Question about 1997 Chevrolet Blazer

Open Question

Diagram to replace the front input seals on NP233 transfer case

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 33 Answers

SOURCE: 1996 chevy blazer housing between transmission and

No. The out-put shaft on the tranny goes straight through and there are no seals except for the transfer case out-put shaft. There is only a gasket that seals the two cases.

Posted on Jul 28, 2009

bsdracing
  • 57 Answers

SOURCE: leaky front seal on tronsfer case

depending on if its is from the drive shaft or the main shaft either way you will have to do a bit of work if it is the driveshaft seal I believe you can remove shaft and change seal with case in truck but dont qoute me on that if not remove transfer case and at that point it is pretty much the same amount of work for the main or the driveshaft side. get yourself either a rented or borrowed tranny jack and drain fluid before removal make sure you have all little tubes and wires off before you try and wrestle it out have a friend around for saftey good luck be careful and hope this helps

Posted on Apr 30, 2010

tripletauto
  • 1450 Answers

SOURCE: I have a 2001 4 door chevy tracker and I need part

I believe this is the part number you need. 96059653 this is a gm number

Posted on Nov 11, 2010

  • 3911 Answers

SOURCE: I have a 1984 K5

take it out, take it apart, replace the seal, put it back together, put it back in.

Posted on Dec 13, 2010

  • 157 Answers

SOURCE: have 2001 chevy s10 np233 transfer case can hear

It may be that the traction control system only allows the front wheels to operate when needed.

Posted on Feb 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Transmission fluid leak


the input seal to the transfer case may have been damaged on installation, seeing that its a used unit seals may have been worn and should have been replaced befor install

Jul 25, 2014 | 2004 Ford Explorer

1 Answer

Where can i get a wiring diagram for a 2000 four wheel drive chevy blazer with a np233 transfer case


https://www.google.com/search?q=2000+chevy+blazer+wiring+diagram&hl=en&client=firefox-a&hs=wzu&tbo=u&rls=org.mozilla:en-US:official&tbm=isch&source=univ&sa=X&ei=rtUMUYWtGOeayAH-uIHQDA&sqi=2&ved=0CDAQsAQ&biw=1166&bih=600

Feb 02, 2013 | 1998 Chevrolet Blazer

2 Answers

Does anyone know of a website i can get a diagram of my 03 2500hd's tranny and transfer case, cant figure out where my atf leak is coming from.


LEAK AT TRANSFER CASE COMING FROM DIFFERENTIAL PINION SEAL OR THE TRANSFER CASE SEAL LEAKING.YOU CAN GO ON LINE TO ON LINE AUTO REPAIR MANUAL ON AUTO DATA MANUALS YOU SHOULD BE ABLE TO FIND TRANSFER CASE DIAGRAM BUT YOU HAVE TO PAY TO USE SITE FOR 3 TO 6 MONTHS.

May 05, 2011 | 2003 GMC Sierra 2500HD

1 Answer

Have 2001 chevy s10 np233 transfer case can hear it shifting but only got rear wheels spinning..raise off ground get front to spin..


It may be that the traction control system only allows the front wheels to operate when needed.

Feb 06, 2011 | 2001 Chevrolet S-10

1 Answer

How is transfer case oil entering into 5 speed main transmission? 1999 dodge diesel 3500 4X4 when you are driving long distances nothing because i don't know how to fix it.


there is a seal which has failed on the input shaft of the transfer case. Replacement is possible by removing the transfer case for access.

Sep 05, 2010 | 1999 Dodge Ram

1 Answer

Replacing the front transfer case oil seal


don't stress about your springs just undo the shocks and sway bar and keep lifting the car you will unload the spring no tools needed...

Dec 30, 2009 | 2004 Toyota Land Cruiser

2 Answers

What kinda oil do you use for the transfer case


it is from gm a blue oil called automatic transfer case oin

Nov 07, 2009 | 1999 GMC Jimmy

1 Answer

Transmission fluid leaking back, 1988 Ford Bronco


your output seal on the tranny or input seal on your transfer case is bad. you have to pull your transfer case to tell. this is a pretty straight forward job. block wheels. put transfer case in neutral. drop front and rear drive lines.diconnect transfer case shift linkage. there is a short commponent connecting the trans to the transfer case. the bolt on either end face each other. remove the bolts to the transmission. the transfer case is heavier than it looks, i suggest getting help. pull back on the transfer case until it will drop down. it will pull out a bit because of the trans output shaft. replace what will probibly turn out to be the tranny output shaft seal and reassemble in reverse order.

Nov 06, 2009 | 1988 Ford Bronco II

2 Answers

Where can I find a diagram on how to replace a seal between the transmision and transfer case on my 2000 GMC Z71? It's leaking trans fluid.


ther are no diagrams. It's not to bad to do. You need to remove the speed sensor(there are 3 of then) Disconnect the encoder motor, the drive shafts, the transmission support and it's 6 15mm nuts and pull the t-case back and twist clockwise and it comes out. You have to support the transmission on a jack to lift it for more clearence

Sep 16, 2009 | 2000 GMC New Sierra 1500

2 Answers

What;s the oil capacity for a 2002 chevy trailblazer 4.2 6 cyl?


Here are the Fluid CAPACITIES & MORE:
Engine, with filter..........4.6 quarts[1]
Cooling System, Initial Fill..........12.0 quarts
Automatic Transmission, Total Fill
4 speed 4L60, 60E..........11.0 quarts
Manual Transmission, NV1500..........5.7 pints
Manual Transmission, NV3500..........4.2 pints
Differential, with 8.6 ring gear Rear..........4.0 pints
Differential, with 7.25 ring gear Front..........2.5 pints[2]
Differential, with 8.25 ring gear Front..........4.2 pints[2]
Differential, with 9.25 ring gear Front..........5.9 pints[2]
Differential, Front..........2.5 pints
Differential, Rear..........4.0 pints
Transfer Case,BW4472..........2.5 pints
Transfer Case,NV136/236/246..........4.0 pints
Transfer Case,NP207..........4.6 pints
Transfer Case,NP231, NP233..........2.3 pints[3]
Transfer Case,NV231/233..........2.1 pints[3]
1. After refill check oil level.
2. Do not use synthetic lubricant in axles using RTV sealant.
Synthetic lubricant will chemically atack RTV sealant.
3. Identification: check tag on case.

Apr 13, 2009 | 2002 Chevrolet TrailBlazer

Not finding what you are looking for?
1997 Chevrolet Blazer Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...