Question about 2000 Oldsmobile Bravada

1 Answer

How to chang the number 1 plug behind the sterring colum

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 5,332 Answers

It's actually the number three plug that is behind the steering column. They make a special socket just for this plug. Wharf you spark plug socket has a hex end on it than install it and use a wrench to turn the plug out. It is tedious but it will work. If you spark plug socket does not have the hex end than you can either get one or get the special tool. If you jack up the drivers side of the vehicle by the fframe you can access all the plugs a little easier through the wheel well opening. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Posted on Feb 11, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a Sterring colum for my 1987 dodge ram 50, someone tried to steal it and busted the key itinial and I need the entire sterring colum.


You can order one through the dealership(pay a small fortune) or auto body shop. If your not worried about the color, call around to the junk yards, they may have one in a truck there. You can also check on-line at auto junk yards. cheaper than the shops, color is not a option there most times. hope this helps

Feb 23, 2011 | 1987 Dodge Ram 50

1 Answer

Where do i find the OBD2 fuse?


it sounds to me like its in the ignition switch. if it does it while u are driving take the sterring wheel and pull the tilt handle and lift it up and down. sometimes the wires in the sterring colum go bad and u have to replace the switch because the wires are about a foot long on them. im not compleatly sure so dont go tearing about ur sterring collum till u find out if thats what it is. but yeah try tilting the sterring wheel up and down when it does it and see it it makes a difference.

Nov 18, 2010 | 2007 GMC Sierra Classic 1500HD

1 Answer

Power sterring in 1992 toyota camry


oil level in tank too low so air getting into system,the pump not generating the pressure.the seals on the rams worn the steering colum plate which moves the pump activaters

Jun 26, 2010 | 1992 Toyota Camry V6

1 Answer

I put a new sterring colum in my 1998 dodge ram 1...


It is possible to plug the main connector in upside down. Check to see if this is what you did. Other than that, does the engine roll over?

May 21, 2010 | 1998 Dodge Ram 1500 4WD

1 Answer

How do you remove ignition switch on 1989 Ford bronco.


easiest way is to remove fuse panel cover, there are 2 9/16 bolts that hold the sterring coloum to the dash, remove them. coloum will drop down and allow easy access to the ignition switch. disconnect wire plug ( already having the battery disconnected of course) remove 2 nuts that secure it on to the colum and do reversal for install.

Mar 09, 2010 | 1989 Ford Bronco

2 Answers

1998 gmc truck 5.7 liter, I need to know the


Should be located above break peddel next to steering colume under dash.

Aug 30, 2009 | 1998 GMC Sierra

2 Answers

Stirring colum is locked


wiggle sterring column back and forth while turning key. You can also take shifter and wiggle up past park

Aug 27, 2009 | 1998 Pontiac Sunfire

1 Answer

2001 chevy 2500HD sterring colum


It should be Ok as long as the Replacement has the Same connections as the Old one.

Jan 18, 2009 | 1990 Chevrolet K1500

1 Answer

Location of flasher for my 1993 infiniti g20


what is it that you have to change your flasher? have you check the fuses that may fix your problem. now your flasher location is under your sterring colum by the fuse box

Jun 19, 2008 | Infiniti G Cars & Trucks

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...