Question about 2006 Toyota Sienna

Open Question

How to fix sliding door on toyota sienna - 2006 Toyota Sienna

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: The sliding door handles of my 1998 Toyota Sienna have both broken.

OK, here you go:

Pry out on the bottom of the cupholder bottom, relieve 2 clips, pull the bottom out & slide it down

Remove the door trim screw, and pry out on the door panel, relieve 10 clips, pull door trim off

Remove the horizontal upper trim cover at the top of the door; relieve 4 clips

Remove the vertical door trim cover; relieve 2 clips

Remove the window garnish around the handle; pull the small trim cover off; remove 3 screws
This exposes the inside handle

The inside handle is retained by 2 screws.

Posted on Sep 27, 2008

Ad

SOURCE: 2005 Toyota Sienna Sliding Door Won't Open

Replace the battery or reset the computer could work. My 2 cents.

Posted on Nov 03, 2008

  • 154 Answers

SOURCE: could not open driver side manual sliding door in my 2003 Sienna

need to remove inner panel.. be careful not to break panel... ck latch seems broken.. o

Posted on Aug 04, 2009

  • 34 Answers

SOURCE: both manual sliding doors on my Toyota Sienna will not open

If you can remove the inner door panel you will see a maze of cables running to the various locking points on the sliding door. If the cable going to the FRONT latch on the sliding door is broken (or in my case, simply dislodged inside the door) the door acts as if it is frozen shut.

The front cable is short, and easily replaced even by a newbie mechanic.

Posted on Aug 11, 2009

  • 4 Answers

SOURCE: 2005 Toyota Sienna XLE - Automatic sliding door not closing.

This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however:
You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2013 Toyota sienna sliding door panel removal


Go to the provided Google webpage link and choose the YouTube video that suits what you are trying to repair. Click this link. remove the 2013 Toyota sienna sliding side door Google Search

Jul 26, 2017 | Toyota Cars & Trucks

1 Answer

Fix 2007 toyota sienna 2007 sliding door


Your question is too vague about the "problem". Is it alignment, latching, locking, handle, etc.? Try looking at the following links:
https://www.facebook.com/Toyota-Sienna-Faulty-Power-Sliding-Doors-233250320033754/
or http://www.siennachat.com/forum/66-problems-maintenance-repair/1300-sienna-power-sliding-door-problems-thread.html
hopefully you will find a solution there.

Mar 27, 2016 | 2007 Toyota Sienna XLE

1 Answer

02 Toyota Sienna power sliding door not working


See if power reaches the motor. If it does and motor does not operate you have found the problem. If no power then the issue is electrical in nature and you will have to trace the current flow to the motor.

Apr 11, 2017 | Cars & Trucks

1 Answer

2005 Toyota Sienna LE Driver Side Power Sliding Door When the door is closed and latched, the motors makes noise, and the door moves the tiniest bit, but it doesn't open. The same happens in the fully...


Try this... it fixed my problem whereby the 2005 Toyota Sienna passenger sliding door would sometimes open and sometimes not, yet I could hear the motor trying to open/close it. It cost me 20 minutes and 10 drops of oil, not $1200.

First, get the door open. It took me two weeks of constant trying, but it finally opened.

Next, remove the plastic covering of the inside door handle this way: locate the two screws on the forward edge of the sliding door near the child-safety switch: (the switch is a small lever near the door latch, on the forward edge of the door) loosen and remove the two phillips screws, one above the child-safety latch, and one below.

Remove the plastic cover to expose the gears for the door open/close mechanism.

There's a bunch of intricate plastic and metal parts in there, all coated with white grease. I used some 3-n-1 oil to lubricate everything in there thoroughly, In my case, there was one part that was a little void of grease, hence it "stuck" occasionally.

Test the system. If it's Okay, replace the plastic cover, and re-install the screws.

Now my Toyota Sienna 2005 door never fails to open or close.

Oct 20, 2010 | 2004 Toyota Sienna

1 Answer

2001 Toyota Sienna r.h. sliding door ''rear latch switch'' location


To start, the noun "''rear latch switch'' is incorrect. It's actually called "Slide Door Lock". It's located on page BO-20 of the Toyota Repair Manual for the 2001 Sienna. There are two door locks on one sliding door. One in the front and one in the rear. Obviously, you want the one in the rear. The location for the "Slide Door Lock" (which also contains an electric switch) is in the rear of the sliding door located mid way up door. You can see (sliding door opened from the back) it without dissembling the door. And, the lock is made up of plastic (dirty white in color).

Mar 06, 2010 | 2001 Toyota Sienna

1 Answer

2000 Toyota Sienna Sliding Door Latches Stick - Safety Hazard


clean and lubricate door sliding mechanism and locks with silicone spray lubricant, clean all door seals and jambs 

Oct 09, 2009 | 2000 Toyota Sienna

3 Answers

2005 Toyota Sienna XLE - Automatic sliding door not closing.


This may or may not work depending on exactly what is wrong with the door, I cant tell what is wrong without looking at it directly however:
You can try starting with all doors closed and unlocked, keys in hand disconnecting the battery and letting the vehicle sit for 2 min or so, then reconnect the battery. Put the key into the ignition and turn it to the on position but do not start the van. Next press the button to disable the power sliding door for the drivers side, then manually open the door fully, wait 5 seconds, then close it manually fully. Press button the button again to re-enable the power sliding door, then try to use it with the automatic feature either by pulling the handle or using your remote, this may or may not work depending on if the door has somehow become de-initialized (it should work now) however if something is broken inside the door closing mechanism or door closed/open sensors, the door will continue to malfunction.

Aug 23, 2009 | 2004 Toyota Sienna

1 Answer

Both manual sliding doors on my Toyota Sienna will not open


Check out this youtube video for taking off the interior door panel and resetting. https://www.youtube.com/watch?v=MkC2OiOiE_U

Apr 09, 2017 | 2000 Toyota Sienna

1 Answer

2004 Toyota Sienna LE sliding door failed after battery jumpstart


could very well be the relay for the power door and possibly the interior light relay... they are located in the fuse panel under the dash.

Robert

Jan 23, 2009 | 2004 Toyota Sienna

Not finding what you are looking for?
2006 Toyota Sienna Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...