Question about 1993 Toyota Paseo
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: thermostat location
The thermostat is located directly under the distributor cap, on the end of the cylinder head. Easy to remove/replace. Drain the coolant, remove the 2 nuts that holds the housing on, and remove it. The thermostat stays in the cyl head, just pull it out. Note that the "Wiggle-Valve" must be placed at the 12 oclock/straight up position. Hope this helps, in lieu of a picture.
Thanks for choosing FixYa!
Posted on Nov 25, 2008
You don't need to.You need to put new contacts in the starter solenoid switch,just take the three 8mm bolts out of the solenoid cover and pull out the plunger and you will see what i'm talking about,the car has no relaly for the starter.
Posted on Nov 07, 2009
Testimonial: "Hey to wrirguy212 Thanks for your time! I am needing more details. starter/solenoid bench test good. parts store lists a starter relay mounted on fw"
you could remove the instrument cluster from the dash and unplug / remove the light, or go the easy way and use a piece of electrical tape and cover it. as far as disabling it I would think the only way would be to reprogram your ECM
Posted on Apr 22, 2010
Tips for a great answer:
Jan 07, 2016 | Toyota Cars & Trucks
yea i'd say check your idle air control valve.
Aug 03, 2012 | 1993 Toyota Paseo
Dec 16, 2010 | 1993 Toyota Paseo
Nov 23, 2010 | 1993 Toyota Paseo
May 17, 2010 | 1994 Toyota Paseo
Jan 15, 2010 | 1993 Toyota Paseo
Nov 06, 2009 | 1993 Toyota Paseo
Mar 29, 2009 | 1993 Toyota Paseo
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: