Question about 1991 Dodge Spirit

2 Answers

Turn signals? for a while the turn signals would delay real bad then after a while they dont even go on any more the hazards work the bulbs seem to be fine and the fuse to ? email me at oldavy15@aim.com i need help

Posted by on

  • 2 more comments 
  • davejones27 Oct 23, 2008

    thank you

  • davejones27 Oct 23, 2008

    and how much and where cant his be found how hard is it to do?



  • davejones27 Oct 23, 2008

    how do u fix where is it at how much?

  • Anonymous Dec 07, 2008

    that didnt work i tryed it the turn signals kinda come on kinda i mean it barely flickers but doesnt work

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need to kno about the blinker relay box so i can fix it

Posted on Dec 05, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

You need to have the blinker relay replaced.

Posted on Oct 23, 2008

  • fixyaixya
    fixyaixya Oct 24, 2008

    The relay should be under the dash in the relay block on the drivers side more than likely. You know that clicking sound that comes from the dash when the blinker is on? Normally that is where the sound is coming from.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 lesabre turn signals dont work wont even light up on the intrument panel but the 4 way flashers work


you have a bad turn signal flasher it looks like the hazard flasher but is a separate unit. its under the dash by the steering colume or fuse panel.

Aug 24, 2014 | Cars & Trucks

1 Answer

Hasards dont come on on a 2000 isuzu trooper


No need to panic-this can SEEM TO be caused by a couple of things, but it is fairly simple to determine exactly what is causing this flasher circuit condition.
First, turn on your flashers, however you have to do it, and walk around the truck to check that all bulbs are working (at least one on each corner). Turn signal and hazard flasher relays are thermal circuit interrupters and are current sensitive and will not work properly with too few or too many bulbs in the circuit. (This is usually a big problem when switching over to LED lamps, as LEDs only draw a fraction of the current that the bulbs do. This causes the relay to either not flash at all or flash very fast and triggers warning circuits on newer cars) If there is one or more bulbs out, they must be replaced.
That being said, I doubt that alone is your problem. Here is a general automotive wiring primer aimed at the turn signal, hazard, stop, and running lights on most all motor vehicles.
Hazard flashers are required by D.O.T. safety standards on all motor vehicles that may ever be used anywhere near a public road. They are also required to be able to be used without the ignition key. This means the flasher circuit for hazards is fed thru a fuse that connects straight to the battery and is energized at all times.
Turn signal circuits often share the same flasher relay as the Hazards, even though the power for them is switched through the ignition key. Power for directional blinkers connects to a fuse, then the ignition switch, then to the battery.
So, if you have to turn on the turn signals (is the key on?) to get hazards to work, that means they are not getting power direct from the battery, but can get it when the turn signals are on because they both use the same relay. This is usually the case on all vehicles; If 4-way flashers and turn signal are both on at once, the 4-ways override the turn signal and force all signal bulbs to flash. The turn signal never forces one side of the hazards to stop blinking.
So, where does that leave us? You simply have a blown fuse, my friend. The hazard lamps fuse may also power the cigarette lighter, dome light, or other "always on" accessories. This varies with make & model, but the Hazard Lps fuse is usually well marked in the fusebox. If the fuse blows again shortly after being installed, do not put in a larger one! Try one more. If it also blows immediately, there is a problem with the wiring, or a bulb could be in wrong and shorting to the socket ground. Try removing all the flasher bulbs and trying the switch(it won't flash or "tick-tock") again. If the fuse does not blow, you have found the problem. Good hunting!

Apr 15, 2013 | 2000 Isuzu Trooper

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

1 Answer

My right turn signal doesn't work at all on my 1998 ford explorer


Have you checked the r/f turn signal socket? Corrosion can build up in the socket causing high resistance in the circuit, not illuminating the bulb. Back probe the wires for the connector and make sure you don't have power before digging deeper into diagnostics. If you have power, make sure the other wire has a good ground.

Jun 19, 2010 | 1998 Ford Explorer

2 Answers

Turn signals dont flash on 95 firebird formula


There are dual elements bulb and single element bulb.

You need to see is there two contacts inside the socket.

If you accidentally put a single contact bulb into dual contact socket......it will cause this problem.

Check it out.


Jul 14, 2009 | 1996 Pontiac Firebird

2 Answers

1993 Dodge Shadow...left turn signal won't flash


If the fuses are good and the front and rear bulbs are good, change the flasher for the turn signals, even tho the right is working. If that doesn't fix the problem, it might be in the turn sgnal switch on the steering column.
If both bulbs are good for the backup lights and fuses are good, then the backup light switch, which is screwed into the side of the transmission has to bad.

Apr 12, 2009 | 1993 Dodge Shadow

1 Answer

Turn signals dont work headlights dont dim heater fan doesnt work


Did all these problems happen all at one time?? If so you may have a bad body ground. Try running a electrical wire from the (-) negative side of the battery to the body and see if this works. Be sure this wire is to a place with no paint as low voltage electricity will not flow through paint.
A). If not try replacing the turn signal flasher for the turn signal problem. This is usually the culprit and it's easiest and cheapest to replace. The turn signal flasher will be found under the driver side dash next to the hazard flasher. Turn the hazard flasher one to locate it. If you want try swapping the turn signal flasher with the hazard flasher to see if this fixes it. They are the same style flasher.
If this doesn't work you may a faulty turn signal switch or some wiring issues.
B). It could as simple as the head lights bulbs need to be replaced, it's rare but I have seen when both bulbs blew at or near the same time. If your able check the voltage at the head sockets.
C). Could be a bad blower motor or switch. I'm not sure if these models have a resistor block or not. The resister block controls the electrical current going to blower motor which controls the speed of the blower fan.

Jan 19, 2009 | 1992 Dodge Caravan

1 Answer

TURN SIGNAL IS SLOWER THAN OTHER CARS


change out flasher relay and see if it helps ..the one for signals not hazards

Dec 16, 2008 | 1996 Chevrolet Caprice

Not finding what you are looking for?
1991 Dodge Spirit Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...