Question about 1998 Ford Expedition
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 ford expedition 4x4 not
Today I fixed the vacuum lines to the front differential (nee transaxle). I had trouble finding parts in the local auto store that would do the trick - but I got something cobbled together. Based on my experience, I can go back to the store and get the right parts for a proper fit.
As of now, 4WD will engage but will not disengage - clearly one of the connections is still poor, or I accidentally switched the ports, or the vacuum shift motor (attached to the front differential) is shot (obviously from abuse).
As near as I can tell, once I switch into 4WD-HI, it will not shut off. 4WD-LO will engage and disengage properly. If I turn the car off for a while, a couple of times 4WD has disengaged. Hmmm...
Posted on Jan 15, 2009
SOURCE: I have a 97 ford expedition 5.4 liter 4x4 that will start but won't continue to run. i have changed out the pump and it still acts as though it is fuel starved. I had just changed the oil and ran it
have you checked for vacuum leaks? thought mine was spark plugs and found broken vacuum hose attatchment behind throttle body to manifold was broken... that was my problem, maybe yours too? It's the hose just behind throttle body on passenger side- mine was a broken rubber elbow right at top of manifold- it's reachable without taking throttle body off...
Posted on Jul 13, 2009
Removal & Installation
1. Disconnect the negative battery cable.
2. Relieve the fuel pressure.
3. Raise and support the vehicle.
4. Remove the fuel tank; refer to the procedure outline in this section.
5. Remove the fuel pump retaining bolts.
6. Remove the fuel pump.
7. Thoroughly clean the fuel pump-mounting flange.
8. Install a new gasket and place the pump into the tank.
9. Ensure that the fuel tubes face toward the fuel rail and tighten the retaining bolts to 80-107 inch lbs. (9-12 Nm).
10. Install the tank as outlined in this section.
11. Tighten the fuel tank bolts to 66-91 inch lbs. (7.6-10.4 Nm).
12. Tighten the fuel tank straps bolts to 22-30 ft. lbs. (29.7-40.7 Nm).
13. Tighten the skid plate bolts to 9.3-12.7 ft. lbs. (12.7-17.3 Nm).
14. Connect the negative battery.
Posted on Dec 20, 2009
Tips for a great answer:
Apr 17, 2017 | Ford Cars & Trucks
Feb 09, 2011 | 2000 Ford Expedition
Oct 10, 2010 | 2000 Ford Expedition
Jun 12, 2010 | 1998 Ford Expedition
Mar 29, 2009 | 1998 Ford Expedition
Feb 22, 2009 | 2000 Ford Expedition
Jan 10, 2009 | 1998 Ford Expedition
78 people viewed this question
Usually answered in minutes!