jpg

These small-ish images can be enlarged by Right-Click"-ing on them, selecting "Save As..."
then viewing/enlarging them using "Microsoft Picture and Fax Viewer," which should open
these images automatically on most Windows computers by double-clicking on the image file.

Sep 14, 2011 | 1999 Plymouth Voyager

1 Answer

I have a 96 voyager that run good for a little will but it stop running till i let it set for a will then it go's good agine


It is probably the ignition module but I would bring the van to an auto zone or advanced auto parts store to have them check for trouble codes these codes if present will give you a hint what is going wrong howevere if I had to figure the problem out without the codes I would say it is either an ignition module, O2 sensor or the ignition wires could be leaking voltage as they heat up causing them to fail to deliver adequate voltage for spark plug operation.

Nov 03, 2009 | 1996 Plymouth Voyager

2 Answers

99 voyager no crank, wipers, radio and power windows. bcm?


Check power distribution panel near battery for blown fuses.

Feb 08, 2009 | 1999 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...