Question about 1992 Dodge Dakota

1 Answer

No turn signals or brake lights on my 1992 dakota

Replaced flasher and seems no burnt out lights or fuzes??????????????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this same problem and had to replace the sockets for the lights. They were all rusted out and either not making connection or shorting.

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 Dakota brake lights work running lights don't. What's the problem there?


Hi Nate:
They are on a different circuit.
Brakes, signals, and emergency flashers are typically on one circuit.
The running lights are usually controlled by the same switch as your headlights. Check the function of the switch, and also for any disconnected wires. Double check your fuses.
Hope this helps.

Mar 28, 2015 | 1992 Dodge Dakota

2 Answers

What would cause the turn signals to work sometimes and sometimes not ?


A bad flasher relay would do that. They are usually located on the fuse panel and plug into it.

Jun 27, 2014 | 1992 Ford Tempo

2 Answers

Is there a fuse for the turn signals? hazards works ok but the turn signal only the light comes on.


Should be two flasher relays.Easiest way to find them is to turn flashers on and find where the clicking is coming from. They are usually within a few inches of each other.Once you find them both remove the one for the hazard flashers and install it in place of the one for turn signals.If this corrects your issue you will need to purchase another flasher relay.

Jul 20, 2010 | 1992 Dodge Dakota

1 Answer

Need radio fuse location for 1992 Dakota,


Hello,
You will have a fuse box cluster under the dash of the Dakota. Its under the steering column, over near where the e-brake is, the fuzes are labeled either on the back of the box or on the front where the fuze amperages are. I blew a fuze in mine. Just, clip it down from the dash, or look up under, it says radio and there you go, just pull it out and replace with the same amperage fuze and your good to go... Hope this helps.
-Steve

Nov 30, 2009 | 1992 Dodge Dakota

3 Answers

Hazard flashers do not work. Turn signals do. Changed relay. Nothing. Ugh. 1992 oldsmobile cutlass supreme


You changed the hazard flasher or the turn signal flasher? It has two, one for the hazard and one for the turn signals

Aug 31, 2009 | 1992 Oldsmobile Cutlass Supreme

1 Answer

1997 dodge dakota signal/hazard problem


This vehicle has what is known as a flasher unit, it is a relay assembly under the dash. This is the relay that clicks when your signals are on. it may need to be replaced. Another possible trouble spot could be the wiring in the steering column. Are there any other issues with horn, cruise etc.
Check the flasher first and get back to me.

Dec 06, 2008 | 1997 Dodge Dakota

Not finding what you are looking for?
1992 Dodge Dakota Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...