Question about 2003 Kia Sedona

Open Question

Oil pump timing mark position

My oil pump doesnt pump properly, where is the position of a timing mark of oil pump?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76164 Answers

SOURCE: oil pump mating mark position

The timing of the pump will not affect operation or pressure output.,

Posted on Feb 10, 2012

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing marks for an 03 mitsubishi lancer


the marks on the cam shafts are directly vertical at the top in line with a mark in the back of the housing the balance shaft timing mark is at 9 oclock position
the crank shaft timing mark is at 10 oclock position ( lining up with a pointer) and the oil pump mark is also at the 10 oc;ock position lining up with a pointer
( to check the position of the oil pump sprocket remove a plug -shown in the book -and insert .30dia pointed screw driver (5/16 philips ) to at least 2.4 "
if it cannot be inserted to this depth move the oil pump sprocket until it can)
the process of assembly is -:
install the timing belt to the sprockets and pulleys in the following order , retaining the belt to the camshaft sprockets by the use of suitable binding clips ( clothes pegs etc)
crankshaft sprocket
oil pump sprocket
guide pulley
exhaust camshaft sprocket
intake camshaft sprocket
tension pulley
to help install the belt the auto tensioner on the lh side should be removed
all of this information will be included in a workshop manual covering lancer engines for the years listed and will also include all tensions for the bolts --If you do not have the workshop manual then it is STRONGLY recommended that you obtain one
information from autodata belt installation manual lancer 2.0 l
2003-2007 engines

Oct 17, 2015 | 2003 Mitsubishi Lancer

1 Answer

What mark on the cam shaft/oil pump should be used to reset timing


If you can't find any information you may have to do it from scratch. Find tdc on crankshaft, find point where opposite cylinder to number 1 (cylinder 4 on inline 4 engine) is 'rocking' ( exhaust closing, inlet opening) at this point you are close, and should be able to find the correct mark. (probably need valve cover off to see cam and valves moving as you carefully turn camshaft) some engines have a balance shaft driven behind the oil pump. If so there will be marks to line up there too. Can be tricky, eg mitsubishi motor, just lining up oil pump mark may not be right, it's not a direct drive to balance shaft. A pin has to be able to insert into a bolt hole on the side of the block, so maybe have to turn oil pump gear up to 3 times to get right position. Sorry not familiar with your motor.

Jun 24, 2015 | Cars & Trucks

1 Answer

Oil pump mating mark position


The timing of the pump will not affect operation or pressure output.,

Feb 10, 2012 | 2003 Kia Sedona

1 Answer

I need timing marks on 2.2 toyota camry 2000


1. Remove the fan and generator V belt:
tdisline_542.jpg

tdisline_543.jpg 2. TIMING CHAIN (2az-FE Engine):
Before servicing the vehicle, refer to the Precautions Section.
Drain the engine oil.
Remove or disconnect the following:
Negative battery cable
Hood Right-side front wheel Engine under covers Right-side fender apron seal Front exhaust pipe Engine moving control rod and bracket Right-side engine mounting stay and bracket Accessory drive belt Engine appearance cover Engine wire Alternator Power steering pump, leave the hoses connected Ignition coils Ventilation hoses Cylinder head cover Turn the crankshaft pulley to set the No. 1 cylinder to TDC compression. Align the groove on the pulley with the timing mark -0- on the front cover. Remove the crankshaft pulley as follows:
1. TMC made: Use Special Tool 09213-54015 to hold the pulley to loosen the bolt. Use Special Tool 09950-50013 to remove the bolt and pulley.

2. TMMK made: Use Special Tool 09960-10010 to hold the pulley to remove the bolt. Use Special Tool 09950-40011 to remove the crankshaft pulley
tdisline_544.jpg Fig. Removing the crankshaft pulley-TMC-2.4L (2AZ-FE) engine
tdisline_545.jpg

Fig. Removing the crankshaft pulley-TMMK-2.4L (2AZ-FE) engine

Remove or disconnect the following:
Crankshaft position sensor Lower oil pan No. 1 chain tensioner Accessory drive belt tensioner

  • Support the engine with a suitable engine lifting device.
  • Remove or disconnect the following:
    Engine mounting insulators Right-side engine mounting bracket Stud bolt for the accessory drive belt tensioner from the block Front cover mounting bolts and nuts Front cover Crankshaft position sensor plate Timing chain tensioner slipper Timing chain vibration damper Timing chain Crankshaft timing sprocket
  • Turn the crankshaft counterclockwise by 90°, and align an adjusting hole of the oil pump driven sprocket with the groove of the oil pump.
    tdisline_546.jpg
  • Fig. Align the adjusting hole of the oil pump drive sprocket with the oil pump groove-2.4L (2AZ-FE) engine
    tdisline_551.jpg

    Fig. Insert a bar to lock the sprocket in position-2.4L (2AZ-FE) engine
    Put a bar in the adjusting hole of the oil pump driven sprocket to temporarily lock the sprocket in position. Remove the nut.

    Remove the bolt, chain tensioner and spring.

    Remove the chain tensioner, oil pump sprocket and No. 2 timing chain.

    To install:
    Set the crankshaft key into the left horizontal position. Turn the cutout of the drive shaft to the top

    tdisline_552.jpg

  • Fig. Align the crankshaft key and drive shaft cutout as shown for installation-2.4L (2AZ-FE) engine
    Align the yellow colored links with the timing marks of the sprocket as shown in the illustration.

  • Insert the sprockets with chain to the crankshaft and oil pump shaft.
  • Temporarily tighten the oil pump driven sprocket with the nut.
  • Insert the damper spring into the adjusting hole, and install the chain tensioner plate with the nut. Tighten to 9 ft. lbs. (12 Nm).
  • Align the adjusting hole of the oil pump driven sprocket with the groove of the oil pump.
  • Put a bar in the adjusting hole of the oil pump driven sprocket to temporarily lock the sprocket in position. Tighten the nut to 22 ft. lbs. (30 Nm).
  • Rotate the crankshaft counterclockwise by 90°, and align the crankshaft key to the top.
  • Install the timing chain vibration damper. Tighten to 80 inch lbs. (9 Nm).
  • Align the timing marks of the camshaft timing sprockets and bearing caps.
  • Using the crankshaft pulley bolt, turn the crankshaft and set the set key on the crankshaft upward.
  • Align the gold or orange colored link with the timing mark of the crankshaft timing sprocket.
  • Using Special Tool 09309-37010, tap in the sprocket.
  • Align the gold or yellow colored links with the timing marks of the camshaft timing gear and camshaft timing sprocket. Install the chain.
  • tdisline_553.jpg Fig. Align the marks of the sprockets and bearing caps to set the No. 1 cylinder at TDC-2.4L (2AZ-FE) engine
    tdisline_554.jpg Fig. Set the crankshaft set key facing upward-2.4L (2AZ-FE) engine
    tdisline_555.jpg Fig. Align the marked link of the timing chain with crankshaft sprocket timing mark-2.4L (2AZ-FE) engine
    tdisline_556.jpg Fig. Tap the crankshaft sprocket in with Special Tool 09309-37010-2.4L (2AZ-FE) engine
    tdisline_557.jpg Fig. Align the marked links of the timing chain with the camshaft sprockets during installation-2.4L (2AZ-FE) engine

    May 21, 2011 | Toyota Camry Cars & Trucks

    1 Answer

    How long and easy is it to rebuild oil pump on 94 grand caravan 3.8l


    Don't bother. Replace the unit.
    3.0 liter
    The oil pump assembly used on this engine is mounted at the front of the crankshaft. The oil pump also retains the crankshaft front oil seal.
    1. Remove the accessory drive belts.
    2. Remove the timing belt cover and timing belt. Refer to the timing belt removal and installation procedures in this section.
    3. Remove the crankshaft sprocket.
    4. Remove the oil pump mounting bolts (5), and remove oil pump assembly. Mark mounting bolts for proper installation during reassembly.

    To install:
    1. Clean the oil pump and engine block gasket surfaces thoroughly.
    2. Position a new gasket on pump assembly and install on cylinder block. Make sure correct length bolts are in proper locations and tighten all bolts to 10 ft. lbs. (14 Nm).
    3. Install the crankshaft sprocket and timing belt. Recheck engine timing marks.
    4. Install the timing belt covers. For more details, refer to the timing belt cover installation procedures.
    5. Install the accessory drive belts.
    6. Refill the crankcase and start the engine.
    7. Check for correct engine oil pressure and for any oil leakage.
    3.3 and 3.8 liter engines


    1. Disconnect the negative battery cable. Remove the dipstick.
    2. Raise the vehicle and support safely. Drain the oil and remove the oil pan.
    3. Remove the oil pickup.
    4. Remove the chain case cover.
    5. Disassemble the oil pump as required.

