Question about 2002 Isuzu Rodeo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The best way to do it is to unbolt the engine mounts and lightly lift the engine from below with your floor jack and a piece of wood. Trust me, that the only way I could get it out. 3 Hours to get it out, 10 minutes to get the new one in place.
Posted on Mar 27, 2009
pull the starter away from the bellhousing and turn the drive end upwards then it will come out from the engine compartment tight i know but i have just done mine so i know it will come
Posted on Mar 30, 2009
SOURCE: 2000 isuzu Rodeo wont start
Could be your neutral safety switch, or it's not all the way in park. Broken or loose wires in the starting circuit. Inspect all wires and connectors at the battery, starter solenoid, and ignition switch. Or your starter pinion is jammed in the ring gear. Remove starter and inspect. Last but not least, your engine is seized. You don't want that one. Good luck.
Posted on May 22, 2009
SOURCE: 2002 isuzu rodeo won't start
Look under the dash at the clutch pedal. Should be a switch or a button hidden under there near the top of the pedal. Pull the connector off and put a large paper clip in it, or a short piece of wire, and try the starter. If it doesn't work then check the starter fuse and relay. Just swap the starter relay out with something that you know works like the AC or Fuel pump and see if it starts. If all else fails then it could be the ignition switch itself.
Posted on Jul 13, 2009
This guy left a lot out. First you must remove 3 nuts that connect the exaust to the manifold. Next you must remove the nut and bolt at the first union. Now you can remove the starter and reinstall a new one. Now just attach the exaust and problem solved.
Posted on Sep 08, 2009
Tips for a great answer:
Oct 30, 2015 | Isuzu Rodeo Cars & Trucks
Oct 30, 2015 | 2002 Isuzu Rodeo
Aug 21, 2014 | 2000 Isuzu Rodeo
Sep 10, 2012 | 2002 Isuzu Rodeo
Jul 09, 2011 | 2002 Isuzu Rodeo
Dec 28, 2010 | 2002 Isuzu Rodeo
Jul 13, 2009 | 2002 Isuzu Rodeo
61 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: