Question about Cars & Trucks
Is your radiator Plastic and metal? or Just metal? where is the crack? Can you see the "crack" or can you just see it leaking antifreze? It could be a hose clamp leak,or small hole? At this point without knowing that it is a crack for sure ,all I can say is check hose clamps ,they also sell a product called Bars . Any auto parts store has ,it seals small radiator leaks ,be sure to follow directions on bottle! I would recommend changing the raditor if your keeping the car,or really depend
on it,they like to go bad at the worst possible times!
Posted on Feb 10, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
well cking fuses are for both headlights neither would work. while these bulbs produce heat, make sure not to touch glass, or get any debris, on the capsule prior to install. is so clean with rubbung alcohol
ck socket for corrosion, make sure you are getting voltage to socket.
if all is good you will have headlites
Posted on Apr 12, 2009
eng.temp.coolant sensor,located on thermostat housing,if u think sensor is defect,this check will make engine light come on,unplug elect. connection on sensor while car is idling,cooling fan will start up within 1 min.if it doesnt check fans power circuit.or apply batt.voltage directly to fan to see if fan will work.
Posted on Apr 26, 2009
USUALLY I LOOSEN ALL OF THE BOLTS BEFORE I TAKE THE BELT OFF TO HELP KEEP THE PULLEY FROM TURNING... USE A LONG SCREWDRIVER OR PRYBAR .. PUT IT BETWEEN THE TWO OTHER BOLTS AND LOOSEN THE 3RD. CONTINUE TILL ALL ARE LOOSE.. IF YOU HAVE ALREADY REMOVED 2 OF 3 BOLTS THEN RE INSTALL THE OTHER 2 A FEW THREADS SO YOU CAN PUT THE SCREWDRIVER IN BETWEEN THEM TO STOP THE PULLEY FROM TURNING.
Posted on May 14, 2009
depending on how many miles you have on the car i would look at the lower hose first; the other common problem on a 93 cav would be the lower radiator neck or radiator leak; the lower hose has less pressure on it than the upper so sometimes finding the leak can be tricky. with the engine off and cold squeeze the lower hose by the radiator to see if any fluid comes out. otherwise you would have to pressurize the system to find the leak
Posted on Sep 16, 2009
Testimonial: "i knew where the leak was just wanted to make certain it was lower hose thanks so much"
Tips for a great answer:
Jan 26, 2012 | 1996 Chevrolet Cavalier
Mar 20, 2010 | 1996 Chevrolet Cavalier
Dec 19, 2009 | 1996 Chevrolet Cavalier
Aug 25, 2009 | 1996 Chevrolet Cavalier
Jul 12, 2009 | 1996 Chevrolet Cavalier
Apr 26, 2009 | Chevrolet Cavalier Cars & Trucks
Mar 08, 2009 | 1996 Chevrolet Cavalier
Sep 14, 2008 | 1996 Chevrolet Cavalier
43 people viewed this question
Usually answered in minutes!