    To install:
    1. Assemble the pump. Tighten the cover screws to 10 ft. lbs. (14 Nm).
    2. Prime the oil pump by filling the rotor cavity with fresh oil and turning the rotors until oil comes out the pressure port. Repeat a few times until no air bubbles are present.
    3. Install the chain case cover.
    4. Clean out the oil pickup or replace as required. Replace the oil pickup O-ring and install the pickup to the pump.
    5. Install the oil pan.
    6. Install the dipstick. Fill the engine with the proper amount of oil.
    7. Connect the negative battery cable and check the oil pressure. Check for any oil leaks.
    for the 3.3 you can rebuild, 3.0 - replace.

    Feb 15, 2011 | 1994 Dodge Caravan

    1 Answer

    How to set the timing on 1998 GMC Sierra 5.7


    5.0L and 5.7L Engines To Remove:
    1. Remove the crankshaft balancer.
    2. Drain the cooling system.
    3. Remove the water pump.
    4. Drain the engine oil.
    5. Remove all engine oil pan fasteners except two nuts at rear of engine.
    6. Separate the engine oil pan from the front cover.
    7. Disconnect the crankshaft position (CKP) sensor wire. gm-03-50-845.gif

    8. Remove engine front cover. gm-03-50-849.gif

    9. Pry the oil seal from the front cover.
    10. Inspect the front cover seal area and crankshaft balancer seal area for damage. gm-03-50-846.gif

    11. Rotate the crankshaft until the timing marks on the crankshaft and the camshaft sprockets are aligned.
    12. Remove the crankshaft position sensor reluctor ring. gm-03-50-847.gif

      NOTE: Free play on the slack side of the camshaft timing chain must measure less than 0.43 inch (11Mm) or timing chain and sprockets must be replaced.
    13. Remove the camshaft sprocket bolts.
    14. Remove the camshaft sprocket.
    15. Remove the camshaft timing chain. NOTE: Do not turn the crankshaft assembly after the timing chain has been removed in order to prevent damage to the piston assemblies or the valves.
      gm-03-50-848.gif

    16. Remove the crankshaft sprocket using J 5825-A.
    17. Remove the crankshaft balancer woodruff keys (if required).
    To Install:
    gm-03-50-850.gif

    1. Install the crankshaft balancer woodruff keys into the crankshaft.
    2. Align the crankshaft sprocket keyway with the crankshaft balancer woodruff key. WARNING
      Wear eye protection when installing crankshaft sprocket.
      gm-03-50-851.gif

    3. Use J 5590 to install crankshaft sprocket.
    4. Install the camshaft sprocket and camshaft timing chain. 9308kg61.gif

    5. Ensure that the crankshaft sprocket alignment mark is in the 12 o'clock position and the camshaft sprocket alignment mark is at the 6 o'clock position.
    6. Install the camshaft sprocket bolts and tighten the camshaft sprocket bolts;
      • Torque to: 18 ft. lbs. (25 Nm)
    7. Install the crankshaft position sensor reluctor ring until completely seated against crankshaft sprocket. NOTE: The composite type engine front cover and seal must not be reused. Always install a new engine cover with a new seal.
    8. Install new engine front cover and bolts.
      • Torque bolts to: 106 in. lbs. (12 Nm)
    9. Clean sealer from corners of oil pan gasket where it meets the engine front cover. gm-03-50-775.gif

    10. Apply a 0.196 in (5 mm) bead of adhesive, GM P/N 12346141 or equivalent, 1.0 in (25 mm) long to the engine front cover to engine block junction.
    11. Install oil pan bolts.
      • Torque bolts to: 106 in. lbs. (12 Nm)
    12. Tighten oil pan nuts.
      • Torque bolts to: 18 ft. lbs. (25 Nm)
    13. Connect the crankshaft position sensor wire.
    14. Install the water pump.
    15. Install the crankshaft balancer.
    16. Fill the engine to the proper level with oil.
    17. Fill the engine to the proper level with coolant.
    18. Test drive the vehicle to confirm the repairs.

