Question about 1998 Chevrolet Camaro

Open Question

Location of oil pump on 1998 camaro 3800 - 1998 Chevrolet Camaro

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: low oil or no pressure

Are you sure it's your oil pump and not just a faulty oil sensor. Don't know if you have a V6 or a V8 so can't really help you more on where the sensor's are.
note: you get your oil pressure from the crankshaft and the oil pump really brings the oil to the top of the engine to keep it simple. 
Good luck and hope this keeps it really simple and save's you money.

Posted on Apr 09, 2009

Ad
  • 6982 Answers

SOURCE: tps location on 1999 camaro

TPS is always connected to one end of the throttle plate shaft It should not be difficult to identify. If you already have the new one the old one is identical. Usually fastened with two small torx screws.

Posted on Apr 09, 2009

  • 921 Answers

SOURCE: how do you install coil pack on 98 camaro v6 3800

#1 disconnect neg. bat cable. #2 unplug both leads from the coil your changing. #3 remove both mounting screws and pull up and remove on it to remove it...reverse to install. be careful when removing the screws they're small and you dont want to drop them. hope this helps.

Posted on Apr 29, 2010

  • 1455 Answers

SOURCE: were is the oil pump located on 1991 chevy camaro

It is located on the bottom of the engine, inside the oil pan.

Posted on Sep 22, 2010

bluesman1956
  • 388 Answers

SOURCE: 2001 camaro 3800 eng. when

When the engine and oil are cold it will show a high pressure because of the viscosity of the oil. When it warms up the oil is thinner. If it doesn't drop below 20-25 psi at warm idle I wouldn't worry about it as that is normal.

Posted on Feb 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does bcm control fuel pump on 3800 2 series five speed camaro 19996


The security system does and so does the oil pressure sender.

Nov 29, 2016 | 1996 Chevrolet Camaro

1 Answer

What do I have to do to get better clearence on my oil pan for my 3.8v6 3800 Chevy camaro 1998


Is your car 100% stock? if so you shouldn't have a problem. If you altered something like lowered suspension or different wheels tires you created your own problem. Put it back to stock! I know you didn't want to hear that. If you scrape off the oil pan you probably will loose the engine.

Feb 28, 2015 | 1998 Chevrolet Camaro

1 Answer

2000 camero leak is this a better video? 3800 series 2 v6


Hopefully what you have shown is behind the water pump and the leak is water and not oil. If it is water you need to replace the water pump and its seal, if not, the engine will require much more detailed tear down. Get yourself a Haynes repair manual for your 2000 Camaro V6 at your local auto parts store and check out the engine parts locations.

Jan 22, 2013 | Cars & Trucks

1 Answer

How difficult is it to change the oil pump in a 1998 camaro(3800 V6)?


Should be inside the timing cover. You remove the timing cover to access the pump parts. Not really a pump assembly like pumps mounted inside oil pans.
I doubt the pump is faulty.
Have you checked the oil pressure with a mechanical gauge ?

Dec 18, 2012 | 1998 Chevrolet Camaro

1 Answer

2001 camaro 3800 eng. when eng is cold oil pressure is high after warms up oil pressure drop very low at idle. why??


When the engine and oil are cold it will show a high pressure because of the viscosity of the oil. When it warms up the oil is thinner. If it doesn't drop below 20-25 psi at warm idle I wouldn't worry about it as that is normal.

Feb 07, 2011 | 2001 Chevrolet Camaro

1 Answer

Were is the fuel pump reset switch located


I curently have a 1998 camaro sitting on my lot waiting for a new fuel pump, check your electrical systems and make sure there are no electrical codes.

Feb 05, 2011 | 1998 Chevrolet Camaro

1 Answer

How do you install coil pack on 98 camaro v6 3800


#1 disconnect neg. bat cable. #2 unplug both leads from the coil your changing. #3 remove both mounting screws and pull up and remove on it to remove it...reverse to install. be careful when removing the screws they're small and you dont want to drop them. hope this helps.

Apr 29, 2010 | 1998 Chevrolet Camaro

2 Answers

I need to change the gasiline pump the camaro 1998


the fuel pump is located inside the gas tank. it must be empty and dropped down to access the pump

Feb 06, 2010 | 1998 Chevrolet Camaro

1 Answer

Low oil or no pressure


Are you sure it's your oil pump and not just a faulty oil sensor. Don't know if you have a V6 or a V8 so can't really help you more on where the sensor's are.
note: you get your oil pressure from the crankshaft and the oil pump really brings the oil to the top of the engine to keep it simple. 
Good luck and hope this keeps it really simple and save's you money.

Apr 09, 2009 | 1998 Chevrolet Camaro

Not finding what you are looking for?
1998 Chevrolet Camaro Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...