Question about 2003 Nissan Sentra

2 Answers

2003 sentra 1.8 while hot car stalls

Code 335 appears,changed crank sensor but still same problem

Posted by on

  • vickster3030 Dec 12, 2008

    I also changed the crank sensor-that was the code that came up when I had the car scanned. It seems to have a low idle and the service engine soon light just came back on! Now what?? This car only has 69k on it???

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Actually turned out to be the crank position sensor AND the cam position sensor-had both replaced and now-wow, no more stalling @ 40 to 50 mph. I can finally drive in the left lane and/or roads without a shoulder to pull over on!!!

Posted on Dec 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

I can tell you what code p0335 is :
Turbocharger Boost Sensor A Circuit Malfunction.

Posted on Oct 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Hyundai Sonata 2.4l auto went dead while driving the other day and now cranks but will not start. trouble code lists P0335


Code 335 is for a problem with the crank sensor circuit.
It could be a faulty sensor or something in the wiring harness.

Feb 09, 2013 | Cars & Trucks

1 Answer

What's code po 335 on a 2006 nissan 350z


Code 335 is for a problem with the crank sensor. It could be a faulty sensor, the object the sensor reads, or the wiring from the sensor back to the computer.

Sep 27, 2012 | Cars & Trucks

1 Answer

Had bad ignition coil replaced in Nissan Sentra 2001. Error code 300 and 335 were prevalent. After replacement had Camshaft Sensor replaced, still get error code 335. Thinking maybe one more ignition coil...


please have a test performed to confirm the integrity of your head gasket. this era of these cars were prone to failure, causing coolant to leak into the cylinder thus a misfire. it is typically most noticeable on a cold start, and can cause long cranking times, as well as a rough idle when first started. good luck!

Jul 07, 2010 | 2001 Nissan Sentra

2 Answers

I have a 2003 Nissan Sentra SE-R and the engine keeps sputtering while i am driving and the diagnostic pulled the P0335 code indicating that my CKP is malfunctioning but i just replaced it and it is doing...


Note - not a solution..just adding my woes!
I drive a 2003 Nissan Sentra SE-R Spec V.
My car suddenly stalled 1 day and the engine wouldn\'t turn over. Brought it to my mechanic and had the Camshaft position sensor replaced by my mechanic. The car ran fine for about 2 weeks and then the light was back on with the initial symptoms.

Took the car into the dealership and they diagnosed it again as P0335. Said that the mechanic hadn\'t installed the sensor correctly. Charged me a bunch of money to replace the thing and not too long ago the check engine light is on. The Revs bounce around everywhere. Checked the code again and it\'s P0335 yet again! Am in talks with the dealership to get to the bottom of this...

Apr 19, 2010 | 2003 Nissan Sentra

1 Answer

Had mass air sensor and coolant temp senso replaced and codes erased but vehicle still stalls. Oil light appears but leaves once car is taking off and it stalls again


Codes ? When does it stall? When hot? How long will it run after you crank it up cold? More info, Once it stalls does it crank right back up?

Aug 17, 2009 | 1995 Buick LeSabre

1 Answer

2003 Cuts off when hot, will not start untill cool


My 2003 nissan sentra would get hot and stall out even in middle of highway doing 70 mph. The guages would go up and down. Would not start up all the time after stalling. had to cool down first. Nissan said it was head gasket, and wanted to charge 1000.00 for the job. I took to local dealer who charged me 550.00. Works fine ever since. Nissan dealer said they do like 3 head gaskets a week on the sentras. They have crappy ones in original parts. They have not recalled though.

Jul 10, 2009 | 2003 Nissan Sentra

1 Answer

2002 Nissan Sentra Loses Power


SERVICE IT .....OIL PLUGS, AIR ,FUEL AND OIL FILTERS GET TROTTLE SENCOR AND THE MASS AIR FLOW SENCOR CHECKED

Jun 29, 2009 | 2003 Nissan Sentra

1 Answer

P0335 CRANK POSITION SENSOR A CIRCUIT MALFUNTION


crank sensors are usually located in/near the distributor.

Jun 07, 2009 | 2003 Nissan Sentra

1 Answer

Hello


After the new sensors are installed and the code still comes back, replace the timing chain. They have been known to stretch and cause the P0335 code on these engines.

Nov 25, 2008 | 2003 Nissan Sentra

Not finding what you are looking for?
2003 Nissan Sentra Logo

Related Topics:

567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...