Question about Cars & Trucks

Open Question

My sno way plow wont stay up the down silonoid is always magnatized

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 844 Answers

SOURCE: i have a 2003 f-250 with a curtis sno-pro 3000

I think you have a problem with the plow motor grounding out. when you raise or turn plow in either direction you have to run the plow motor which is grounded out. ( as in hooking the ground and positive together directly ) the plow is on a gravity drop when you let it down by the weight itself and does not require the motor for the plow to operate. It's your plow motor or the positive feed to selonoids.

Posted on Feb 05, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO GET WESTERN SNOW PLOW TO GO LEFT AND RIGHT


Hydraulic fluid doesn't really freeze. When it does, we wouldn't be around to see it. You need to go threw electrical. Go to there web site and see if you can get a diagram for it. Old systems are fairly easy to go threw. Newer ones have PC boards. Older ones, the stick/switches go bad first. But it always wise to loosen, then tighten the nuts that hold wires first. Corrosion sets in because it isn't used for so long.

Dec 18, 2016 | Cars & Trucks

1 Answer

Sno-way plow wont lift withouy help it lifted good a few times than it wont with help


problem in the pump or pump relief valve
problem in the ram seal allowing the pressure to by pas the piston

Nov 25, 2015 | Cars & Trucks

1 Answer

Plow doesn't always go down


Did you try angling in both directions? If the blade is angled all the way to one side (most likely to the LEFT), it could be that the valves are stuck directing fluid in that specific direction. Check that you are getting power to your "B" solenoid when you are trying to lift the blade, and power to the "C" solenoid when you are trying to angle in one direction but not the other.

Mar 03, 2015 | Cars & Trucks

1 Answer

My fisher minuteman 2 plow will go up and left and right but will not go down


Most of those systems don't have a driven retraction on the piston. It is gravity feed back. There is a valve that is sticking or out of adjustment. http://library.fisherplows.com/?cat=38

Jan 24, 2015 | Cars & Trucks

1 Answer

Accidently crossed jumper cables on my 95 buick lesabre has power but wont click or turn over


does that have a silonoid on the starter or seperate from the starter? either way i would test the silonoid. i usually take a screw driver an touch it post to post on the. make sure to keep your hand on the handle an not on the metal because you might get shocked. usually when a vehicle wont turn over but clicks its the starter but if it doesnt click then its the silonoid. hope this helps.

Jan 05, 2013 | 1995 Buick LeSabre

1 Answer

I have a 2003 f-250 with a curtis sno-pro 3000 hitch n run plow system. when i go to lift plow or go left or right it kills the truck. the light shut off and every thing else as soon as i hit any of the...


I think you have a problem with the plow motor grounding out. when you raise or turn plow in either direction you have to run the plow motor which is grounded out. ( as in hooking the ground and positive together directly ) the plow is on a gravity drop when you let it down by the weight itself and does not require the motor for the plow to operate. It's your plow motor or the positive feed to selonoids.

Feb 05, 2011 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Wont turn over


check the conections of the wires at the starter and silonoid disconect battery first as to not short anything out by bumping the engine wich is grounded if all conections are good then the bendex in the silonoid is not engaging all the way to operate the starter or the broshes in the starter ar woren out eather way just replace the starter a new one comes with the silonoid on it and they are only about 45-65 bucks at schucks and have a 1 year warranty. i dont recomend just replacing the silonoid on the starter cause adventuly you will have to replace the starter any ways. or if you are on a budget then u can remove the silonoid from the starter and sand the bendex in the silonoid with some fine grit sand paper and use air to blow any debres out of it and reinstall silonoid and it will get u by for a short time.

Aug 01, 2009 | 1998 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...