Question about 1997 Ford Explorer AWD
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did you check the fuel inertia switch in the passenger side kick panel ?
The fuel pump is powered :
the fuse to the fuel pump relay.
The fuel pump relay to the fuel inertia switch
The fuel inertia switch to the fuel pump itself.
At the fuel inertia switch in the kick panel, power from the relay is the Dark Green w/ Yellow stripe wire and the pink w/ black stripe wire is the power. from the fuel inertia switch to the fuel pump.
If you jumper the fuel pump relay, you should hear it run. If not pull the fuel pump relay, and check the pins in the relay socket, pin 30 should be the power from the fuse.
If you have power at pin #30, jumper the relay socket as shown with the red line above, and check the dark green w/ yellow stripe wire at the fuel inertia switch for power.
Press the button on the top of the fuel inertia switch, and check for power leaving the fuel inertia switch on the pink w/ black stripe wire.
This is tests good, check for power at the fuel pump, same pink w/ black stripe wire.
Fuel inertia switch info is in the owners manual, If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
Posted on Jan 03, 2010
if you replaced fuel pump i would look at backward wiring when replaced and i would start at the source of work if your vehicle was working fine before replacement then 9 out of 10 it will be your fuel pump wireing
sometimes when putting wireing back together the connectors have the missing clip and in turn you can turn the wireing in both directions now where positive is touching the ground on both sides of connector kris kross problem check your work this is crucial use a test light to find the right wires where they go
Posted on May 26, 2008
Tips for a great answer:
Feb 09, 2017 | 2003 Ford Explorer
Oct 21, 2016 | 2003 Ford Explorer
May 14, 2012 | 1997 Ford Explorer AWD
Apr 09, 2011 | 1997 Ford Taurus
Apr 13, 2010 | 1999 Ford Explorer
Mar 24, 2010 | 1997 Ford Explorer AWD
Jan 12, 2010 | 1997 Ford Explorer AWD
Oct 28, 2009 | 2003 Ford Explorer Sport
Oct 10, 2009 | 1997 Ford Explorer AWD
Aug 11, 2009 | 1997 Ford Explorer AWD
1,021 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: