Question about 1996 Chevrolet Suburban

1 Answer

Automatic windows on work from driverside door panel

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,370 Answers

For all types of power window problem and power windows not working,i suggest you to go through the help links given below. Click the link to go through its procedure to troubleshoot the problem :------

Power window problem
http://repairhelpcenter.blogspot.com/2012/01/pontiac-grand-am-power-window-not.html
------------

Power windows not working after car wash?http://howtobyme.blogspot.com/2011/11/power-windows-not-working-after-car.html
---------

power locks, power window and power mirror not working?
http://howtobyme.blogspot.com/2011/09/power-locks-power-window-and-power.html
------------
All power windows not working?
http://howtobyme.blogspot.com/2011/09/all-power-windows-not-working-on-2003.html
------------
How to remove window motor and regulator on Volkswagen Car?
http://howtobyme.blogspot.com/2011/09/how-to-remove-window-motor-and.html

-------------

Complete Diagnosis & Testing Power Windows?

http://repairhelpcenter.blogspot.in/2012/02/diagnosis-testing-power-windows.html
-----------This will help.Thanks.

Posted on Mar 02, 2012

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Tech Jenkins
  • 359 Answers

SOURCE: 2001 malibu rear driverside window off track

Just take a phillips screw driver, and a good sturdy putty knife, and your fingers, and just pry the plastic away from the metal of the door...

Open the door first, and where the inside door handle there should be 1 or 2 screws, and one near where the handle is to open the door from the inside. Take these out first before attempting to pry off the door panel. The panel is held onto the door by plastic snaps shaped like an enlongagted tooth.

Use COMMON SENSE AND BE GENTLE YET FIRM....

Don't be surprised if you have to get a whole new window motor assembly, alot of times they come as one assembly and seperate parts do not exist. Good Luck!!

Posted on Aug 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i repair the wiring to the other windows in my 2001 Buick Lesabre Custom? Only my driverside window and power lock works


FIRST MAKE SURE YOU DID NOT LOCK THE WINDOW, BY RELEASING THE BUTTON, THEN REMOVE DOOR PANEL ON PASSENGER SIDE , UNPLUG WINDOW MOTOR, AND TEST FOR POWER AND GROUND AS SOME ONE PUTS THE WINDOW DOWN FROM BOTH SWITCHES, IF POWER AND GROUND IS THERE REPLACE MOTOR, IF NO POWER THERE CHECK SWITCH, POSIBLE BAD SWITCH, BUT IF YOU SUSPECT WIRING , CHECK THE DOOR JUMB ON DRIVERS SIDE, INSIDE THE RUBBER BOOT MAY BE ONE OR MORE BROKEN WIRES , REPAIR THEM. NORMAL

May 08, 2014 | Cars & Trucks

1 Answer

Control panel


Test the control pamel for power in, it is an orange wire.

Apr 30, 2012 | Cars & Trucks

1 Answer

Driverside windowcontrol panel does not work


I had the same problem with my vehicle and i removed the panel and there are plugs and wires that connect to each section of the panel either one or more have become loose and cant connect or you might had a frayed wire.

Mar 21, 2012 | 2003 GMC Envoy

1 Answer

Door lock and opwer windows panel does not work


check your wires between the door panel and the cab. ive had this happen 2 or 3 times. you probaly have a broken wire. all power is run through the driverside door panel. the back windows worked and so did the locks on all other doors.

Feb 07, 2012 | 2004 Jeep Grand Cherokee

1 Answer

Power windows not working


check for blown fuses?you've most likely done that. open hood and look on the driverside fenderwell for a black main fuse and relay center or box, open the box and look under the lid for locations of relays and fuseslocation the fuse for electric widow and as you look at the fuse,you will see a horseshoe type metal ring inside the plastic 'window' if it's broken(the hORSESHOE} the fuse is bad and needs a new one.there is also a fuse panel located on the driverside of dash,open the door and you should see a removeable plastic cover on the drivers door at dash panel just to the left where the door closes. remove that cover to expose the fuse panel to inspect for blown fuses. thank you for choosing fixya.com

Apr 08, 2011 | 1994 Buick Century

1 Answer

On the driverside control panel the front windows and door lock switches do not work. I am guessing it is a fuse or switch but can't locate a seperate fuse for that panel only


look through the owners manual it will give you a break down of fuse pannel what fuses protect what circuits also check if door lock or windows work on any other door if they work then it is not a fuse and will be directly related to main combination switch on door try this first

Jan 14, 2011 | 2006 Jeep Commander

1 Answer

2004 ford freestar power windows only work sometimes


hi, the problem is not the door switch, had the same problem . bought a new switch but didn't solve the problem. I decide to open the door panels and hit window motor gently and wallah ,it worked.

Oct 21, 2009 | 2004 Ford Freestar

1 Answer

Front window removal


Remove inner door panel, pull plastic back and you will need to reconnect the window switch (with the door panel off) move the window up or down untill you can see the 2 bolts 10mm I think. After they are removed the window will pull out.

Sep 27, 2009 | 2001 Ford Taurus

1 Answer

Power window stopped working


the window probably jumped off the track. you will need to pull the door panel off to see anything

Mar 27, 2009 | 2004 Mitsubishi Outlander

1 Answer

2001 malibu rear driverside window off track


Just take a phillips screw driver, and a good sturdy putty knife, and your fingers, and just pry the plastic away from the metal of the door...

Open the door first, and where the inside door handle there should be 1 or 2 screws, and one near where the handle is to open the door from the inside. Take these out first before attempting to pry off the door panel. The panel is held onto the door by plastic snaps shaped like an enlongagted tooth.

Use COMMON SENSE AND BE GENTLE YET FIRM....

Don't be surprised if you have to get a whole new window motor assembly, alot of times they come as one assembly and seperate parts do not exist. Good Luck!!

Aug 23, 2008 | 2001 Chevrolet Malibu

Not finding what you are looking for?
1996 Chevrolet Suburban Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...