    Nov 05, 2010 | GMC K1500 Cars & Trucks

    1 Answer

    I have a 99 dodge intrepid that threw a rod and my father-in-law and I have been trying to time the car for a year now. We get number one piston up but the mark on the oil pump doesnt line up with the mark...


    I'm not sure what you may be "doing wrong", but here is the manufacturer procedure for aligning the timing marks.
    d753c93.gif
    98f82f3.gif
    ^Refer to this diagram during step 12.
    046beb2.gif
    ^Refer to this diagram during step 13.
    95add8f.gif
    ^Refer to this diagram for step 19.

    1. Align crankshaft sprocket timing mark to the mark on oil pump housing. NOTE: Lubricate timing chain and guides with engine oil before installation.
    2. Place left side primary chain sprocket onto the chain so that the timing mark is located in-between the two (plated) timing links.
    3. Lower the primary chain with left side sprocket through the left cylinder head opening. NOTE: The camshaft sprockets can be allowed to float on the camshaft hub during installation.
    4. Loosely position left side camshaft sprocket over camshaft hub.
    5. Align timing (plated) link to the crankshaft sprocket timing mark.
    6. Position primary chain onto water pump drive sprocket.
    7. Align right camshaft sprocket timing mark to the timing (plated) link on the timing chain and loosely position over camshaft hub.
    8. Verify that all chain timing (plated) links are properly aligned to the timing marks on all sprockets.
    9. Install left side lower chain guide and tensioner arm. Tighten attaching bolts to 28 Nm (250 in. lbs.). NOTE: Inspect oil ring on chain guide access plug before installing. Replace O-ring as necessary.
    10. Install chain guide access plug to left side cylinder head. Tighten plug to 20 Nm (15 ft. lbs.)
    11. NOTE:
    To reset the primary timing chain tensioner, engine oil will first need to be purged from the tensioner.
    12. Purge oil from timing chain tensioner using the following procedure:
    a) Place the check ball end of tensioner into the shallow end of Special Tool 8186.
    b) Using hand pressure, slowly depress tensioner until oil is purged from tensioner.
    13. Reset timing chain tensioner using the following procedure:
    a) Position cylinder plunger into the deeper end of Special Tool 8186.
    b) Apply a downward force until tensioner is reset. NOTE: If oil was not first purged from the tensioner, use slight finger pressure to assist the center arm pin of Special Tool 8186 to unseat the tensioner's check ball. CAUTION: Ensure the tensioner is properly reset. The tensioner body must bottom against the top edge of Special Tool 8186. Failure to properly perform the resetting procedure may cause tensioner jamming.
    14. Install the reset chain tensioner into the right cylinder head.
    15. Position tensioner retaining plate and tighten bolts to 12 Nm (105 in. lbs.).
    16. Starting at the right cylinder bank, insert a 3/8" square drive extension with a breaker bar into intake camshaft drive hub. Rotate camshaft until the camshaft hub aligns to the camshaft sprocket and damper attaching holes. Install the sprocket attaching bolts and tighten to 28 Nm (250 in. lbs.).
    17. Turn the left side camshaft by inserting a 3/8" square drive extension with a breaker bar into intake camshaft drive hub and rotate camshaft until the sprocket attaching bolts can be installed. Tighten sprocket bolts to 28 Nm (250 in. lbs.).
    18. Rotate engine slightly clockwise to remove timing chain slack, if necessary.
    19. To arm the timing chain tensioner: Use a flat bladed pry tool to gently pry tensioner arm towards the tensioner slightly. Then, release the tensioner arm. Verify the tensioner is armed (extends).
    20. Install the timing chain cover, crankshaft damper, and cylinder head covers.
    21. Install camshaft position sensor and connect electrical connector.

    Hope this helps!
    Mitchell

    May 16, 2009 | 1999 Dodge Intrepid

    3 Answers

    Oil pump is leaking on 1996 toyota camry, 2.2 lt


    Since your friend just replaced the timing belt, there wouldn't be a need to replace the oil pump O-ring and crankshaft seal unless they were leaking.

    No, you cannot get to the oil pump unless the crankshaft, lower timing belt cover and belt are removed.

    I have the same exact car with the same engine and just replaced the oil pump O-ring and crankshaft seal. I'm a good mechanic, but this is a tedious and time consuming job, but It can be done if you have good mechanic skills.


    VERY IMPORTANT.
    There is a big chance that the car's engine timing will be off, have someone who is knowledgeable to set the engine timing. If you don't and try to start the car, serious engine damage will probably occur.

    ALSO IMPORTANT.
    When you get the oil pump off removed all the old O-ring the new oil ring will not stay in place, I used petroleum jelly to keep the ring in place, it's perfectly safe and won't affect the operation of the oil pump.

    If your not sure you can do the repair yourself, take it to a mechanic.

    Mar 08, 2009 | 1996 Toyota Camry

    1 Answer

    How install timing belt 1993 1.8l eclipse


    See Figures 1, 2 and 3
    1. If possible, position the engine so the No. 1 piston is at TDC.
    2. Disconnect the negative battery cable.
    3. Remove the timing belt covers.
    4. Remove the timing (outer) belt tensioner and remove the outer timing belt.
    5. Remove the outer crankshaft sprocket and flange.
    6. Remove the silent shaft (inner) belt tensioner and remove the belt.
    0900c152800ad6b2.jpgFig. 1: Silent shaft belt timing marks-1.8L engine 0900c152800ad6b3.jpgFig. 2: Checking the silent shafts for proper positioning 0900c152800ad6b4.jpgFig. 3: Timing belt timing mark alignment-1.8L engineTo install:
    1. Align the timing marks of the silent shaft sprockets and the crankshaft sprocket with the timing marks on the front case. Wrap the timing belt around the sprockets so there is no slack in the upper span of the belt and the timing marks are still aligned.
    2. Install the tensioner pulley and move the pulley by hand so the long side of the belt deflects about 1/4in.
    3. Hold the pulley tightly so the pulley cannot rotate when the bolt is tigthened. Tighten the bolt to 15 ft. lbs. (20 Nm) and recheck the deflection amount.
    4. Install the timing belt tensioner fully toward the water pump and tighten the bolts. Place the upper end of the spring against the water pump body.
    5. Align the timing marks of the camshaft, crankshaft and oil pump sprockets with their corresponding marks on the front case or rear cover.
    There is a possibility to align all timing marks and have the oil pump sprocket and silent shaft out of time, causing an engine vibration during operation. If the following step is not followed exactly, there is a 50 percent chance that the silent shaft alignment will be 180 degrees off.
    1. Before installing the timing belt, ensure that the left side (rear) silent shaft (oil pump sprocket) is in the correct position as follows:
      1. Remove the plug from the rear side of the block and insert a tool with shaft diameter of 0.31 in. (8mm) into the hole.
      2. With the timing marks still aligned, the shaft of the tool must be able to go in at least 2 1/2 in. If the tool can only go in about 1 in., the shaft is not in the correct orientation and will cause a vibration during engine operation. Remove the tool from the hole and turn the oil pump sprocket 1 complete revolution. Realign the timing marks and insert the tool. The shaft of the tool must go in at least 2 1/3 in.
      3. Recheck and realign the timing mark.
      4. Leave the tool in place to hold the silent shaft while continuing.
    2. Install the belt to the crankshaft sprocket, oil pump sprocket, then camshaft sprocket, in that order. While doing so, make sure there is no slack between the sprocket except where the tensioner is installed.
    3. Recheck the timing marks' alignment. If all are aligned, loosen the tensioner mounting bolt and allow the tensioner to apply tension to the belt.
    4. Remove the tool that is holding the silent shaft and rotate the crankshaft a distance equal to 2 teeth on the camshaft sprocket. This will allow the tensioner to automatically apply the proper tension on the belt. Do not manually overtigthen the belt or it will howl.
    5. Tigthen the lower mounting bolt first, then the upper spacer bolt.
    6. To verify correct belt tension, check that the deflection at the longest span of the belt is about 1/2in.
    7. Install the timing belt covers and all related items.
    8. Connect the negative battery cable.

    Jan 21, 2009 | 1993 Mitsubishi Eclipse

    Not finding what you are looking for?
    2003 Kia Sedona Logo

    Related Topics:

    34 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kia Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8273 Answers

    Are you a Kia Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...