Question about 2001 Ford Crown Victoria

2 Answers

Just found the problem, i have split in the part behind the alternator, can anyone tell me the name of the part?

Posted by on

  • 1 more comment 
  • Thomas Hornes Feb 10, 2012

    its a long flat piece look like its mount on top of the enigne and it has several wires coming from it, i want say its the intercoller but im guessing.

  • Thomas Hornes Feb 10, 2012

    i meant to say the intercooler but im guessing

  • Thomas Hornes Mar 06, 2012

    to all who offered to help me solve this I am very grateful and appreciative. I have since fixed the problem due to the assistance of you all. One of you hit the nail on the head. I can express to you all how gratifying it is to know people will help each other and not look for anything in return.

    Thank you and God Bless you all.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That would be the intake manifold if I'm not mistaken.

Posted on Mar 05, 2012

  • wimbish20003 Mar 05, 2012

    My guess is it probably is because I'm currently having the same problem. 2001 crown vics were the last year they used plastic intake manifolds before switching over to aluminum. Ford had a recall on this part about 7 years ago because they were cracking, but they won't do nothing for you now. Part needs to be replaced before it gets to bad, mine got bad and I had to fill the coolant with water about every 5 miles. I found the part online for about $170. My local parts store was asking $230. Hope this helps any.

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Ford Master
  • 286 Answers

Thats your voltage regulator

Posted on Feb 10, 2012

  • Thomas Hornes Feb 10, 2012

    joe its not that, i dont know the name of the part but it sits on top of the engine, its a long flat part with several things coming off of it and it looks like the fuel injection is connected to the back of it

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2012 genesis 8 cylinder alternator removal


you need a garage as you have to recover and disconnect the a/c refrigerant.

2010 alternator removal

then I found this

It's a little tricky.
I recently had to replace mine, it was still under warranty.

You don't have to removed any of the motor mounts.
A quick review of the process.

Release the pressure on the belt tensioner and remove
The belt around the alternator.
On the top left corner of the alternator you'll see a 10mm
Bolt bracket holding the alternator wires. Remove that 10mm bolt.
Then the alternator connector and power wire. A 12mm nut.
Then to remove the alternator you must remove the bracket which holds the alternator,
Which is the tricky part. The alternator has 2 14mm bolts holding it to the bracket, the bracket has 4 14mm bolts and
A 12mm bolt on the front. Two of the 14mm bolts are located behind the alternator.
Which means you would have to move the alternator toward the front of the car to reach the two bolts.
Then remove the bracket and alternator together. Then you would have to follow in reverse order to properly reach
Those 2 14mm behind the alternator.

It's going to seem like impossible especially your first time.
The Hyundai instruction just shows to remove the belt, under covers and the alternator. Literally.
I don't know where your located but I'm in Miami. If that's any help, we can do it together no issues.

Thread Need Help Does anyone have write up to replace alternator 2014...

remove alternator for 2012 4 6 genesis Google Search

Jul 25, 2017 | Cars & Trucks

1 Answer

2000 Mazda Protege lx. A phone charger tip broke, blew the fuse(s) for cigarette lighter, radio, and interior light. I checked and replaced mini fuse's in both interior and engine fuse boxes. Problem not...


There is an alternate problem with the wiring in the cigarette lighter where the wire melts and breaks. If you pull out the cigarette lighter assembly you will see a place where one wire splits into two. Find the damage point and replace the wire with a thicker one.

Feb 23, 2015 | 2000 Mazda Protege

1 Answer

Decoding engine casting


That is a 65-66 289 CID, So no that is not the right engine.

Feb 01, 2014 | Ford Focus Cars & Trucks

1 Answer

The EVAP sensor went bad in my 2008 Lincoln MKZ. The dealership wanted a ton to fix it so I just ordered the part. My husband is going to fix it. The problem is that the dealership said you have to take...


There are multiple names of EVAP sensors. There is an evap sensor on the fuel system and there is an evaporator coil on the at conditioner. The air conditioner is behind the dash, the other is in the engine compartment. If you know the code, post it in the comments.

Jul 26, 2017 | Cars & Trucks

2 Answers

While driving 1991 chevy cavalier gauges went wacko started cutting out lost charge in battery and died.Checked battery and alternator and both are fine.What should i check next?


Check all ground connectios first, make sure they are clean and tight, then check positive connections, use an ohm meter if possible. MAKE SURE YOU DIS-CONNECT THE BATTERY WHEN USING AN OHM METER.. Thanks Ray

May 28, 2011 | 1991 Chevrolet Cavalier

1 Answer

Hello my name is becca i have a 2000 hyundai accent it was fine one night the next day i went out to start it it wouldnt got a boost it started but once the ground cable was taken off it died in seconds...


Batteries sometimes die completely for no apparent reason even though they were working fine only hours beforehand. Try another / new battery and get the alternator fuse checked, because it should not be obviously split, and replaced if necessary because with the fuse out, the battery will not be recharged. The alternator charging rate appears to be OK but have it checked anyway.

Oct 29, 2010 | Hyundai Accent Cars & Trucks

1 Answer

Need a picture or schematic of battery to alternator wiring on a 1982 southwind motorhome with a 454 chevrolet engine


I can't give you a schematic but i can tell you where the wires should go;Battery post of the alternator should go to the center post of the battery splitter box that splits between the engine and the house.In the alternator plug the wire closest to the battery post of the alternator needs to go to the charge light or an ignition source.The other pin in the plug can just be looped the the battery post of the alternator.If you have no power to the alternator but do have power to the box that splits the power from vehicle to house the you need to put all the wires on the post marked batt until you can get a new one,this should get you up and running.If you are planing to remain camping with the temporary repairs made then separate the wires until you are ready to start the camper to prevent a dead battery condition if the house battery gets run down.Hope this helps.

Sep 16, 2010 | Chevrolet Chevy Cars & Trucks

1 Answer

Landrover discovery Td300 1998


the rev counter on the 300tdi disco takes its speed signal from a wire connected to the back of the alternator (single spade type connector) this wire usually breaks rewire and should be ok

cruise faults are usually caused by a vacuum pipe splitting check all the vac pipes to the cruise control actuator in the engine bay and at the brake pedal switch of end are split cut off and refit pipe

May 01, 2009 | 1998 Land Rover Discovery

1 Answer

Behind the crankshaft pulley the casing is cracked(split) leaking


Replace the cover behind pulley which requires removal of all accessories in the way,alternator,tensioner pulley,waterpump,and others.Belts,and possibly removing the motor.

Apr 09, 2009 | 1996 Plymouth Neon

1 Answer

Electrical. alternator fuse link keeps blowing


The wiring harness coming from the solonoid/power distribution has one small guage wire splitting into three different medium guage wires. I have ran into this problem quite often on mustangs, and what I have found that works is take the split out of it, and run all three wires with fusible links added to them straight from the solonoid

Jul 31, 2008 | 1989 Ford Mustang

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5579 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...