Question about 2004 Hyundai Santa Fe
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Which engine?? V6 or the 2.4I? The V6 CKP is in the engine block near the flywheel side of the engine (behind and lower right of the exhaust manifold nearest the radiator) A 10mm bolt holds it in place. On the 2.4 4cylinder, the sensor is at the front of the engine behind the Timing Belt cover at the crank shaft. To replace it, you have to remove the timing belt, but you also need to know some technical things to reinstall the belt to be sure you are installing it correctly. Go to http://www.hmaservice.com/ and register. You'll then have access to lots of technical info and manuals, wiring diagrams, etc. about your vehicle.
Posted on May 28, 2009
If you live in the US, take it to qany Auto Zone store and thy will read the codes off for you, I would suspect any right thinking competitor would do the same, check if you don't have one near by.
Hope this is of some help.
Posted on Apr 21, 2009
Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.
Posted on May 16, 2009
there are 2 covers that are over the plugs the first is the big silver and black cover that has four
10mm bolts remove them and then there is a small black cover that is inbetween the two humps on the valve cover i think that there 6 bolts that holdthat down remove this and the coils and plug wires are visable
Posted on Jun 13, 2009
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
Posted on Oct 05, 2009
Tips for a great answer:
Nov 26, 2015 | 2001 Hyundai Santa Fe
Jul 17, 2011 | 2003 Hyundai Santa Fe
Feb 17, 2011 | 2004 Hyundai Santa Fe
Apr 26, 2010 | 2004 Hyundai Santa Fe
Apr 23, 2010 | 2004 Hyundai Santa Fe
Oct 24, 2009 | 2004 Hyundai Santa Fe
Oct 16, 2009 | 2004 Hyundai Santa Fe
Oct 04, 2009 | 2004 Hyundai Santa Fe
Apr 30, 2009 | 2004 Hyundai Santa Fe
238 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: