Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The switch is poorly designed. I disassembled the switch assembly and removed the pushbuttons that actually activate the switches. You can then press the switches directly with your finger. However, you lose the symbols that identify the switches and you will see the greenish lights that backlight the pushbutton symbols. I made some stick-on labels for the dashboard and didn't have to get a new switch assembly. Since the headlights are activated automatically by the dashboard sensor, I rarely use the switch anyway.
Posted on Nov 05, 2008
SOURCE: 2000 Buick LeSabre Struts
Yes there are struts on the front and shocks on the back. 2 of each. They are around $50-100 for the fronts. $30-100 for the rears depending if the car has air ride or not.
Posted on Nov 08, 2008
Disconnect your negative battery cable. Locate and remove
the screws that hold your interior door handles in place (they may be hidden by
snap in, or snap on clips). Remove the interior door handles, then disconnect
the wire clips to the switches. Your panel is held in place by snap in clips;
use a small pry bar to pull them from the door (try to get as close to, or
directly under the clips to prevent them from tearing out of the door panel).
Once the clips are pulled, pull the panel upward to remove it from the door.
Install in reverse.
If you don't have power windows you will have to remove the manual window crank. It is held in place by a clip on the back side of the base. To remove the clip, you will need a small hook (kind of like a knitting needle). Put the hook in behind the base, and grab the clip and pull it off. To replace it, slide the clip back on the window crank, and snap it back on the door.
Posted on May 25, 2009
The heater core is located under the dash, in the center. The container holding the core looks like a black plastic box. Remove the ash tray for easier access. You may have to also remove some other covers under the dash. You must first drain the radiator then you have to disconnect the hoses. There are two hoses connected to nipples of the heater core that go thru the center of the firewall. Remove the screws that hold on the cover to the heater core. Then you should be able to get the old one out. There might be a couple of other minor steps but I'm sure you can figure them out. For re-installation just go in reverse order to put it all back together.
Posted on May 25, 2009
SOURCE: Buick LeSabre side mirror
Yes, you will have to take the door panel off. I'm attempting to replace the passenger side mirror at the moment and have the old one out, but can't get enough access to the bolts to attach the new one without opening up the side panel.
I'm still looking into how to do this, as I haven't found the right sequence for removing it. I'll try to post how when I figure it out, as I also hate paying for a manual for simple repairs.
Posted on Dec 29, 2009
Tips for a great answer:
Nov 02, 2016 | 2005 Buick LeSabre
Aug 04, 2015 | 2001 Buick LeSabre Limited
Jan 19, 2013 | 2005 Buick LeSabre
Push the mirror lens upward so it faces the roof of your Buick LeSabre.
Place the eight-pointed star head of the Torx driver into the setscrew located in the base of the rearview mirror. Turn the Torx driver counterclockwise. This releases the clamping pressure on the mirror.
Slide the mirror upwards to remove it from its metal bracket.
Place the base of the replacement mirror against the windshield, directly above the metal bracket. Slide the mirror down into the bracket. The bracket has a groove on each side into which the mirror will slide.Secure the mirror to the bracket by tightening the setscrew clockwise with the Torx driver.
May 04, 2011 | 1999 Buick LeSabre
Mar 01, 2011 | 2005 Buick LeSabre
Aug 06, 2010 | 1999 Buick LeSabre
Jun 03, 2010 | 1998 Buick LeSabre
Nov 04, 2009 | 2005 Buick LeSabre
Jul 26, 2009 | 1999 Buick LeSabre
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: