Question about Kia Rio

2 Answers

1st and 5th gear jumps out of it's position. Revers gear do's not engage gear from time to time

It started with 1st gear now 5th gear is also jumping out of gear when pull away in first gear uphill and 5th gear when you travel at 100km/h

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I also have the same problem gear jumps away on the third gear a always replace that piece and it always destroy again

Posted on Sep 20, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 22,156 Answers

If this is a manual gearbox then its the indent springs in the selector rod movement inside the gearbox and this will involve removing the gearbox if i have correctly located the fault ,but without the make and model of vehicle i cannot say for certain as it could be the gearchange mechanism movement inside the cars cab and if tis cable then a outer sheaf on a cable could be loose and come out of its crimped holder

Posted on Feb 10, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

steve_baldam
  • 52 Answers

SOURCE: Gears change without a command from the driver.

There is a vacuum controlled selector valve on the selespeed alfa's it tricky to get at and expensive to replace. Have it sent to an alfa specialist or main dealer and they ll sort it

Posted on May 13, 2009

  • 548 Answers

SOURCE: the revers gear grinds when selecting. and jumps out of 1st gear

sounds like a synchro is going or you may just need a simple linkage adjustment either way id take to shop unless you are a transmission rebuilder?

Posted on Aug 24, 2009

  • 1810 Answers

SOURCE: Jumps out of 5th gear

syncro is a little round instead of square liped

1 too many grinders usually requires a rebuild of the trans or go to auto recyclers and get a new used trans

Posted on Jan 02, 2010

  • 1 Answer

SOURCE: 2008 a4 6 speed gearbox :- hard to engage 1st 2nd

I have had 3 gearboxes in my Audi A4 58 plate and it still jumps out of reverse. it always crunches going into second. Hop that helps.

Posted on Feb 14, 2010

  • 68 Answers

SOURCE: 99 ford escort jumps uot of 5th gear when you let

bad sincerizer will allways do it till you replace it .

Posted on Mar 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I have a 1998 Ford ranger 2.5L Manual Trans. My problem is I had to SHOVE it in to 1st gear to put off from a red light. Well something POPPED when I did it... Now its stuck it first gear..... The...


It sounds like the selector has jumped out of it slide in first gear so it is still engaged , , take the cover off the box and slide first gear back to neutral , check for damage to the gear stick and repair or it will happen again , refit the cover.

Apr 26, 2017 | Ford Cars & Trucks

1 Answer

1986 mazda 323Lx gears disappear


Sounds like you have worn gearbox selector linkages and I suggest that you get someone to take a look at them PRONTO.

Jan 19, 2013 | 1986 Mazda 323

2 Answers

Ford transmission wines in 1st 2nd 3rd revers, no


It is a 5 speed manual transmission? If it is noisey in all gears except for 4th, then the problem is countershaft bearings.

Apr 16, 2010 | 1995 Ford Aerostar

1 Answer

Jumps out of 5th gear


syncro is a little round instead of square liped

1 too many grinders usually requires a rebuild of the trans or go to auto recyclers and get a new used trans

Jan 02, 2010 | Ford Ranger Cars & Trucks

1 Answer

06 ford focus 5spd. no 1st, 3rd, or 5th gear.


It sound like the gear linkage isn,t set up right, you wouldn,t always be able to engage a gear unless you rocked the car.

Aug 25, 2009 | 2006 Ford Focus

1 Answer

Gears change without a command from the driver.


There is a vacuum controlled selector valve on the selespeed alfa's it tricky to get at and expensive to replace. Have it sent to an alfa specialist or main dealer and they ll sort it

May 05, 2009 | 2000 Alfa Romeo 156

1 Answer

Why does my 1993 Acura Integra pop out of 5th gear?


Only 2 thing cause this, worn engagement dogs on the gear pack or worn shifter parts or both, how many miles?

Nov 18, 2008 | 1993 Acura Integra Hatchback

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...