Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: audi a3 1.8t dump valve fitting
A dump valve replaces the recirc valve. Did you see the reply to your prior post on this topic that I put up the other day? You can do it but it'll cost you your catalytic converter and O2 sensors - that has been proven out many times in the past. If you don't care about that and don't mind spending $1200-1500 every year or 18 months to replace those parts, then go to www.audiworld.com or www.audidiy.com and look in the tech areas - there are step by step procedures there that walk you through recirc valve replacment. They'll show you how to fit an aftermarket recirc valve, but you can follow that procedure to do a BOV as well.
Seriously though, as I said before, some cars are fine with BOVs but Audis are not. You're going to cost yourself a LOT of money just for the sneeze sound and slightly slower turbo spool. Your car and money though so it's your decision.
Posted on Oct 19, 2008
SOURCE: The LCD trip, LCD clock,
you have to have the clocks repaired . a second hand set fom another vehicle will result in your car not starting ;-( your imobilisers are built in to your clocks
Posted on May 15, 2009
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
Posted on Oct 30, 2009
Tips for a great answer:
Jun 30, 2012 | 2008 Audi A3 S Line Hatchback
Aug 29, 2011 | Audi A3 Cars & Trucks
May 20, 2011 | 2005 Audi A3
Apr 01, 2011 | 2008 Audi A3
Jan 27, 2011 | 2005 Audi A3
May 16, 2010 | 2005 Audi A3
Apr 07, 2010 | 2005 Audi A3
Aug 11, 2009 | Audi A3 Cars & Trucks
Nov 04, 2008 | Audi A3 Cars & Trucks
Sep 25, 2017 | Suzuki Cars & Trucks
29 people viewed this question
Usually answered in minutes!