Question about 2001 Dodge Ram 1500 Truck 2WD
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You are experiencing what is called a CCD Bus short in the instrument cluster circuit board. (chrysler calls it the "chrysler collision detection buss) it is how all of the controllers and modules communicate on that vehicle. Get a new one and you should have no problems, and used ones are a HUGE gamble. Other vehicles that are extremely bad for this are, caravans, neons, sebring coupe/conv, strates, and cirrus. It will also cause a no start condition that is EXTREMELY hard to catch.
Posted on Nov 22, 2008
Heryou go its a pretty lengthy diagnostic procedure it appears there is a power problem with the instrument cluster here is the code meaning hope it helps have a good dayDB
Posted on Feb 19, 2009
P0442 means you have a small leak in your EVAP System. your can try replacing the Gas cap since it's the easiest thing to do and reset the check engine light with a scanner. If the check engine light came back on then your going to have to go though all the Vacuum line in the EVAP system and connections. The other thing too is the service engine light should turn off when the problem is addressed and it may take up to three start ups to clear. Good luck and keep me posted, be glad to help, Recap, change the gas cap and inspect all the hose and connection's to the EVAP system.
Posted on Jun 08, 2009
123 is TP sensor , 455 is leak in evap system, quite often bad gas cap seal or not on tight, if not that, check all hoses to evap canister & purge solenoid for possible leak. 1596 is speed control switch malfunction. If vehicle not experiencing any driveability problem, I would disconnect battery for a few seconds to erase codes, then drive it for a while & see if they come back.
Posted on Jul 06, 2009
The P1596 is Speed Control Switch Always High and P0420 is Catalyst Efficiency Below Normal (Bank 1) and try taking the positive cable off battery for ten minutes and see if that doesn't help that way it will reset the computer and may just drop them codes.
Posted on Jun 22, 2010
Tips for a great answer:
Jun 14, 2012 | 2001 Dodge Ram 2500 Truck
May 11, 2012 | 2001 Dodge Dakota
Jan 06, 2011 | 2004 Dodge Ram 1500
Feb 07, 2010 | 2001 Dodge Ram 3500 Truck
Nov 22, 2009 | 1996 Dodge Ram 2500 Club Cab
Aug 27, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Jul 06, 2009 | 2001 Dodge Dakota
Jun 02, 2009 | 2001 Dodge Ram 1500 Truck 2WD
Aug 10, 2008 | 2001 Dodge Ram 3500 Truck
Jan 23, 2016 | 2001 Dodge Ram 1500 Truck 2WD
270 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: